ملخص المحتوى في الصفحة رقم 1
electronic user's manual
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107F/manual.html7/15/2004 5:32:10 PM
ملخص المحتوى في الصفحة رقم 2
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: ● Disconnect the mo
ملخص المحتوى في الصفحة رقم 3
About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version. The sections are as follows: ● Safety and Troubleshooting Information provides tips and sol
ملخص المحتوى في الصفحة رقم 4
About This Electronic User's Manual ● Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product. RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings,
ملخص المحتوى في الصفحة رقم 5
About This Electronic User's Manual ©2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107F/ABOUT/ABOUT.HTM (3 of 3)7/15/2004 5:32:41 PM
ملخص المحتوى في الصفحة رقم 6
107F Product Information Product Information Product Features • LightFrame™ for Windows • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features Model Regulation Color 107F51 MPRII Gray 107F56 MPRII Blue/Silver 107F5 ● 17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with MACs and PCs ● Autoscan covers horizontal frequencies up to 71 kHz offering a maximum resolution of 1280 x
ملخص المحتوى في الصفحة رقم 7
107F Product Information Introduction Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT (picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and videos on the monitor screen. To control the LightFrame™ feature in your monitor, you have to install the LightFrame™ application which you will find on this CD-ROM. Note Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier
ملخص المحتوى في الصفحة رقم 8
107F Product Information 3) Now, follow the on-screen prompts to properly install the program. The software checks to see if you have a compatible monitor. You must agree to the license agreement terms for the software to install. 4) After installation, LightFrame™ automatically loads and the icon appears in the taskbar. Notes If LightFrame™ detects that your monitor is not LightFrame™ compatible, a message appears on the monitor screen. If you see this message, you can select to ab
ملخص المحتوى في الصفحة رقم 9
107F Product Information A: No. If you run LightFrame™ 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing will happen. Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor. A:No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is however possible to use the LightFrame™ 2 software on a LightFrame™ 1 monitor. Q:What is the difference between LightFrame™ 1, LightFrame™ 2 and LightFrame™ 3? A:LightFrame™ 1 was the very first genera
ملخص المحتوى في الصفحة رقم 10
107F Product Information which is capable of running the LightFrame™ 3 feature. Q:How can I tell which version LightFrame™ my monitor can support? A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo which you will find on the top, right-hand corner of the monitor. If this logo has a small 3 in it, your monitor is ready for LightFrame™ 3. Otherwise you should use the LightFrame™ 1 or 2 software. Q: How many windows can I enhance at the same time?
ملخص المحتوى في الصفحة رقم 11
107F Product Information cross indicates that you move into an area where you cannot make a selection. Q:Can I use LightFrame™ with Netscape? A: You can use LightFrame™ with Netscape, but its functions are limited to manually highlighting the entire Netscape client window. Since LightFrame™ is specifically designed for bright, high contrast photo and video display, highlighting an entire Web page -- including text -- is not recommended. For best results, we recommend you use LightFrame™ with
ملخص المحتوى في الصفحة رقم 12
107F Product Information RETURN TO TOP OF THE PAGE Technical Specifications* CRT • Size and deflection 17 inch / 41 cm ; 90° deflection angle • Dot pitch 0.25 mm • Horizontal pitch 0.21 mm Shadow mask, Real Flat, high contrast, anti-glare, anti- • Tube type static, anti reflection • Phosphor P22 • Recommended display area 12.0" x 9.0" / 306 x 230 mm • Maximum display area 12.8" x 9.6" / 325 x 244 mm SCANNING file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107F/PRODUCT/PRODUCT.HTM (7 of 12)7/15/
ملخص المحتوى في الصفحة رقم 13
107F Product Information • Horizontal scanning 30 - 71 KHz • Vertical scanning 50 - 160 Hz VIDEO • Video dot rate 120 MHz • Input impedance - Video 75 ohm - Sync 4.7 kOhm • Input signal levels 0.7 Vpp • Sync input signal Separate sync • Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 degrees K x = 0.283 / y = 0.297 • at 6500 degrees K x = 0.313 / y = 0.329 • at sRGB x = 0.313 / y = 0.329 sRGB sRGB is a standard for ensuring correc
ملخص المحتوى في الصفحة رقم 14
107F Product Information Exit this OSD. After this, please don't change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K. For more information on sRGB, please visit: www.srgb.com * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor
ملخص المحتوى في الصفحة رقم 15
107F Product Information RETURN TO TOP OF THE PAGE Physical Specifications 15.6" x 15.1" x 16.7" / 397 x 383x 424 mm (including base) 15.6" x 13.1" x 16.7" /397 x 333 x 424 mm (excluding base) • Dimensions • Weight 15.5 kg 100-240 VAC, 60-50Hz • Power supply (Please refer to rating label) • Temperature (operating) 0° to 40°C / 32° to 104°F • Temperature (storage) -25° to +65°C / -13° to +149°F • Relative humidity(storage) 5% to 95% * Resolution 1280 x 1024, standard size, contrast max.,
ملخص المحتوى في الصفحة رقم 16
107F Product Information Pin Pin Assignment Assignment No. No. 1 Red video input 9 +5V DDC supply 2 Green video input 10 Logic ground Identical output - 3 Blue video input 11 connected to pin 10 Identical output - 4 12 Serial data line (SDA) connected to pin 10 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and it
ملخص المحتوى في الصفحة رقم 17
107F Product Information RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107F/PRODUCT/PRODUCT.HTM (12 of 12)7/15/2004 5:32:43 PM
ملخص المحتوى في الصفحة رقم 18
Installing your Monitor Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls for the CONTRAST will show up. Brightness hotkey. When the "+" button is pressed, the adjustment controls for BRIGHTNESS will show up. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (1 of 3)7/15
ملخص المحتوى في الصفحة رقم 19
Installing your Monitor "-" and "+" buttons, are used for adjusting the OSD of your monitor. LightFrame™ hotkey. When the button is pressed, the high- brightness function of LightFrame™ will show up. RETURN TO TOP OF THE PAGE Rear View file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (2 of 3)7/15/2004 5:32:44 PM
ملخص المحتوى في الصفحة رقم 20
Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (3 of 3)7/15/2004 5:32:44 PM
