ملخص المحتوى في الصفحة رقم 1
MSI
MICRO-STAR INTERNATIONAL
MS-6533E/G/EG (v1.X)
Micro ATX Mainboard
Version 1.0
G52-MA00628
i
ملخص المحتوى في الصفحة رقم 2
Manual Rev: 1.0 Release Date: July 2002 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equip- ment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor- dance with the inst
ملخص المحتوى في الصفحة رقم 3
Edition July 2002 Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ® ® Intel and Pentium are registered trademarks of Intel Corporation. ® PS/2 and
ملخص المحتوى في الصفحة رقم 4
Safety Instructions 1. Read the safety instructions carefully. 2. Save this User’s Guide for possible use later. 3. Keep this equipment away from humidity. 4. Lay this equipment on a stable and flat surface before setting it up. 5. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Note: Do not cover the openings. 6. Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 110/220V before con
ملخص المحتوى في الصفحة رقم 5
CONTENTS Chapter 1. Getting Started ........................................................................ 1-1 Mainboard Specification ...................................................................... 1-2 Mainboard Layout ............................................................................... 1-5 Quick Components Guide .................................................................... 1-8 Chapter 2. Hardware Setup .................................................................
ملخص المحتوى في الصفحة رقم 6
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14 JCD1/JAUX1/JMD1 .................................................................... 2-15 CPUFA/SYSFA ............................................................................ 2-16 Front Panel Connectors: JFP1 & JFP2 ......................................... 2-17 Front Panel Audio Connector: JAUD .......................................... 2-18 Front USB Connectors: JUSB2 & JUSB3.................................
ملخص المحتوى في الصفحة رقم 7
PNP/PCI Configurations ..................................................................... 3-24 PC Health Status ................................................................................ 3-26 Frequency/Voltage Control ................................................................ 3-27 Load Fail-Safe/Optimized Defaults ..................................................... 3-29 Set Supervisor/User Password ........................................................... 3-30 Appendix: Using
ملخص المحتوى في الصفحة رقم 8
Getting Started Chapter 1. Getting Started 1 Getting Started Thank you for purchasing the MS-6533E/G/EG series Micro ATX mainboards. The MS-6533E/G/EG series are based on SiS645DX/SiS650GX/ SiS651 (co-layout) and SiS962L/SiS962 chipsets for optimal system efficiency. ® ® Designed to fit the advanced Intel Pentium 4 processors in the 478 pin package, the MS-6533 E/G/EG series deliver a high performance and profes- sional desktop platform solution. TOPICS Mainboard Specification 1-2 Mainboard La
ملخص المحتوى في الصفحة رقم 9
Chapter 1 Mainboard Specification CPU Socket 478 for P4 processors (Willimate 478 and Northwood 478) with 400/ 533 MHz (100/133MHz QDIR) Core frequency from 1.7GHz to 2.53 GHz and up Chipset ® SiS 645DX/650GX/651 HMAC/IGUI HMAC /IGUI HMAC (702 pin BGA) - High performance host interface 400/533 (645 DX and 651 only) MHz - Support 64-bit high performance DDR333 (645 DX and 651 only) / DDR266/DDR 200 and PC133/100 memory controller - Support AGP 4X/2X interface with fast write transaction - High
ملخص المحتوى في الصفحة رقم 10
Getting Started On-Board IDE Dual IDE controllers integrated in Sis 962L/962. Support P/O, Bus Master, Ultra DMA66/100/133 operation. Can connect up to four IDE devices. On-Board Peripherals On-Board Peripherals include: - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes. - 2 serial ports (COM A + COM B). - 1 parallel port supports SPP/EPP/ECP mode. - 6 USB ports (2.0/1.1) (Rear * 2/ Front * 4). - 1 IrDA connector for SIR. - 1 RJ-45 LAN jack (optional). - 1 audio/game p
ملخص المحتوى في الصفحة رقم 11
Chapter 1 BIOS 2Mb Award BIOS with PnP, ACPI, SMBIOS 2.3, Green and Boot Block. Provides DMI2.0, WfM2.0, WOL, WOR, chassis intrusion, and SMBus for system management. Dimension Micro ATX Form Factor: 9.6” x 9.6”. Mounting 6 mounting holes. 1-4
