Nortel Networks 5580 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

112770-A QI F/M Cards Page 1 Tuesday, December 17, 1996 6:43 AM

Quick Installation
for Flash Memory
Cards
Part No. 112770-A
May 1996

ملخص المحتوى في الصفحة رقم 2

112770-A QI F/M Cards Page 2 Tuesday, December 17, 1996 6:43 AM Introduction ™ The System 5000 routers use flash memory cards to provide storage for the nonvolatile file system (NVFS). The router installation and configuration files are stored on flash memory cards. You must remove the Model 5380 Ethernet Router and the Model 5580 Token Ring Router modules from the chassis to install the memory card. The Model 5780 ATM Router module has an installation slot on the front. CAUTIO

ملخص المحتوى في الصفحة رقم 3

112770-A QI F/M Cards Page 3 Tuesday, December 17, 1996 6:43 AM Installing a Flash Memory Card 1. Position the card with the label facing up and the INSERT arrow pointing toward the card slot. Model 5380 Ethernet or Model 5580 Token Ring Router 6563.1 Model 5780 ATM Router 6501.2 2. Insert the card into the slot, and push the card until it fits snugly into place. 3

ملخص المحتوى في الصفحة رقم 4

112770-A QI F/M Cards Page 4 Tuesday, December 17, 1996 6:43 AM Removing a Flash Memory Card 1. Remove the router from the chassis. Refer to Using the Model 5380 Ethernet and Model 5580 Token Ring Routers for information about removing the router. CAUTION: The pins on the edge of the card can be damaged if you do not pull the card straight out from the socket. 4

ملخص المحتوى في الصفحة رقم 5

112770-A QI F/M Cards Page 5 Tuesday, December 17, 1996 6:43 AM Model 5380 Ethernet or Model 5580 Token Ring Router 6694.1 Model 5780 ATM Router 6502.1 2. Remove the flash memory card by gently pulling the card away from the connectors, or by pressing the button next to the slot. 5

ملخص المحتوى في الصفحة رقم 6

112770-A QI F/M Cards Page 6 Tuesday, December 17, 1996 6:43 AM Protecting Files on the Flash Memory Card Bay Networks ships each memory card with its read/write protect switch in the unprotected position. Bay Networks recommends making a copy of your configuration files on another flash memory card, write-protecting the card, and storing it in a safe place for backup purposes. NOTE: You typically do not operate a router with a write-protected memory card. You may need to perma

ملخص المحتوى في الصفحة رقم 7

112770-A QI F/M Cards Page 7 Tuesday, December 17, 1996 6:43 AM Unprotected Protected 6498.1 2. Set the read/write protect switch located on the edge opposite the INSERT arrow of the memory card. 3. Insert the memory card as described in “Installing a Flash Memory Card” earlier in this guide. 7