ملخص المحتوى في الصفحة رقم 1
SAFETY SYMBOLS
PRECAUTIONS
1. Introduction
1-1. Features
1-2. Package Contents
1-3. Controls &
Connectors
2. CABLE CONNECTION
2-1. Before Connecting
2-2. Connecting the
Signal Cable
2-3. Connecting Two PCs
to the Monitor
This manual is checked under the browser settings
3. ScreenManager
shown below. Text size can change for another one
through browser setting.
3-1. How to use the
ScreenManager
Microsoft Internet Exproler:
3-2. ScreenManager
Text size: Medium
Encoding: Western Europe
ملخص المحتوى في الصفحة رقم 2
9. TROUBLESHOOTING 10. CLEANING 11. SPECIFICATIONS 12. GLOSSARY APPENDIX/ANHANG/ANNEXE About TCO'03 (Applicable gray) About TCO'99 (Applicable black) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
ملخص المحتوى في الصفحة رقم 3
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2004-2005 EIZO NANAO CORPORATION All rights res
ملخص المحتوى في الصفحة رقم 4
1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features ● Dual inputs compliant (DVI-I x 2) ● DVI Digital input (TMDS) compliant ● [Horizontal scanning frequency] Analog: 24 - 100 kHz Digital: 31 - 100 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1600 dots x 1200 lines ● Smoothing function incorporated for the adjustment of an enlarged image ● FineContras
ملخص المحتوى في الصفحة رقم 5
to the readme.txt in the EIZO LCD Utility Disk for the details. 1-3. Controls & Connectors Front (1) ScreenManager ® (2) Main Power Switch (3) Input Signal Selection Button (4) Auto Adjustment Button (5) Enter Button (6) Control Buttons* 1 (Left, Down, Up, Right)* 2 (7) Power Button (8) Power Indicator* 3 Blue Operation Yellow Power saving Flashing yellow slowly Power is off (Main power is on)
ملخص المحتوى في الصفحة رقم 6
Off Power off *1 Directly pressing the control button without using the ActiveShot function allows you to select a FineContrast mode. The ScreenManager Main Menu and the FineContrast Menu cannot be displayed at the same time. *2 These buttons are changed to Up, Left, Right, Down when using the monitor with portrait mode. *3 Blue lighting, when the screen is displayed (Operation mode), is made to non-light, See Power Indicator.. Regarding the power indicator for the "Off Timer". Rear (9) Hei
ملخص المحتوى في الصفحة رقم 7
clockwise direction 90° (See ActiveRotationII Function.)). The LCD monitor can be used with an optional arm stand by removing the stand (See ATTACHING AN ARM.). *5 Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system. For further information, please consult: Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348 Fax: 650-572-9675 http://www.kensington.com
ملخص المحتوى في الصفحة رقم 8
2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) in accordance with the APPENDIX charts. ● When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. 2-2. Connecting the Signal Cable ● Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug
ملخص المحتوى في الصفحة رقم 9
Digital Input Signal Cable Connector of the PC PC Video Output Signal Cable ● Digital Graphics board Connector / DVI (FD-C39 enclosed) ● Power Mac G4/G5 (DVI) Input Connector (monitor) / DVI ● The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector). 2. Plug the power cord into the power connector on the rear of the monitor. 3. Lead the power cord and signal cable into the cable holder at rear of the monitor. ● When housing the cables in
ملخص المحتوى في الصفحة رقم 10
Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. 5. Turn on the monitor's Power button and then turn on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the " 9. TROUBLESHOO
ملخص المحتوى في الصفحة رقم 11
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor. Connecting Examples PC 1 PC 2 Signal Cable Signal Cable D-Sub (FD-C16 enclosed) (FD-C39 enclosed) (Ex.1) Analog mini 15 DVI Analog pin Signal Cable Signal Cable D-Sub D-Sub (FD-C16 enclosed) (FD-C16 optional) (Ex.2) Analog mini 15 mini Analog pin 15 pin Signal Cable Signal Cable (FD-C39 enclosed) (FD-C39 optional) (Ex.2) Digital DVI DVI Digital Selecting the Active Input Th
ملخص المحتوى في الصفحة رقم 12
selected input, the monitor will switch the input to that signal. In the case of only one signal being present at either input, the monitor automatically detects and displays that signal. Priority setting Performance If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases. 1 ● When the power of the monitor is turned ON. (SIGNAL 1) ● When the signal input to Signal 1 is changed even if active input was Signal 2. If signals from both inp
ملخص المحتوى في الصفحة رقم 13
3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ● Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Press the Enter button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings 1. Select the desired sub menu icon using the Control buttons and press the Enter button. The sub menu appears
ملخص المحتوى في الصفحة رقم 14
3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menu Sub menu Reference Clock * Phase * Position * 4-1. Screen Adjustment Screen Resolution * Range Adjustment * Smoothing Signal Filter * Brightness Temperature Gamma Saturation Color 4-3. Color Adjustment (Custom)* 1 Hue Gain 6 Colors Reset Standard Picture in Picture
ملخص المحتوى في الصفحة رقم 15
Translucent Set the transparency of the background. 6. ActiveRotationII Function. ActiveRotationII Make non-light for blue lighting when Power Indicator the screen is displayed. Return to the factory default settings. Reset Review the ScreenManager's settings, model name, serial number and usage Information Information time.* 2 English, German, French, Spanish, Italian, Language Select the ScreenManager's language. Swedish and Japanese *1 The adjustable functions on the menu de
ملخص المحتوى في الصفحة رقم 16
Movie Animated images Picture Photo or picture image Text Text on word processor or spreadsheet software Color reproduction by setting the values of color coordinate and gamma with using the "ScreenManager External Pro for LCD (for Windows)" (Refer to the EIZO LCD Utility Disk.) sRGB To display the screen images based on those original colors (ex. over the Internet) Color Adjustment of the Mode Settings , , and settings can be adjusted on the FineCont
ملخص المحتوى في الصفحة رقم 17
[Procedure] 1. Select in the ScreenManager menu. 2. Select "Enable" and press the Right and Left buttons to adjust the "On Period" (1 to 23 hours). [Off Timer System] PC Monitor Power Indicator On Period (1H - 23H) Operation Blue Advance Notice* Last 15 min. in "On period" Blue Flashing 1 "On period" expired Power Off Flashing yellow slowly *1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor automatically enters the "Power Off
ملخص المحتوى في الصفحة رقم 18
4. ADJUSTMENT 4-1. Screen Adjustment ● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function
ملخص المحتوى في الصفحة رقم 19
3. Adjust by using menu in the ScreenManager. (1) Vertical bars appear on the screen → Use the adjustment. Select the and eliminate the vertical bars by using the Right and Left of the Control buttons. Do not continuously press the Control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to adjustment as follows. (2) Horizon
ملخص المحتوى في الصفحة رقم 20
(4) Screen image is smaller or larger than the actual screen images. → Use the adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select and confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the up and down button and adjust the horizontal resolution using the right and left buttons. 4. Adjust the output signa
