ملخص المحتوى في الصفحة رقم 1
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal
Cable (D-Sub or DVI)
2-3.Connecting the Signal
Cable (ADC)
2-4.Connecting Two PCs to
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt
This manual is checked under the browser settings shown
Stand
below. Text size can change for another one through
browser setting.
3. ScreenManager
3-1.How to use the
ملخص المحتوى في الصفحة رقم 2
7. CLEANING 8. SPECIFICATION 9. GLOSSARY APPENDIX/ ANHANG/ ANNEXE FCC Declaration of Conformity Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
ملخص المحتوى في الصفحة رقم 3
This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. No part of this manual may
ملخص المحتوى في الصفحة رقم 4
PowerManager is a trademark of EIZO NANAO CORPORATION. ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. ® As an ENERGY STAR Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase.
ملخص المحتوى في الصفحة رقم 5
IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] If the unit begins to emit smoke, smells like something is b
ملخص المحتوى في الصفحة رقم 6
Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have t
ملخص المحتوى في الصفحة رقم 7
To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so
ملخص المحتوى في الصفحة رقم 8
Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric s
ملخص المحتوى في الصفحة رقم 9
When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment dam
ملخص المحتوى في الصفحة رقم 10
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels:99.9994%or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please con
ملخص المحتوى في الصفحة رقم 11
Thank you very much for choosing an EIZO Color Monitor. ● The exclusive use calibration software calibrates the monitor characteristics and generate colorprofile. ● Dual inputs compliant ● DVI Digital input (TMDS) compliant. ● ADC (Apple Display Connector) inputs compliant. ● [Horizontal scanning frequency] Analog: 31 - 94 kHz Digital: 31 - 76 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz Vertical (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61 Hz) Digital: 59
ملخص المحتوى في الصفحة رقم 12
* LCD Monitor * Calibration software * Power Cord "ColorNavigator" (in the CD-ROM) * Analog Signal Cable (FD-C16) * Setup Guide * Digital Signal Cable (FD-C39) * ColorNavigator Quick Reference * EIZO USB Cable (MD-C93) * LIMITED WARRANTY * EIZO LCD Utility Disk * Adjustment Certificate * User's Manual (in the CD-ROM) * Cleaning kit "ScreenCleaner" * Hood * Please retain the packing materials for future transference. Front
ملخص المحتوى في الصفحة رقم 13
® (1) ScreenManager (2) Mode Switch (3) Auto Adjustment Switch (4) Enter Switch (5) Directing Switch (Left, Down, Up, Right) (6) Input Signal Selection Switch (7) Power Switch *1 (8) Indicator lamp Name The monitor status when each lamp on Custom mode of FineContrast Mode Custom sRGB mode of FineContrast Mode sRGB EMU mode of FineContrast Mode EMU Left Side CAL mode of FineContrast Mode CAL Notify that the monitor needs to be recalibrated in CAL Cal. Alert mode or EMU mode. Adj. Lock The monit
ملخص المحتوى في الصفحة رقم 14
(9) USB Port (2 Downstream) (10) USB Port (1 Upstream) *2 (11) Height Adjustable Stand (Detachable) *3 (12) Security Lock Slot (13) DVI-I Input Connector (SIGNAL 1, SIGNAL2) (14) Power Connector *2 The LCD monitor can be used with an optional arm stand by removing the stand. (See "2-6. How to remove the Tilt Stand"). *3 Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system. For further information, please consult: Kensington Technology Group 28
ملخص المحتوى في الصفحة رقم 15
Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Dot Clock Remarks 640 x 480 60 Hz VGA 640 x 480 67 Hz Apple Macintosh 640 x 480 ~ 85 Hz VESA 720 x 400 70 Hz VGA TEXT 800 x 600 ~ 85 Hz
ملخص المحتوى في الصفحة رقم 16
Digital Input The monitor supports the following resolutions only. Resolution Frequency Dot Clock Remarks 640 x 480 60 Hz VGA 720 x 400 70 Hz VGA TEXT 800 x 600 60 Hz VESA 1024 x 768 60 Hz VESA 1280 x 960 60 Hz VESA 162 MHz (Max.) 1280 x 1024 60 Hz VESA 1600 x 1200 60 Hz VESA 1680 x 1050 60 Hz VESA CVT 1680 x 1050 60 Hz VESA CVT RB (Reduced Blanking) 1920 x 1200 60 Hz VESA CVT RB (Reduced Blanking) * Be sure that the power switches of both the PC and the monitor are OFF. 1.Open the cabl
ملخص المحتوى في الصفحة رقم 17
Analog Input Signal Cable Connector PC Signal Cable (FD-C16 Video Output Standard graphics card enclosed) Connector / D-Sub Power Macintosh G3 mini 15 pin (Blue & White) Input Connector Power Mac G4 (VGA) (monitor) / DVI Signal Cable (FD-C16 Video Output Macintosh enclosed) +Adapter* Connector / D-Sub 15 pin Input Connector (monitor) / DVI *Macintosh Adapter (Optional) Digital Input Signal Cable Connector PC Signal Cable (FD-C39 Video Output Digital graphics card enclosed) Connector
ملخص المحتوى في الصفحة رقم 18
3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the monitor. * The cables are recommended to lead with slight sag for the smooth motion of the stand. * It's recommended to put away the signal cables into the left cable holder, and the USB cable and power cord into the right cable holder. 4.Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country.
ملخص المحتوى في الصفحة رقم 19
5.Turn on the monitor's main power and then switch on the PC's power. The indicator lamp, "ON", will light up. If an image does not appear, refer to the "6. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. * Adjust brightness of the screen depending on the brightness of your environment. * Be sure to ta
ملخص المحتوى في الصفحة رقم 20
Signal Cable Connector PC Signal Cable (FD-C39 Video Output Power Mac G4 / G5(ADC) enclosed) +ADC-DVI Connector / ADC display adapter Input Connector (commercially available) (monitor) / DVI * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor. 3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the
