Lindy 51131 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

1. Introduction



Thank you for purchasing the LINDY RAID SATA II 4 Port PCI Host
Adapter. This add-on card provides a 32 bit, PCI interface on the host

side and four, fully compliant Serial ATA II ports on the device.


The card can be used to upgrade your desktop computer to have 4

Serial ATA Channels and to support RAID 5, RAID 0+1, RAID 0, RAID 1

and JBOD features. It can control four independent Serial ATA channels.
Each channel has its own Serial ATA bus and will suppor

ملخص المحتوى في الصفحة رقم 2

5.4 Creating Parity RAID (RAID 5) Resolving Conflicts 1. As the BIOS boots, Press CTRL+S or F4 to enter the BIOS utility. 2. Select Create RAID set. Press Enter. When a RAID set is created, the metadata written to the disk 3. Select RAID 5 then press Enter. includes drive connection information (Primary and Secondary). 4. Select Auto configuration. Press Enter. If, after a disk failure, the replacement disk was previously part of a 5. Press Y to save your settings. RAID set (or used in ano