Friedrich VPRG4 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

VPRG4
Installation Instructions
Return Air Grille/Access Panel
For Vert-I-Pak A Series Units only
.
Please read these instructions completely before attempting installation.
NOTE: These instructions apply to Vert-I-Pak Series units only. Refer to Chassis Installation/Operation Manual
for additional information
Parts Included in this Kit Parts not Included in this Kit
 VPRG4 Return Air Grille / Access Panel  25" x 20" Filter
(58" Tall x 29" Wide)  5/32" Allen wrench for latch
mechanism ope

ملخص المحتوى في الصفحة رقم 2

VPRG4 Installation Instructions Return Air Grille/Access Panel For Vert-I-Pak A Series Units only . Please read these instructions completely before attempting installation. NOTE: These instructions apply to Vert-I-Pak Series units only. Refer to Chassis Installation/Operation Manual for additional information Parts Included in this Kit Parts not Included in this Kit  VPRG4 Return Air Grille / Access Panel  25" x 20" Filter (58" Tall x 29" Wide)  5/32" Allen wrench for latch mechanism ope

ملخص المحتوى في الصفحة رقم 3

Step 1 Determine the orientation of the door. View A The VPRG4 Kit comes with two mounting hinges. Left hinge One mounts to the left side of the opening and locates the return air openings at the lower portion of the door (View A). The other mounts the hinge to the right side of the opening and locates the return air openings at the upper portion of the door (View B). This provides an option for the direction that the door will open. More importantly it can aid in sound attenuation by loca

ملخص المحتوى في الصفحة رقم 4

Step 2A Step 3A Mount the Side Bracket Install door onto the to the left side of the wall Side Bracket. Be opening. The Side Bracket sure that the access must be plumb (vertical). door has engaged Secure with four the three tabs, and # 1 8 x 1 /4" pan-head screws. the door is against NOTE: Hinge tabs must the side mounting point upward. bracket. Mounting the Side Bracket Mount the Door on the Side Bracket Step 4A Step 5A Close the door. Draw a temporary horizontal reference line on

ملخص المحتوى في الصفحة رقم 5

Step 2B Step 3B Mount the Side Bracket to Install door onto the the right side of the wall Side Bracket. Be opening. The Side Bracket sure that the access must be plumb (vertical). door has engaged Secure with four the three tabs, and # 1 8 x 1 /4" pan-head screws. the door is against NOTE: Hinge tabs must the side mounting point upward. bracket. Mounting the Side Bracket Mount the Door on the Side Bracket Step 4B Step 5B Close the door. Draw a temporary horizontal reference line on