Dell P793 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Dell™ P793 Color Monitor
Quick Setup Guide
Safety Instructions
Observe the following safety guidelines when connecting and using your monitor:
 Be sure that your monitor is electrically rated to operate with the AC power available in your location.
 Locate your monitor near an easily accessible electrical outlet.
 Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or
touched with a sharp or abrasive implement.
 Put your monitor in

ملخص المحتوى في الصفحة رقم 2

Monitor Controls and Indicators 1,2 Select(Up & Down) button These buttons allow you to highlight items using the on-screen display. 3 MENU button This button is used with the OSD system to activate a highlighted function for adjustment. 4,5 Adjust(Left & Right) button These buttons allow you to adjust items using the on-screen display. 6 Power indicator This light glows green during normal operation. 7 Power button Use this button to turn the monitor on and off. Driver Installation Use the

ملخص المحتوى في الصفحة رقم 3

To manually install or update the driver, perform the following steps: 1. Click Start Settings Control Panel and then double-click Display. 2. In the Display Properties window, click the Settings tab, and then click Advanced. 3. Click the Monitor tab, and then click Change. 4. When the Update Device Driver Wizard dialog box appears, follow the steps in the previous paragraph. ® ® Microsoft Windows 95 Operating System First determine the Windows 95 version installed on your computer by right

ملخص المحتوى في الصفحة رقم 4

No Image Is Displayed on the Monitor If the monitor power indicator is on but no image appears on the display, perform the following checks:  Ensure that the video connector is seated properly. Tighten the connector screws securely with your fingers.  Ensure that the computer is on.  Increase brightness and contrast controls.  Turn off the monitor and unplug the signal cable. Check the cable connector for bent or broken pins.  With the signal cable still disconnected, turn on the monitor.