AMX MVP-7500 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
MVP-7500 Modero Wireless Touch Panel (Firmware version G4)
For more detailed installation, configuration, programming, file transfer, and
MVP-7500 Panels Specifications (Cont.)
operating instructions refer to the MVP-7500 and MVP-8400 Modero
Panel LCD  Panel type: TFT Color Passive-Matrix
ViewPoint Touch Panels Instruction Manual, available on-line at
Parameters:  Aspect ratio: 4 x 3
2
 Brightness: 120 cd/m
www.amx.com.
 Channel transparency: 8-bit Alpha blending
 Co

ملخص المحتوى في الصفحة رقم 2

4. From the Service Set Identifier keyboard, enter the SSID name used on Panel Calibration, Setup, and System Connection your Wireless Access Point. 1. Press down and hold both the bottom-left and the bottom-right 5. Press the Encryption field until it reads WEP64 or WEP128. The pushbuttons simultaneously for10 seconds to open the Calibration page. 64/128 selection reflects the bit-level of encryption security previously 2. Calibrate the panel by pressing over the two cross-hairs. When done