ملخص المحتوى في الصفحة رقم 1
KBD960/KBR960
Desktop Intelligent
Keyboard/M
Installation/
Operation Manual
C1519M-C (8/05)
Pelco World Headquarters 3500 Pelco Way, Clovis, CA 93612-5699 USA www.pelco.com
USA & Canada: Tel: 800/289-9100 Fax: 800/289-9150
International: Tel: 1-559/292-1981 Fax: 1-559/348-1120
ملخص المحتوى في الصفحة رقم 2
CONTENTS Section Page REGULATORY NOTICES ..................................................................................6 IMPORTANT SAFEGUARDS AND WARNINGS ...............................................7 DESCRIPTION ..................................................................................................8 MODELS ....................................................................................................8 READING THIS MANUAL ...................................................
ملخص المحتوى في الصفحة رقم 3
ADVANCED OPERATION ................................................................................30 PRESETS ................................................................................................. 30 CREATING PRESETS ...................................................................... 30 RECALLING PRESETS .................................................................... 30 DELETING PRESETS ...................................................................... 30 PATTERNS ........
ملخص المحتوى في الصفحة رقم 4
LIST OF ILLUSTRATIONS Figure Page 1 KBD960/KBR960 ................................................................................. 9 2 Connecting to the CM6800 ................................................................ 11 3 Enter Setup PIN ................................................................................. 12 4 Setup Mode ....................................................................................... 12 5 Joystick Setup ..........................................
ملخص المحتوى في الصفحة رقم 5
LIST OF TABLES Table Page A Function Key Defaults .......................................................................... 15 B Main Menu 1 ........................................................................................ 17 C Main Menu 2 ........................................................................................ 17 D Monitor Menu ....................................................................................... 18 E Camera Menu 1 .................................
ملخص المحتوى في الصفحة رقم 6
REGULATORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee tha
ملخص المحتوى في الصفحة رقم 7
IMPORTANT SAFEGUARDS AND WARNINGS 1. Read, keep, and follow these instructions. 2. Heed all warnings. 3. There are no user-serviceable parts inside this unit. Only authorized service personnel may open the unit. 4. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 5. WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture if this unit is designed for indoor use only. 6. Unless this unit is spe
ملخص المحتوى في الصفحة رقم 8
DESCRIPTION The KBD960/KBR960 Keyboard includes Pelcos proprietary M protocol, allowing it to be used with all M devices, such as Pelcos latest matrix switch the CM6800. You can program the keyboard, and you can create and execute macros. You have access to effective monitoring procedures for any CCTV application. You can assign simple or complex functions to many of the keys. This allows you to configure the keyboard to suit a specific monitoring environment. Some of the keyboard features i
ملخص المحتوى في الصفحة رقم 9
KEYBOARD LAYOUT The KBD960 keyboard consists of the following: 1. LCD Display 2. Icon Keys 3. Keypad 4. Function Keys 5. Control Keys LCD DISPLAY 1 6. Lens Keys ICON KEYS 2 7. Joystick 8. Turbo Key 9. Escape Key JOYSTICK 7 9 ESCAPE KEY TURBO KEY 8 FUNCTION KEYS 4 (F1-F24) LENS KEYS 6 3 KEYPAD 5 CONTROL KEYS 00891 KBD960 KBR960 Figure 1. KBD960/KBR960 LCD DISPLAY The LCD is a four-line display. Each line displays different information. Line 1 Displays the video output (which is typically a monit
ملخص المحتوى في الصفحة رقم 10
CONTROL KEYS These keys are used for the following functions: Step backward through available camera selections. Step forward through available camera selections. Select and execute macros. Rcl: Recall previous selections. Alt: Reserved for future use. Prst: Recall preset. Lock: Reserved for future use. LENS KEYS You can use these keys to control cameras equipped with motorized zoom lenses and motorized pan and tilt units. These keys are sometimes used to acti- vate other functions. For example,
ملخص المحتوى في الصفحة رقم 11
INSTALLATION The following items are supplied: KBD960/KBR960 Keyboard CM9505UPS Universal Power Supply Two 25 ft (7.6 m) straight RJ-45 cables (one with ferrite) 10 blank labels and 10 punched LEXAN decal overlays CONNECTING TO THE CM6800 NOTE: Communication to the 1. Set all DIP switches OFF. The DIP switches are located on the bottom of the keyboards is RS-485. Pelco recom- keyboard. mends using four-conductor, shielded, 2. Connect the RJ-45 straight cable with ferrite from COM 1 of th
