Renesas M38C29T-64LCA دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

M38C29T-64LCA
Converter Board for Connecting 100-pin RFS Type Emulator MCU to 64-pin 0.8-mm-pitch QFP/LQFP
(for 38000 Series 38C1, 38C2, 38K0 and 38K2 Groups)
User's Manual



If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.


Renesas Tools Homepage http://www.renesas.com/tools
Rev.2.00
Feb. 20, 2008
REJ10J0068-0200
(1/4)

ملخص المحتوى في الصفحة رقم 2

1. Outline The M38C29T-64LCA is a converter board which connects the GND test pin 100-pin RFS type emulator MCU (M38C13RLFS, RESET test pin M38C29RLFS, M38K09RFS, M38K29RFS) to a foot pattern for 64-pin 0.8-mm-pitch QFP (PRQP0064GA-A) and 64-pin M38C29T-64LCA board 0.8-mm-pitch LQFP (PLQP0064GA-A). 2. Package Components (1) M38C29T-64LCA x1 (2) M38C29T-64LCA User's Manual (This manual) x1 100-pin LCC socket * When using the M38C29T-64LCA, the following IC socket 64-pi

ملخص المحتوى في الصفحة رقم 3

RELEASE 4.2 Connecting to User System Connect the M38C29T-64LCA to the user system as follows. 64 64 Polarizing pin (1) Set the head of the screw for releasing the LCC socket at 1 1 LOCK "LOCK" on the board as shown in Figure 4. Turn the screw until it clicks. LOCK (2) Mount the 64-pin header of the M38C29T-64LCA to the LOCK 64-pin LCC socket 64-pin LCC socket aligning the polarizing pin. M38C29T- 64LCA (3) The 64-pin header and 64-pin LCC socket are rated at 50 mate

ملخص المحتوى في الصفحة رقم 4

6. Precautions CAUTION Cautions to Be Taken for This Product: Before mounting the M38C29T-64LCA, be sure to check the pin positions. IMPORTANT Notes on This Product: We cannot accept any request for repair. For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 7. Correspondence of the Connectors Table 2 Correspondence of connectors J1 and J2 J1 connector J2 connector J