ملخص المحتوى في الصفحة رقم 12
Getting Started Mainboard Layout JPW1 Top : mouse Bottom: keyboard Top: LAN Jack CPUFA Bottom: USB ports Top : Parallel Port Bottom: COM A COM B Top : SiS Game port 645DX Bottom: Line-Out Line-In BIOS JAUX1 Mic AGP Slot Winbond JCD1 W83697HF BATT PCI Slot 1 + JMD1 RTL 8101L SYSFA JLAN PCI Slot 2 JMOD SiS 962L/962 JUSB2 Codec NEC PCI Slot 3 D72852GB JUSB3 JBAT1 JIR J1394_1 J1394_2 JAUD JFP2 JFP1 CNR J8 JSP1 MS-6533 E v1.X Micro ATX Mainboard 1-5 DIMM 1 DIMM 2 ATX Power Supply IDE 2 FDD 1 IDE
ملخص المحتوى في الصفحة رقم 13
Chapter 1 Mainboard Layout JPW1 Top : mouse Bottom: keyboard Top: LAN Jack CPUFA Bottom: USB ports Top : Parallel Port Bottom: COM A VGA port JCOM3 SiS Top : Game port 650GX Bottom: Line-Out Line-In BIOS JAUX1 Mic AGP Slot JCD1 Winbond W83697HF BATT PCI Slot 1 + JMD1 RTL 8101L SYSFA JLAN PCI Slot 2 SiS JMOD 962L/962 JUSB2 Codec NEC PCI Slot 3 D72852GB JUSB3 JBAT1 JIR J1394_1 J1394_2 JAUD JFP2 JFP1 CNR J8 JSP1 MS-6533 G v1.X Micro ATX Mainboard 1-6 DIMM 1 DIMM 2 ATX Power Supply IDE 2 FDD 1 I
ملخص المحتوى في الصفحة رقم 14
Getting Started Mainboard Layout JPW1 Top : mouse Bottom: keyboard Top: LAN Jack CPUFA Bottom: USB ports Top : Parallel Port Bottom: COM A VGA port JCOM3 SiS Top : Game port 651 Bottom: Line-Out Line-In BIOS JAUX1 Mic AGP Slot JCD1 Winbond W83697HF BATT PCI Slot 1 + JMD1 RTL 8101L SYSFA JLAN PCI Slot 2 JMOD SiS 962L/962 JUSB2 Codec NEC PCI Slot 3 D72852GB JUSB3 JIR J1394_1 J1394_2 JAUD JBAT1 JFP2 JFP1 J8 CNR JSP1 MS-6533 EG v1.X Micro ATX Mainboard 1-7 DIMM 1 DIMM 2 ATX Power Supply IDE 2 FD
ملخص المحتوى في الصفحة رقم 15
Chapter 1 Quick Components Guide Component Function Reference CONN1/JPW1 Power connectors See p. 2-7 JKBMS1 Mouse connector See p. 2-8 JKBMS1 Keyboard connector See p. 2-9 USB Connectors Connecting to USB devices See p. 2-9 COMA & COMB/JCOM3 Serial port connectors See p. 2-10 RJ-45 LAN Jack Connecting to LAN devices See p. 2-11 LPT1 Parallel port connector See p. 2-12 FDD1 Floppy disk drive connector See p. 2-13 J8 Chassis intrusion switch connector See p. 2-13 IDE1 & IDE2 Hard disk connectors S
ملخص المحتوى في الصفحة رقم 16
Hardware Setup Chapter 2. Hardware Setup 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components. TOPICS Central Processing Unit: CPU 2-2 Mem
ملخص المحتوى في الصفحة رقم 17
Chapter 2 CPU Installation Procedures for Socket 478 Open Lever 1. Please turn off the power and Sliding unplug the power cord before 90 degree Plate installing the CPU. 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90- Dot / Cut edge degree angle. 3. Look for the cut edge. The cut edge should point towards the lever pivot. The CPU can only fit in the correct orientation. Correct CPU placement 4. If the CPU is correctly O installed, the pins should be Do
ملخص المحتوى في الصفحة رقم 18
Hardware Setup Installing the CPU Fan As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly important. To dissi- pate heat, you need to attach the CPU cooling fan and heatsink on top of the CPU. Follow the instructions below to install the Heatsink/Fan: 1. Locate the CPU and its retention 2. Position the heatsink onto the reten- mechanism on the motherboard. tion mechanism. retention mechanism 3. Mount the fan on top of the heatsink. 4. P
ملخص المحتوى في الصفحة رقم 19
Chapter 2 5. fan power cable CPU Core Speed Derivation Procedure If CPU Clock = 100MHz Core/Bus ratio = 17 then CPU core speed = Host Clock x Core/Bus ratio = 100MHz x 17 = 1.7GHz Overclocking This motherboard is designed to support overclocking. However, please make sure your components are able to WARNING! tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond product specifications is not recommended. We do not guarantee the damages or risks caused by in
ملخص المحتوى في الصفحة رقم 20
Hardware Setup Memory The mainboard provides 2 slots for 184-pin, 2.5V DDR DIMM with 4 memory banks. You can install DDR266/PC2100 or DDR333/PC2700 DRAM modules on the DDR DIMM slots (DDR 1~2). The supported maximun memory size is 2GB. To operate properly, at least one DIMM module must be installed. Introduction to DDR SDRAM DDR (Double Data Rate) SDRAM is similar to conventional SDRAM, but doubles the rate by transferring data twice per cycle. It uses 2.5 volts as opposed to 3.3 volts used in
