ملخص المحتوى في الصفحة رقم 1
VW22A Series
LCD Monitor
User Guide
ملخص المحتوى في الصفحة رقم 2
First Edition February 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1)
ملخص المحتوى في الصفحة رقم 3
Contents Notices ......................................................................................................... iv Safety information ....................................................................................... v Care & Cleaning .......................................................................................... vi Takeback Services ..................................................................................... vii Chapter 1: Product introduction 1.1 Welcome
ملخص المحتوى في الصفحة رقم 4
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
ملخص المحتوى في الصفحة رقم 5
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure al
ملخص المحتوى في الصفحة رقم 6
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cl
ملخص المحتوى في الصفحة رقم 7
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. Takeback Services ASUS recycling and takeback prog
ملخص المحتوى في الصفحة رقم 8
viii
ملخص المحتوى في الصفحة رقم 9
1.1 Welcome! ® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.2 Package contents Check your package for the following items: LCD monitor Monitor base Quick start guide Warranty card Power cord VGA cable
ملخص المحتوى في الصفحة رقم 10
1.3 Monitor introduction 1.3.1 Front view 1 2 3 4 5 1. button: • Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. • Automatically adjusts the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only). 2. • Decreases values or moves your selection left/down. • Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function). 3. MENU button: • Turns on the OSD menu.
ملخص المحتوى في الصفحة رقم 11
5. Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. Status Description Blue ON Amber Standby mode OFF OFF 1.3.2 Back view DVI VGA 4 Rear connectors 1. Audio-in port. This port connects PC audio source by the bundled audio cable. (VW22AT/VW22AS only) 2. AC-IN port. This port connects the power cord. 3. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection. (VW22AT/VW22AN only) 4. VGA
ملخص المحتوى في الصفحة رقم 12
1.3.3 QuickFit Function The QuickFit function allows users have a preview of the document or photo layout directly on screen without printing test copies. To activate QuickFit, press the QuickFit hotkey, and then press the MENU key to switch between different pattern sizes. Alignment Grid Photo 8x10, 5x7 Photo 4x6, 3x5, 2x2 When QuickFit is activated, press the control buttons on the front panel to make adjustments. The QuickFit OSD displayed in the lower right corner of the screen will gu
ملخص المحتوى في الصفحة رقم 13
2.1 Assembling the monitor base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Connect the base with the arm according to the drawing below. A click shows that the base has been connected successfuly. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most
ملخص المحتوى في الصفحة رقم 14
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes (Figure 1). 3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide out the arm/base to detach it from the monitor (Figure 2). Rubbers in the screw holes Two screws Arm/base Figure 1 Figure 2 We recommend that you
ملخص المحتوى في الصفحة رقم 15
2.4 Connecting the cables 1. Connect the cables as the following instructions: • To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port. • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input, the other end to a power outlet. • To connect the VGA/DVI cable: a. Plug one end of the VGA/DVI cable to the monitor’s VGA/DVI port. b. Connect the other end of the VGA/D
ملخص المحتوى في الصفحة رقم 16
2-4 Chapter 2: Setup
ملخص المحتوى في الصفحة رقم 17
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press , and to navigate through the functions. Highlight the desired function and press the MENU button to activate it. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight the desired sub-menu function and press the MENU button to activate it. 3. Press , and to change the settings of the selected function. 4. To e
ملخص المحتوى في الصفحة رقم 18
2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., Skin Tone and Smart View from this menu. • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function. • Contrast: the adjusting range is from 0 to 100. • Saturation: the adjusting range is from 0 to 100. • Color Temp.: contains four modes including Cool, Normal, Warm, and User Mode. • Skin Tone: contains three color modes including Reddish, Natural, and Yellowish. • Smart View:
ملخص المحتوى في الصفحة رقم 19
4. Input Select In this function, you can select your desired input source. 5. System Setup Allows you to adjust the system. • Splendid Demo Mode: splits the screen into two for Splendid modes comparison. • Volume: the adjusting range is from 0 to 100. • ECO Mode: reduces power consumption. • OSD Setup: * Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables th
ملخص المحتوى في الصفحة رقم 20
3.2 Specificatio ns summary (VW22AT) Panel Type TFT LCD Panel size 22”W (16:10, 55.88 cm) wide screen Max. Resolution 1680 x 1050 Pixel pitch 0.282 mm 2 Brightness (Typ.) 250 cd/m Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.) 50,000,000:1 (with ASCR on) Viewing angle(H/V) CR>10 170˚/160˚ Display colors 16.7 M Response time 5 ms SPLENDID™ Video Yes Enhancement SPLENDID™ selection 6 video preset modes (by hotkey) Auto adjustment Yes (by hotkey) Color temperature selection 4 color temperatu
