ملخص المحتوى في الصفحة رقم 1
User’s Guide
FP9419 LCD Monitor
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
The information in this document is subject to change without notice. ® Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE
ملخص المحتوى في الصفحة رقم 4
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Apparatus Claims of U
ملخص المحتوى في الصفحة رقم 5
Contents Contents 1Product Features 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . 2–3 Shipping the Monitor . . . . . . . . . . . . . . . . . . . . . 2–4 Removing the Monitor Base . . . . . . . . . . . . . . 2–4 3 Setting Up the Monitor Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . 3–1 Installing t
ملخص المحتوى في الصفحة رقم 6
Contents Adjusting Screen Quality. . . . . . . . . . . . . . . . . . 4–13 Optimizing Analog Video . . . . . . . . . . . . . . 4–13 Entering User Modes . . . . . . . . . . . . . . . . . . 4–14 Power Saver Feature. . . . . . . . . . . . . . . . . . . . . 4–15 A Troubleshooting Solving Common Problems . . . . . . . . . . . . . . . . . A–1 Using the World Wide Web . . . . . . . . . . . . . . . . A–3 Preparing to Call Technical Support . . . . . . . . . . . A–4 Locating the Rating Label . . . . . . .
ملخص المحتوى في الصفحة رقم 7
1 Product Features The FP9419 LCD Monitor (Liquid Crystal Display) has an active matrix, Thin-Film Transistor (TFT) screen. The flat panel monitor features include: ■ Large 19-inch (48.3 cm) diagonal viewable area display. ■ 1280 × 1024 factory-set resolution, plus full-screen support for lower resolutions. ■ Dual video inputs supported: ❏ VGA Analog ❏ DVI-D supports Digital signal input ■ VGA analog and DVI-D digital signal cables included. ■ Fast response time of 16ms provides better experi
ملخص المحتوى في الصفحة رقم 8
Product Features ■ Easy to view from a sitting or standing position, or while moving from one side of the monitor to the other. ■ Tilt adjustment capabilities. ■ Removable pedestal and VESA 100mm mounting holes for flexible mounting solutions including wall mounting. ■ Security lock slot. ■ Plug and Play capability, if supported by your system. ■ On-Screen Display (OSD) adjustments for ease of setup and screen optimization. Choose English, French, German, Italian, Spanish, or Dutch. ■ Integ
ملخص المحتوى في الصفحة رقم 9
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, see “Power Cord Set Requirements” in Appendix B. WARNING: To reduce the risk of electric shock or damage to your Å equipment, do not disable the power cord grounding feature. The grounding plug is an important safety fea
ملخص المحتوى في الصفحة رقم 10
Safety and Maintenance Guidelines Maintenance Guidelines To enhance the performance and extend the life of your monitor: ■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. ■ Adjust only those controls that are described in the operating instructions. ■ Use only a power source and connection appropriate for this monitor, as i
ملخص المحتوى في الصفحة رقم 11
Safety and Maintenance Guidelines ■ Keep your monitor in a well-ventilated area, away from excessive light, heat or moisture. ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface. ■ When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, d
ملخص المحتوى في الصفحة رقم 12
Safety and Maintenance Guidelines Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. When you ship the monitor, you should remove the base from the pedestal. Removing the Monitor Base Read the following warning and caution statements before beginning the procedure. WARNING: Do not remove the base from the pedestal while Å the monitor is standing in the upright position. Attempting to remove the base from the pedestal
ملخص المحتوى في الصفحة رقم 13
Safety and Maintenance Guidelines 3. On the bottom side of the base, carefully slide a slotted screwdriver into the opening 1, as shown in the following illustration. Push the screwdriver towards the top of the monitor, slide the base 2 slightly back, towards the bottom of the monitor, to unlock it. Pull the base completely away from the pedestal with a firm grip. 1 2 Removing the Base from the Monitor Pedestal 4. Fold the pedestal hinge in the shipping position to the back of the monitor
ملخص المحتوى في الصفحة رقم 14
Safety and Maintenance Guidelines 2–6 User’s Guide
ملخص المحتوى في الصفحة رقم 15
3 Setting Up the Monitor Before You Begin 1. Unpack the monitor. Make sure all contents are included. Store the boxes. 2. Ensure that the power is turned off to the monitor, computer system, and other attached devices (monitor ships in off position). 3. Determine the video cable or cables that you will connect from the computer video card outputs to the VGA and DVI inputs on the monitor. You can connect one or both cables. ❏ VGA cable: Standard VGA 15-pin cable. ❏ DVI-D cable: For digita
ملخص المحتوى في الصفحة رقم 16
Setting Up the Monitor Installing the Monitor You can install the monitor on a desktop or wall mount. Place the monitor in a convenient, well-ventilated location near your computer. If the monitor will be installed on a: ■ Desktop or table, see the “Placing the Monitor on a Desktop” section. ■ Wall, swing arm, or other mounting fixture, see the “Mounting the Monitor” section. Connect the monitor after you have installed it. See “Connecting the Monitor”. Placing the Monitor on a Desktop
ملخص المحتوى في الصفحة رقم 17
Setting Up the Monitor 2. Place the pedestal all the way towards the bottom of the monitor as shown in the following illustration 1. 2 3 1 Inserting the Base onto the Monitor Pedestal 3. Remove the plastic cap on the pedestal end 2. 4. Using both hands, firmly push the circular base into the bottom of the pedestal to lock the pedestal base in place 3. When the base locks, it will make a clicking sound. Make sure the base is securely locked onto the pedestal before continuing with the setu
ملخص المحتوى في الصفحة رقم 18
Setting Up the Monitor Mounting the Monitor Before you mount the monitor on a wall, a swing arm or other mounting fixture, you must remove the monitor pedestal and back mounting cover. You will need a Phillips head screwdriver. Read the following warning and caution statements before beginning the procedure. WARNING: Ensure that the monitor is lying flat, screen down. Å Attempting to remove the pedestal and base from the monitor while it is upright may result in injury to the user. CAUTION
ملخص المحتوى في الصفحة رقم 19
Setting Up the Monitor To install the monitor on a wall, a swing arm or other mounting fixture: 1. Pinch and remove the hinge cover and set it aside 1. Three screws and the hinges are exposed. 2. Lay the monitor down on a flat, soft, protected surface. Turn the pedestal upright. CAUTION: The screen is fragile. Placing the monitor screen down Ä on a flat, soft area prevents scratches, defacing, or breakage. 3. Remove the rectangular back cover 2 as shown in the following illustration. Four
ملخص المحتوى في الصفحة رقم 20
Setting Up the Monitor 6. Remove the pedestal. 7. Replace the hinge cover on the pedestal. 8. Save the screws, back cover, pedestal, and base for future use. 9. Mount the monitor to a swing arm or other mounting fixture. When the back cover has been removed, four threaded mounting holes are exposed on the monitor panel. These mounting holes are spaced 100 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel monitors. Use the
