Renesas PCA7757 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PCA7757
Converter Board from 64-pin FLGA (64F0G) to 32-pin DIL Standard-Pitch (with FLGA Socket and Pattern for Oscillator)
User’s Manual

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to

ملخص المحتوى في الصفحة رقم 2

1. Outline The PCA7757 is a converter board from 64-pin FLGA (64F0G) to standard-pitch (2.54-mm). The pins correspond one-to-one. 2. Connecting the Oscillator Circuit Pattern Take notice that the processing depends on whether or not the IC1 (oscillator module) is used. (1) When the IC1 (oscillator module) is used Recommended oscillator module: SG-51P (Seiko Epson Corporation) When using the IC1, the following processing is necessary (see (1) to (3) in Figure 1). (1) Supply VCC

ملخص المحتوى في الصفحة رقم 3

(2) When using 2-pin type oscillator When using a 2-pin type oscillator, follow the procedure below (see (1) to (8) in Figure 3). For the capacitor capacity and the resistance value, contact the capacitor distributor. (1) Install an oscillator at the XTAL1. (2) Install a capacitor at the C2. (3) Install a capacitor at the C3b. (4) Install a resistor at the Rd. (5) Install a resistor at the Rf. (6) Connect the XIN pin. (7) Connect the XOUT pin. (8) Connect the GND of the oscillator.

ملخص المحتوى في الصفحة رقم 4

3. External Dimensions 63.34 55.80 5.00 J1 RENESAS PCA7757 REV.A 1 64 17 48 IC1 1A 16 49 32 33 VCC GND MADE IN JAPAN Unit: mm Figure 5 External dimensions of the PCA7757 4. Precautions IMPORTANT Notes on This Product: We cannot accept any request for repair. For inquiries about this product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/en/tools (4/4) 4.52 42.62 70.00