ملخص المحتوى في الصفحة رقم 12
SETUP MODE You can configure the KBD960 in the Setup Mode. You can do the following: Create a Personal Identification Number (PIN) for entering the Setup Mode. Create a PIN that provides access to features on the Define Menu. Calibrate the joystick. Adjust the display brightness. Set the data transmission speeds for the keyboards three COM ports. Define the function keys. Select a host port. The default setup PIN is 1234. You can change it in the Setup Mode. ACTIVATING SETUP MODE
ملخص المحتوى في الصفحة رقم 13
CREATING A SETUP PIN Advance Setup 2 Setup Pin! **** The factory settings for the KBD960 include the default setup PIN 1234. Confirm! **** Define Pin! **** Follow these steps to change the default PIN: Confirm! **** DEF NUM 1. Select ADV from Setup Mode. 00898 Figure 6. Advance Setup 2 2. Select and/or to locate Advance Setup 2. 3. Select and/or to choose Setup PIN. DEF DEF 4. Select , enter a four-digit PIN, and select once again. NUM NUM DEF 5. Advance the cursor to the confirm r
ملخص المحتوى في الصفحة رقم 14
ADJUSTING THE DISPLAY BRIGHTNESS LCD BRIGHTNESS SETUP LCD 1. Select from Setup Mode. 2. Select to make the display brighter or to make the display dimmer. 00899 Figure 7. LCD Brightness Setup 3. Select and then . LCD You can also adjust the display brightness by selecting from the Define Menu. Refer to the Operation section of this manual. CONFIGURING THE COM PORTS Advance Setup 1 COM1!!! None (Host) 1. Select ADV from Setup Mode and scroll to the Advance Setup 1 screen. COM2!!! None COM3!
ملخص المحتوى في الصفحة رقم 15
CONFIGURING THE FUNCTION KEYS NOT DEFINED KEY DEFINE 1. Select from Setup Mode to switch to the key define mode. NUMx ESC PLEASE ENTER A KEY BKSPACE ENTER 2. Press a function key you want to configure. If the key is already defined, its DEFINE assigned function is shown. If not, Def = NOT DEFINED appears on the DEF NUM LCD screen. 00901 Figure 9. Key Define Mode 3. Select and/or to scroll through the list of available functions. NOTE: Refer to Table A for the factory default settings. 4. S
ملخص المحتوى في الصفحة رقم 16
OPERATION This section describes the operation of a CM6800 System using the KBD960 keyboard. Before you begin operating the KBD960, make sure you have com- pleted the following: 1. Connections have been made and initial power-up has been completed. 2. CM6800 setup files have been programmed. 3. PINs have been set up to allow logging on, access to the setup functions, and access to the Define Menu. You must also have the following information: The logical camera number list, complete with ident
ملخص المحتوى في الصفحة رقم 17
ACCESSING THE KBD960 MENUS 1. Set DIP switch 2 OFF. 2. Enter the number of the monitor and then press . 3. Press and the Main Menu 1 icons appear. Table B. Main Menu 1 MAIN MENU 1 1 1 Select to bring up the Monitor Menu. If you enter a number before selecting this icon, the monitor number changes to that number. LOG MUX GPI PRST OFF Select to bring up the Camera Menu. If you enter a number be- 00904 fore selecting this icon, the camera number changes and the Figure 12. Main Menu 1 camera swit
ملخص المحتوى في الصفحة رقم 18
Table D. Monitor Menu MONITOR MENU 1 1 Select to request the previous logical monitor number in the sys- tem and to grant control of the monitor if it is available. The logi- cal monitor number range is 1-9999. 00906 Select to request the next logical monitor number in the system Figure 14. Monitor Menu and to grant control of the monitor if it is available. The logical monitor number range is 1-9999. This icon indicates whether or not you have control of the monitor. A highlighted icon means
ملخص المحتوى في الصفحة رقم 19
Table F. Camera Menu 2 CAMERA MENU 2 1 1 Select to send an AUX 3 set command to the selected camera. When you release the key, a clear command is sent. 3 5 3 4 6 7 8 Select to send an AUX 4 set command to the selected camera. 00908 4 When you release the key, a clear command is sent. Figure 16. Camera Menu 2 Select to send an AUX 5 set command to the selected camera. 5 When you release the key, a clear command is sent. Select to send an AUX 6 set command to the selected camera. 6 When you rele
ملخص المحتوى في الصفحة رقم 20
Table H. MUX Menu 2 MUX MENU 2 1 1 MUX Select to send a MUX PIP command to the selected multiplexer. Select to send a MUX 4-camera command to the selected 00910 multiplexer. Figure 18. MUX Menu 2 Select to send a MUX 9-camera command to the selected multiplexer. Select to send a MUX 16-camera command to the selected multi- plexer. Select to bring up MUX Menu 1. Select to return to Main Menu 1. Table I. Alarm Menu ALARM MENU 1 1 Select to request the previous triggered logical alarm number in
