ملخص المحتوى في الصفحة رقم 1
User’s Manual
‚
FlexScan
T566
Color Display Monitor
Important
Please read this User's Manual carefully to familiarize yourself with safe
and effective usage procedures. Please retain this manual for future
reference.
ملخص المحتوى في الصفحة رقم 2
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2002 by EIZO NANAO CORPORATION.
ملخص المحتوى في الصفحة رقم 3
English TABLE OF CONTENTS PRECAUTIONS ...................................................................................4 1. INTRODUCTION .....................................................................................8 1-1. Features ........................................................................................................8 1-2. Package Contents..........................................................................................8 1-3. Controls & Connectors .......
ملخص المحتوى في الصفحة رقم 4
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit sm
ملخص المحتوى في الصفحة رقم 5
English WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Place the unit on a strong, stable surface. A unit placed on an inadequate surface may fa
ملخص المحتوى في الصفحة رقم 6
English WARNING The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. Use the correct voltage. * Do not overload your power circuit, as this may result in fire or electric shock. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage. * Do not overload your power circuit, as this may result in fire
ملخص المحتوى في الصفحة رقم 7
English CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury or equipment damage. Do not move it alone. Always work with another person. Moving it alone may cause lower back pain. Also note that the unit is heavier at the front than at the rear. OK Do not block the ventilation slots on the cabinet. * Do not place boo
ملخص المحتوى في الصفحة رقم 8
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Display Monitor. 1-1. Features • Horizontal scanning frequency of 30-96kHz Vertical scanning frequency of 50-160 Hz • Support to sRGB standard (See page 31.) 2 • Max Brightness 400 cd/m bright screen (when the movie mode is selected.) • The color restoration circuit that can keep stable brightness and color-tone for a long period supported (See page 16.) • Fine contrast modes, to adjust the most suitable brigh
ملخص المحتوى في الصفحة رقم 9
English 1-3. Controls & Connectors Front Rear Bottom (1) BNC/D-SUB Selection Button (2) AUTO/FINE MODE button Push the button lightly: Fine Contrast Mode Selection button Press and hold the button more than 2 seconds: AUTO-SIZING button (3) QuickSet™ Control Pad (Hereinafter “Control Pad”) (4) Power Indicator Green Power is on (Normal mode) Flashing Green Power save (Mode 1) *1 Advance notice of monitor's Off Timer Yellow Power save (Mode 2) *1 Flashing Yellow Power save mo
ملخص المحتوى في الصفحة رقم 10
English 2. INSTALLATION 2-1. Connecting the monitor to the PC NOTE • Be sure that the power switches of both of the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Signal Cable Connector PC Standard Graphics Board Signal Cable (enclosed) D-Sub mini 15 pin connector Macintosh G3 (Blue & White
ملخص المحتوى في الصفحة رقم 11
English WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. 3. Turn on the monitor first, then the PC. Turn on the monitor first, then the PC. The monitor's power indicator will light up (green). The monitor wi
ملخص المحتوى في الصفحة رقم 12
English 2-2. Getting Ready for Operation Try each setting procedure if necessary in the following cases. The display image size and/or position is not appropriate. → Press the AUTO/FINE MODE button on the front panel for more than 2 seconds. The AUTO-SIZING function centers the displayed image, aligning the image's borders with respect to the monitor frame. In general, press the AUTO/FINE MODE button whenever changing the graphics card or the resolution (p. 31), or when image size a
ملخص المحتوى في الصفحة رقم 13
English 3. SCREEN ADJUSTMENT NOTE • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. 3-1. How to use the ScreenManager Up Use the control pad on the front panel. The control pad can be pressed in 5 directions, Enter, Up, Down, Left and Right. Right Left Down Center 1. Entering the ScreenManager Display the ScreenManager Main menu by pressing the Enter of the control pad. Main menu displays the current connector type and frequency of th
ملخص المحتوى في الصفحة رقم 14
English NOTE • Leaving the ScreenManager idle for 45 seconds or more will turn the adjustment off automatically without saving. • The brightness and contrast can be adjusted by pressing the Up, Down, Left and Right keys of the control pad directly. Press the center of the control pad to save and exit the settings after the adjustment. Adjustments and Settings Main Menu Sub menu Adjustments and Settings See page Contrast - Screen contrast and brightness - Size - Screen Size - Positi
ملخص المحتوى في الصفحة رقم 15
English 3-2. Fine Contrast The fine contrast modes differ in brightness and contrast settings. Select the mode that is the best suited to the application in use. The mode can be changed with the AUTO/FINE MODE button that is on the front of the monitor. To select the most suitable brightness mode → Push AUTO/FINE MODE button lightly. Select from the following modes to adjust the most suitable brightness of the screen. Pushing this button displays the fine contrast modes in the followi
ملخص المحتوى في الصفحة رقم 16
English 3-3. Color By using the in the menu, the adjustment mode can be selected from standard mode (to set the color temperature and the color restoration), custom mode (to adjust each color tone, (Red, Green and Blue) and sRGB mode. These modes allow you to adjust the color settings according to your preference. mode to set the color temperature and the color restoration To set the color temperature → Set the . Temperature can be set fr
ملخص المحتوى في الصفحة رقم 17
English mode: to adjust each color, (Red, Green and Blue) → Adjust the < Gain (p. 30)>, < Cutoff (p. 30)> Change the to . The values shown in percentages (%) for both the Cutoff and Gain are available only as a reference tool. [Adjustment Procedure] (1) First, set the monitor to maximum contrast and brightness. (2) Set the color temperature that is close to the desired color. (3) Adjust each color to become a uniform black level by using t
ملخص المحتوى في الصفحة رقم 18
English 3-4. Power Save There are two power save settings. Choose the setting which matches your environment. Set the power saving by using menu. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Complete energy use can only be accomplished by disconnecting the monitor's power supply cord from the plug receptacle. To use the PC's power saving system (VESA DPMS (p. 31)) → Select "ON" in the menu. [Procedure] (1)
ملخص المحتوى في الصفحة رقم 19
English To use the Monitor's off timer system → Select "Enable" in the menu. Without the PC's power saving system, the off timer allows the monitor to enter a power save mode after a predetermined amount of time has lapsed. [Procedure] Select "Enable" and press the left/right keys on the control pad to set the "On period". (1 to 23 hours) [To return to a normal screen] Press any direction of the control pad or to turn the power off then on again to return to a normal scr
ملخص المحتوى في الصفحة رقم 20
English 3-6. Connecting two PCs to the Monitor Two PCs can be connected to the monitor through the BNC/D-Sub input connections on the rear of the monitor. (Example) Power Macintosh G3 Standard graphics (Blue&White) /G4 board MD-C53A (Optional) Selecting the Active input Every time the BNC/D-Sub selection button is pressed, the input changes in order. [Automatically selecting the priority input signal for screen] The monitor will automatically detect the input signal of either t
