Renesas R0E436640CFK20 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

R0E436640CFK20
Converter Board for 64-pin 0.5mm pitch LQFP
User’s Manual
* IC149-064-075-B51 is a trademark of Yamaichi Electronics Co., Ltd.

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remembe

ملخص المحتوى في الصفحة رقم 2

1. Outline The R0E436640CFK20 is a converter board for connecting the compact emulator R0E436640CPE00 for H8/300H Tiny Series to a foot pattern for 64-pin 0.5mm pitch LQFP (PLQP0064KC-A) of H8/3664 Group. R0E436640CFK20 2. Package Components (See Figure 1) Table 1 Package Components Item Quantity (1) R0E436640CFK20 (Base board R0E436640CIF00 and 150mm 1 pc. FFC cable included) (2) IC149-064-075-B51 Screws (M2×12mm) 1 pkg. IC socket (made by Yamaichi Electronics Co.

ملخص المحتوى في الصفحة رقم 3

5. Connection Procedure (See Figure 3) The procedure for connecting the R0E436640CFK20 is shown below. R0E436640CPE00 (1) Mount the IC socket on the user system. Screws (M2×12mm) * (2) Connect the R0E436640CPE00 and R0E436640CIF00. R0E436640CFK20 (3) Connect the R0E436640CFK20 and IC socket. (2) (4) Flat washers * Fasten the IC socket to the socket cover with the four R0E436640CIF00 screws (M2 x 12 mm) provided. Each screw should be tightened a little at a time, alternatin

ملخص المحتوى في الصفحة رقم 4

7. Precautions CAUTION Cautions to Be Taken for This Product: Do not connect anything to the NC pins. Do not pull or excessively flex the cable. The cable may cause a break. When connecting the emulator and IC socket, be sure to use the included screws (M2 x 12mm). When connecting the IC socket and socket cover, be sure to use the included screws (M2 x 6mm). When connecting the IC socket and socket cover, use a Phillips-type screwdriver whose head matches the screw head. If