Renesas M3T-DUMMY100S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

M3T-DUMMY100S
Dummy IC for 100-pin 0.65-mm-pitch QFP
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with app

ملخص المحتوى في الصفحة رقم 2

1. Outline The M3T-DUMMY100S is an accessory tool product which (1) M3T-DUMMY100S main unit connects the probe of an emulation pod and a target system. Its dimensions are the same as those of 100-pin 0.65-mm- pitch QFP (20 x 14 mm) IC packages (100P6S-A). 2. Package Components (see Figure 1) (2) Socket main unit (3) Socket frame (1) M3T-DUMMY100S main unit (2) Socket main unit (3) Socket frame for 100P6S-A (2 pieces) (4) M3T-DUMMY100S User's Manual (This manual) For 100P6S-A, For 100P6S-A 100P6P

ملخص المحتوى في الصفحة رقم 3

6. External Dimensions of the M3T-DUMMY100S Symbol Dimension [mm] A 5.0 b 0.4 D 14.0 E 20.0 e 0.65 HD 16.8 22.8 HE M 6.3 Upper connector J1: AXN650545P (made by Matsushita Electric Works, Ltd.) Upper connector J2: AXN550045P (made by Matsushita Electric Works, Ltd.) Board Material: Glass epoxy board Pin Material: Bronze phosphide Plating: Solder plating 1 : Pin number of the M3T-DUMMY100S Upper connectors Material: Heat tolerant resin (body) 1 : Pin number of the upper connectors (J1, J2) Copper

ملخص المحتوى في الصفحة رقم 4

8. Precautions CAUTION Cautions to Be Taken for This Product: •When you use the M3T-DUMMY100S, be sure to use it with the socket frame for 100P6S-A. •Do not solder the M3T-DUMMY100S main unit directly on a target board. Be sure to use the included socket. • Before mounting the M3T-DUMMY100S, be sure to check the pin positions. • Holder patterns are required at each of the four corners of the target foot pattern (see Figure 4). • Be sure to solder the holders of the socket. An insufficient amount