ملخص المحتوى في الصفحة رقم 1
HP LV1561w, LV1561ws, and CQ1569 LCD
Monitors
User Guide
ملخص المحتوى في الصفحة رقم 2
© 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use
ملخص المحتوى في الصفحة رقم 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
ملخص المحتوى في الصفحة رقم 4
iv About This Guide ENWW
ملخص المحتوى في الصفحة رقم 5
Table of contents 1 Product Features HP LCD Monitors ................................................................................................................................. 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 2 Maintenance Guidelines ..............................................................................................................
ملخص المحتوى في الصفحة رقم 6
Appendix C Agency Regulatory Notices Federal Communications Commission Notice ................................................................................... 22 Modifications ...................................................................................................................... 22 Cables ................................................................................................................................ 22 Declaration of Conformity for Products Marked with the FCC
ملخص المحتوى في الصفحة رقم 7
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: 39.5 cm (15.6-inch) viewable area display ● ● 1366 x 768 resolution, plus full-screen support for lower resolutions ● Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● Tilt capability ● Video signal input to support VGA analog with VGA signal cable provided Removable base and
ملخص المحتوى في الصفحة رقم 8
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 24 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
ملخص المحتوى في الصفحة رقم 9
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
ملخص المحتوى في الصفحة رقم 10
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Installing the Monitor Base To install the monitor base: 1. Place the base on a smooth, flat surface. 2. Align the pedestal column on top of the base and press down to install. 3. Using both hands, position the monitor over the pedestal base. NOTE: Do not install the base if the monitor will be used on a wall, swing a
ملخص المحتوى في الصفحة رقم 11
Identifying Rear Components Figure 3-2 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 VGA Connector Connects the VGA (15-pin D-Sub) cable to the monitor. 3 Audio Port (select Connects the audio cable (provided with select models) to models) the monitor. ENWW Identifying Rear Components 5
ملخص المحتوى في الصفحة رقم 12
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect the power cable to the AC power connector on the back of the monitor. WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by u
ملخص المحتوى في الصفحة رقم 13
CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time. To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. Mounting the Monitor You can remove the monitor base to mount the monitor on a wall, a swing arm, or other mounting fix
ملخص المحتوى في الصفحة رقم 14
7. Refer to the user manual that came with the optional mounting fixture additional mounting instructions. Figure 3-4 Removing the Monitor Base 8 Chapter 3 Setting Up the Monitor ENWW
ملخص المحتوى في الصفحة رقم 15
Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the back of the monitor. ENWW Locating the Rating Labels 9
ملخص المحتوى في الصفحة رقم 16
4 Operating the Monitor Installing the Driver You can install the monitor-driver INF and ICM files from the CD (included with select models) or download from the Internet. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed. 2. Select the language. 3. View the Monitor Driver Software Readme file. 4. Select Install Monitor Driver Software. 5. Follow the on-screen instructions. 6. Ensure that
ملخص المحتوى في الصفحة رقم 17
Setting the Optimal Resolution The recommended resolution for this monitor is 1366 x 768. To configure the monitor to this resolution, do the following. 1. Click the Windows Start button, and then select Control Panel. 2. Under Appearance and Personalization, select Adjust Screen Resolution. 3. Set the resolution slide bar to 1366 x 768. Front Panel Controls The front panel control buttons lets you adjust the monitor’s picture settings to your personal preferences. Table 4-1 Monitor Front Panel
ملخص المحتوى في الصفحة رقم 18
Table 4-1 Monitor Front Panel Controls (continued) Control Function 4 Menu Press to open the OSD window. 5 Power Turns the monitor on and off. LED status: ● Full Power Mode - Green or Blue ● Active-off Mode - Orange or Red Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu. To access the OSD and adjust screen settings base on your viewing preference, do the following: 1. If the monitor is not already on, press the power button to turn on th
ملخص المحتوى في الصفحة رقم 19
OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. Table 4-2 OSD Menu Icon Main Menu Submenu Description Brightness Adjustable scale Adjusts the brightness level of the screen. Contrast Adjustable scale Adjusts the contrast level of the screen. Image Control Adjusts the screen image. (VGA input only) Auto Adjustment Automatically adjusts the screen image. Horizontal Position Adjusts the position of the screen image left a
ملخص المحتوى في الصفحة رقم 20
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Custom Settings saved when user adjusts the Brightness, Contrast, or Color in one of the QuickView options. Language Selects the language in which the OSD menu is displayed. Management Selects the power-management features of the monitor. Volume Adjusts the volume level. OSD Control Adjusts the position of the OSD menu screen to: Horizontal OSD Position-Changes the viewing position of ● the OSD menu to the left or right area
