ملخص المحتوى في الصفحة رقم 1
SyncMaster 215TW
Install drivers Install programs
ملخص المحتوى في الصفحة رقم 2
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire.
ملخص المحتوى في الصفحة رقم 3
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. Do not connect t
ملخص المحتوى في الصفحة رقم 4
This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. Dropping the product may cause damage to the product or personal injury. Do not place the product on the floor. Someone, specifically children could trip over it. Do not place the product on an unstable or small surface area. Place the product on an even, stable surface, as the product may fall and cause harm to
ملخص المحتوى في الصفحة رقم 5
Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inch) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slig
ملخص المحتوى في الصفحة رقم 6
Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or back). This may cause an electric shock or fire. Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. This may cause an electric shoc
ملخص المحتوى في الصفحة رقم 7
Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center . Keep the product away from combustible chemical sprays or inflammable substances. This may cause an explosion or fire. Never insert anything metallic i
ملخص المحتوى في الصفحة رقم 8
To ease eye strain, take at least a five-minute break after every hour of using . the monitor Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and
ملخص المحتوى في الصفحة رقم 9
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, Monitor Driver, Warranty Card Quick Setup Guide Natural Color, MagicTune™, (Not available in all locations) MagicRotation software Cable
ملخص المحتوى في الصفحة رقم 10
D-sub Cable Power Cord Sold separately S-Video Cable RCA Cable Component Cable DVI Cable Audio Cable Front MENU button Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
ملخص المحتوى في الصفحة رقم 11
Adjust buttons [ ] These buttons allow you to adjust items in the menu. MagicBright™ is a new feature providing optimum viewing Analog/Digital(PC) : environment depending on the contents of the image you are MagicBright™ button [] watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control buttons. 1) Custom
ملخص المحتوى في الصفحة رقم 12
the PIP screen in Analog and Digital (PC) mode. Power button [ ] / Use this button for turn the monitor on and off. Power indicator This will enable you to see the overall power status of the system. For more information, see the PowerSaver section. Headphone sound output terminal Speaker You can hear sound by connecting the soundcard of your PC to the monitor. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn yo
ملخص المحتوى في الصفحة رقم 13
2. DVI/PC IN 1. DVI(HDCP) : Connect the DVI cable to the DVI(HDCP) port on the back of your monitor. 2. RGB : Connect the signal cable to the RGB port on the back of your monitor. 3. AUDIO : PC sound terminal (input) 3. COMPONENT IN 1. R - AUDIO - L : DVD/DTV sound input terminal (left/right) 2. R B P , P ,Y : DVD/DTV video input terminal(PR, PB,Y) 4. S-VIDEO / VIDEO / R - AUDIO - L 1. S-VIDEO : External device (S-video) input terminal 2. VIDEO : External device (video) input terminal
ملخص المحتوى في الصفحة رقم 14
See Connecting the Monitor for further information regarding cable connections.
ملخص المحتوى في الصفحة رقم 15
Connecting the Monitor Connect the power cord for your monitor to the on the back of the monitor. 1. POWER Plug the power cord for the monitor into a nearby outlet. Using the D-sub (Analog) connector on the video card. 2-1. Connect the signal cable to the 15-pin, port on the back of your monitor. RGB [RGB] Using the DVI (Digital) connector on the video card. 2-2. Connect the DVI cable to the port on the back of your monitor. DVI(HDCP) [DVI(HDCP)] 2-3. Connected to a Macintos
ملخص المحتوى في الصفحة رقم 16
or a camcorder without disconnecting the PC. The configuration at the back of the monitor may vary from product to product. 1. Connecting AV Devices The monitor has AV connection terminals to connect AV input devices like DVD, VCR or Camcorder. You may enjoy AV signals as long as the monitor is turned on. 1. Input devices such as DVD, VCR or Camcorder are connected to the RCA or S-VIDEO terminal of the monitor using the RCA or S-Video cable. 2. Connect the port of the DVD, VCR
ملخص المحتوى في الصفحة رقم 17
1. Connect the Audio OUT port of the DVD or VCR (DVD / DTV set top box) and the R- AUDIO-L port of the monitor with the AV(RCA) cable. 2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the PR, PB, Y input ports using a component video cable (PR, PB, Y). 3. Select Component using the button. SOURCE 4. Since this product is a monitor whose resolution is different from a TV, the DTV signal is displayed at 480p VESA standard resolution. 3. Connecting Headphone You may co
ملخص المحتوى في الصفحة رقم 18
( ), By adopting a stand that can be rotated clockwise by 90 degrees, users can view the LCD screen in the Landscape or Portrait position according to taste. To rotate the LCD panel to the Portrait position, first lift it up to its maximum height, tilt it backwards and then rotate it clockwise. Rotating the LCD panel without tilting it backwards may damage the LCD panel. Using ( ), You can adjust the height of the monitor. If you rotate the screen without lifting it to its maximu
ملخص المحتوى في الصفحة رقم 19
Using ( ), You can adjust the tilt anlgle within a range of 5° forward to 15° backward for the most comfortable viewing angle. Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws ( ) and then remove the Stand from the LCD monitor. Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pa
ملخص المحتوى في الصفحة رقم 20
A. Monitor B. Mounting interface pad (sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. To mount the monitor on
