Renesas R0E436640CFG20 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

R0E436640CFG20
Converter Board for 64-pin 0.8mm pitch QFP
User’s Manual
* IC149-064-008-B5 is a trademark of Yamaichi Electronics Co., Ltd.

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember

ملخص المحتوى في الصفحة رقم 2

1. Outline The R0E436640CFG20 is a converter board for connecting the compact emulator R0E436640CPE00 for H8/300H Tiny Series to a foot pattern for 64-pin 0.8mm pitch QFP (PRQP0064GB-A) of H8/3664 Group. 2. Package Components (See Figure 1) R0E436640CFG20 Table 1 Package Components Item Quantity (1) R0E436640CFG20 (Base board R0E436640CIF00 and 150mm 1 pc. FFC cable included) (2) IC149-064-008-B5 1 pkg. (made by Yamaichi Electronics Co., Ltd) Screws (M2 x 12mm)

ملخص المحتوى في الصفحة رقم 3

5. Connection Procedure (See Figure 3) The procedure for connecting the R0E436640CFG20 is shown below. (1) Mount the IC socket on the user system. (2) Connect the R0E436640CPE00 and R0E436640CIF00. R0E436640CPE00 Screws (M2×12mm) * (3) Connect the R0E436640CFG20 and IC socket. Fasten the IC socket to the socket cover with the four R0E436640CFG20 (4) (2) Flat washers * screws (M2 x 12 mm) provided. Each screw should be tightened a little at a time, alternating between screws

ملخص المحتوى في الصفحة رقم 4

7. Precautions CAUTION Cautions to Be Taken for This Product: Do not connect anything to the NC pins. Do not pull or excessively flex the cable. The cable may cause a break. When connecting the emulator and IC socket, be sure to use the included screws (M2 x 12mm). When connecting the IC socket and socket cover, be sure to use the included screws (M2 x 8mm). When connecting the IC socket and socket cover, use a Phillips-type screwdriver whose head matches the screw head. If