ملخص المحتوى في الصفحة رقم 1
P8H61-M PLUS V3
Motherboard
ملخص المحتوى في الصفحة رقم 2
E7350 Third Edition (V3) May 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if
ملخص المحتوى في الصفحة رقم 3
Contents Safety information ...................................................................................... vi About this guide ........................................................................................ vii P8H61-M PLUS V3 specifications summary ............................................. ix Chapter 1 Product introduction 1.1 Before you proceed ..................................................................... 1-1 1.2 Motherboard overview ..............................
ملخص المحتوى في الصفحة رقم 4
Contents Chapter 2 BIOS information 2.1 Managing and updating your BIOS ............................................ 2-1 2.1.1 ASUS Update utility ........................................................ 2-1 2.1.2 ASUS EZ Flash 2 ............................................................ 2-2 2.1.3 ASUS CrashFree BIOS 3 utility ...................................... 2-3 2.1.4 ASUS BIOS Updater ....................................................... 2-4 2.2 BIOS setup program ...................
ملخص المحتوى في الصفحة رقم 5
Contents 2.7.1 Bootup NumLock State [On] ......................................... 2-24 2.7.2 Full Screen Logo [Enabled] ........................................... 2-24 2.7.3 Wait for ‘F1’ If Error [Enabled] ....................................... 2-24 2.7.4 Option ROM Messages [Force BIOS] ........................... 2-25 2.7.5 Setup Mode [EZ Mode] ................................................. 2-25 2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy] .... 2-25 2.7.7 PCI ROM Priority [Lega
ملخص المحتوى في الصفحة رقم 6
Safety information Electrical safety • To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cabl
ملخص المحتوى في الصفحة رقم 7
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: BIOS information This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Where to fin
ملخص المحتوى في الصفحة رقم 8
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Typography Bold text Ind
ملخص المحتوى في الصفحة رقم 9
P8H61-M PLUS V3 specifications summary ® ® CPU LGA1155 socket for Intel 3rd/2nd Core™ i7 / i5 / i3 / Pentium / ® Celeron processors Supports 22nm / 32nm CPU ® Supports Enhanced Intel SpeedStep Technology (EIST) ® * Refer to www.asus.com for Intel CPU support list. ® Chipset Intel H61 Express Chipset Memory 2 x DIMM, max. 16GB**, DDR3 2200(O.C.) /2133(O.C.) /2000(O. C.) /1866(O.C.) /1800(O.C.) /1600 /1333 /1066 MHz, non-ECC, un-buffered memory Dual-channel memory architecture ® Supports Int
ملخص المحتوى في الصفحة رقم 10
P8H61-M PLUS V3 specifications summary Rear panel ports 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x LPT port 1 x COM port 1 x LAN (RJ-45) port 4 x USB 2.0/1.1 ports 3 x Audio jacks Internal connectors/ 2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1 switches/ buttons ports 4 x SATA 3.0 Gb/s connectors 1 x CPU fan connector 1 x Chassis fan connector 1 x Front panel audio connector 1 x Chassis intrusion connector 1 x speaker header 1 x S/PDIF Out conne
ملخص المحتوى في الصفحة رقم 11
Chapter 1 Product introduction ® Thank you for buying an ASUS P8H61-M PLUS V3 motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in your motherboard package. Refer to page x for the list of accessories. If any of the items is damaged or missing, contact your retailer. 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wal
ملخص المحتوى في الصفحة رقم 12
1.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Ensure that you unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 1.2.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of
ملخص المحتوى في الصفحة رقم 13
LGA1155 CLRTC CHASSIS SPEAKER 1.2.3 Motherboard layout 1 2 3 1 4 19.8cm(7.8in) KBMS CPU_FAN EPU ATX12V 2 USB34 LAN1_USB12 AUDIO Lithium Cell CMOS Power CHA_FAN RTL 8111E PCIEX16 P8H61-M PLUS V3 Super PCIEX1_1 64Mb ASM BIOS I/O 1083 ® Intel H61 PCI1 SB_PWR PCI2 SATA3G_3 SATA3G_1 ALC 887-VD 5 SPDIF_OUT F_PANEL USB56 USB78 SATA3G_4 SATA3G_2 AAFP 13 12 11 10 9 8 7 6 1.2.4 Layout contents Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page 1. CPU and chassis fan connectors 1-19 8. Cl
ملخص المحتوى في الصفحة رقم 14
1.3 Central Processing Unit (CPU) ® The motherboard comes with a surface mount LGA1155 socket designed for the Intel ® ® Second Generation Core™ i7 / i5 / i3 / Pentium / Celeron processors. Unplug all power cables before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
ملخص المحتوى في الصفحة رقم 15
3. Lift the load lever in the direction of the arrow until the load plate is completely lifted. Load plate 4. Remove the PnP cap from the CPU socket by lifting the tab only. PnP cap 5. Position the CPU over the socket, ensuring that the gold triangle is on the bottom-left corner of the socket, and CPU notches then fit the socket alignment keys into the CPU notches. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending Gold the connector
ملخص المحتوى في الصفحة رقم 16
6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some heatsinks come with pre- applied thermal paste. If so, skip this step. The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately, and seek professional medical help. 7. Close the load plate (A), and then push B down the load lever (B), en
ملخص المحتوى في الصفحة رقم 17
1.3.2 Installing the CPU heatsink and fan ® The Intel LGA1155 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. ® • When you buy a boxed Intel processor, the package includes the CPU fan and ® heatsink assembly. If you buy a CPU separately, ensure that you use only Intel -certified multi-directional heatsink and fan. ® • Your Intel LGA1155 heatsink and fan assembly comes in a push-pin design and requires no tool to install.
ملخص المحتوى في الصفحة رقم 18
3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. CPU_FAN P8H61-M PLUS V3 P8H61-M PLUS V3 CPU fan connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 1.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a d
ملخص المحتوى في الصفحة رقم 19
4. Carefully remove the heatsink and fan assembly from the motherboard. 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. 1.4 System memory 1.4.1 Overview The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power cons
ملخص المحتوى في الصفحة رقم 20
1.4.2 Memory configurations You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • According to Intel CPU specification, DIMM voltage below 1.65V is recommended to protect the CPU. • Always install DIM
