ملخص المحتوى في الصفحة رقم 1
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------
1
SAFETY PRECAUTIONS ------------------------------------ 2
SPECIAL NOTES ON LCD MONITORS ------------------
3
BEFORE YOU OPERATE THE MONITOR --------------------
3
FEATURES -------------------------------------------------------
3
PACKING LIST --------------------------------------------------
3
INSTALLATION INSTRUCTIONS --------------------------
4
CONTROLS AND CONNECTORS ---------------------
ملخص المحتوى في الصفحة رقم 2
Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate
ملخص المحتوى في الصفحة رقم 3
PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable trolley, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a trolley or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the
ملخص المحتوى في الصفحة رقم 4
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01%
ملخص المحتوى في الصفحة رقم 5
POWERCORD Power Source: 1. Make sure the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord into your LCD monitor’s External Adapter input socket, and then plug the other end of External adapter to LCD monitor’s DC-power-input. The AC-power cord may be connected to either a wall power outl
ملخص المحتوى في الصفحة رقم 6
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. 1. Connect the power adapter dc cable to the DC-In port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. Only 3. ( Dual-Input Model) Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port. 4. Connect the au
ملخص المحتوى في الصفحة رقم 7
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then to adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You may adjust the monitor’s angle from -5 ° to 20 °. Figure 2 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Careful attention is required not to catch your
ملخص المحتوى في الصفحة رقم 8
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power switch to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power switch to turn on the monitor. The power indicator LED will light up.
ملخص المحتوى في الصفحة رقم 9
FRONT PANEL CONTROL • /Power Key: Press this knob to switch ON/OFF of monitor’s power. • /MENU/ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status. • /Volume: Activates the volume control when the OSD is OFF or n
ملخص المحتوى في الصفحة رقم 10
HOW TO ADJUST A SETTING 1. Press the MENU key to make the OSD window appear. 2. Press < or > to select the desired function. 3. Press the MENU key to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the exit functions,. If you want to adjust any other function, repeat steps 2-4. I. Analog-Only Mode II. Dual-Input Model, Analog Signal Input 41
ملخص المحتوى في الصفحة رقم 11
III. Dual-Input Model, Digital Signal Input ADJUSTING THE PICTURE The description for function control icons Main Sub Menu Sub Menu Menu Description Icon Item Icon Adjusts the contrast between the Contrast foreground and background of the screen image. Adjusts the background brightness of the Brightness screen image. Adjust picture Focus (available in Analog Focus mode only). Adjust picture Clock (available in Analog Clock mode only).
ملخص المحتوى في الصفحة رقم 12
N/A English N/A 繁體中文 N/A Deutsch N/A Français Multi-Language selection N/A Español N/A Italiano N/A 简体中文 N/A 日本語 H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD- Adjust the OSD timeout. Timeout Auto Adjust the H/V Position, Focus and (Analog N/A Auto Config Clock of picture. -Only Model) N/A Analog Select input signal from analog (D-Sub). (Dual- N/A Digital Select input signal from d
ملخص المحتوى في الصفحة رقم 13
PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. This allows the monitor to inform the host system of its identity and, depending on the level of DDC used, to communicate additional information about its display capabilities. The communication channel is divided in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID in
ملخص المحتوى في الصفحة رقم 14
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check that the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check that the PC system is Plug & Play compatible *Check that the Video Card is Plug & Play compatible *Check that the D-15 plug pin of Video Cable is not bent. Picture is fuzzy *Adjust the Contrast and Brightness Controls. Picture bounces or a wave *Move electrical devices that may cause pattern is
ملخص المحتوى في الصفحة رقم 15
Screen image is not centered or *Adjust pixel frequency (CLOCK) and sized properly. FOCUS or press hot-key (AUTO). Picture has color defects *Adjust RGB color or select color (white does not look white) temperature Horizontal or vertical disturbances on *Use win 95/98 shut-down mode Adjust the screen CLOCK and FOCUS or perform hot- key (AUTO-key). CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not right, the screen will sho
ملخص المحتوى في الصفحة رقم 16
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORTS: Your computer has been set to unsuitable display mode, set the computer to Display mode given in the following table(See page 18). 41L1500-786-1A 英文 15
ملخص المحتوى في الصفحة رقم 17
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 38.1cm(15") Pixel pitch 0.297mm( H ) × 0.297mm( V ) Viewable angle 120 ° (H) 110 ° (V) 2 Brightness 250 cd/m (typ.) Contrast Ratio 400:1(typ.) Response time (Tr+Tf) 25 (8+17) ms (typ.) Video R,G,B Analog Interface (Only Dual-Input Digital Interface Model) Input H-Frequency 30kHz – 60kHz V-Frequency 55-75Hz Display Colors 16.2 million Colors Dot Clock 80MHz Max. Resolution 1024 × 768@75 Hz
ملخص المحتوى في الصفحة رقم 18
Switch • Power Switch • MENU/ ENTER • >/Volume •
ملخص المحتوى في الصفحة رقم 19
Preset Display Modes HORIZONTAL VERTICAL VIDEO MODE RESOLUTION FREQUENCY (kHz) FREQUENCY (Hz) 640 × 480 31.469 59.940 VGA 640 × 480 37.500 75.000 640 × 480 37.861 72.809 800 × 600 35.156 56.250 VESA SVGA 800 × 600 37.879 60.317 800 × 600 46.875 75.000 1024 × 768 48.363 60.004 XGA 1024 × 768 56.476 70.069 1024 × 768 60.023 75.029 IBM DOS 720 × 400 31.469 70.087 1024 × 768 48.780 60.001 MAC XGA 1024 × 768 60.241 74.927 41L1500-786
ملخص المحتوى في الصفحة رقم 20
CONNECTOR PIN ASSIGNMENT 15 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Logic Ground 3. Blue 11. Monitor Ground 4. Monitor Ground 12. DDC-Serial Data 5. DDC-Return 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground (Dual-Input Model) 24 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PI N NO. DESCRIPTION 1. TMDS Da
