ملخص المحتوى في الصفحة رقم 1
USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
ملخص المحتوى في الصفحة رقم 2
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to i
ملخص المحتوى في الصفحة رقم 3
Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services t
ملخص المحتوى في الصفحة رقم 4
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chlorid
ملخص المحتوى في الصفحة رقم 5
FCC DECLARATION OF CONFORMITY Model Number: PLE383 / PLE383S Trade Name: iiyama Responsible party: IIYAMA North America, Inc. Address: 65 West Street Road, Suite 101B, Warminster, PA18974 U.S.A. Telephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
ملخص المحتوى في الصفحة رقم 6
TABLE OF CONTENTS FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE ...................................................................... 3 CLEANING ....................................................................................... 3 BEFORE YOU OPERATE THE MONITOR
ملخص المحتوى في الصفحة رقم 7
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
ملخص المحتوى في الصفحة رقم 8
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may
ملخص المحتوى في الصفحة رقم 9
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find sl
ملخص المحتوى في الصفحة رقم 10
BEFORE YOU OPERATE THE MONITOR FEATURES 38cm (15.0") TFT Color LCD Monitor Supports Resolutions up to 1024 × 768 2 High Contrast 400:1 / High Brightness 250cd/m / Quick Response Time 16ms ProLite E383-W1X / E383-B1X / E383-S1X ProLite E383S-W1X / E383S-B1X / E383S-S1X 2 High Contrast 500:1 / High Brightness 250cd/m ProLite E383-W2X / E383-B2X / E383-S2X ProLite E383S-W2X / E383S-B2X / E383S-S2X 19.8mm Narrow Bezel & Slim Design Multi-Color Control Supports sRGB Interna
ملخص المحتوى في الصفحة رقم 11
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. Power Cable* D-Sub Signal Cable Stand Information CD Quick Start Guide For ProLite E383S Audio Cable The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a CAUTION * power supply higher than this rating, then a power
ملخص المحتوى في الصفحة رقم 12
CONTROLS AND CONNECTORS AC IN LINE IN D-SUB Power Switch / Power Indicator (POWER) A Green: Normal operation (ProLite E383 / ProLite E383-B / ProLite E383-S / NOTE ProLite E383S) Blue: Normal operation (ProLite E383S-B / ProLite E383S-S) Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal. Auto Button (AUTO) B See page 12 for Auto Set-up. Exit
ملخص المحتوى في الصفحة رقم 13
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 24 for CONNECTOR PIN B ASSIGNMENT.) * Connect the monitor to the audio equipment with the Audio Cable when using the audio features. C D Connect the Power Cable to the monitor first and then to the power supply. NOTE NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect c
ملخص المحتوى في الصفحة رقم 14
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 24: COMPLIANT TIMING. Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP by connecting the monitor to DDC1/2B compliant computer with the Signal Cable supplied. For installation on Windows 95/98/2000/Me/XP: The Monitor Information File for iiyama monitors may be necessary. For installing procedure, see “Driv
ملخص المحتوى في الصفحة رقم 15
ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 0-25 degrees backward. In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor’s angle to your own pre
ملخص المحتوى في الصفحة رقم 16
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are ((((( additional Menu pages which can be switched by using the +/– Buttons. Displayed while sRGB is active. Displayed while L
ملخص المحتوى في الصفحة رقم 17
ADJUSTMENT MENU CONTENTS Menu : 1 Menu:1 1024 × 768 H: 60.0 KHz V: 75.0 Hz Adjustment Item Problem / Option Button to Press Too dark 1 Brightness * Direct Too bright Too dull Contrast Direct Too intense 2 Clock * To correct flickering text or lines 2 Phase * To correct flickering text or lines Too low V-Position Too high Too far to the left H-Position Too far to the right Return to Menu Highlight “Menu : 1” again. 1 * Adjust the Brightness when you are using the monitor in
ملخص المحتوى في الصفحة رقم 18
Menu : 2 Menu:2 1024 × 768 H: 60.0 KHz V: 75.0 Hz Adjustment Item Problem / Option Button to Press NO Return to Menu. 3 Auto Set-up * Adjust Clock, Phase, V-Position and H-Position YES Direct automatically. The Auto Set-up is not performed when the Setting Off signal input is changed. Adjust Clock, Phase, V-Position and H-Position On automatically when the signal input is changed. NOTE The brightness of screen varies for several seconds during t
ملخص المحتوى في الصفحة رقم 19
Menu : 2 Adjustment Item Problem / Option Off Gamma Mode1 High contrast Dark Mode2 Off Normal Economy Mode Mode1 Brightness of back-light is reduced. Direct Mode2 Brightness of back-light is reduced more than Mode1. NOTE is displayed while Economy Mode is active. Return to Menu Highlight “Menu : 2” again. Direct You can skip the Menu pages and display an adjustment scale directly by using the following button operations. Economy Mode: When OSD menu is off, holding the Menu button for 1-
ملخص المحتوى في الصفحة رقم 20
Menu : 3 Menu:3 1024 × 768 H: 60.0 KHz V: 75.0 Hz Problem / Option Button to Press Adjustment Item Too soft Direct Volume * Too loud NOTE is displayed while Mute is active. 1 2 3 4 5 OSD Position You can move the OSD display area to any one of the following 5 positions within the overall display: Press the + Button to move the OSD in numerical order. Press the – Button to move the OSD in reverse numerical order. English English Language Deutsch
