ملخص المحتوى في الصفحة رقم 1
®
Intel Entry Server Board SE7210TP1-E
User Guide
Order Number: C49109-002
ملخص المحتوى في الصفحة رقم 2
Disclaimers Disclaimer ® Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitne
ملخص المحتوى في الصفحة رقم 3
Preface Preface About this Manual ® Thank you for purchasing and using the Intel Entry Server Board SE7210TP1-E. This manual is written for system technicians who are responsible for troubleshooting, upgrading, and repairing this server board. This document provides a brief overview of the features of the board/chassis, a list of accessories or other components you may need, troubleshooting information, and instructions on how to add and replace components on the Intel Entry Server Board
ملخص المحتوى في الصفحة رقم 4
Preface Additional Information and Software If you need more information about this product or information about the accessories that can be used with this server board, go to this link to find the information below: http://www.support.intel.com/support/motherboards/server/SE7210TP1-E/index.htm In-depth technical information about this product, including BIOS settings and chipset ® information in the Intel Server Board SE7210TP1-E Technical Product Specification. The latest product info
ملخص المحتوى في الصفحة رقم 5
Safety Information Safety Information Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. Emissions Disclaimer To ensure EMC compliance with your local regional rules and regulations, the final configuration of your end system product may require additional EMC compliance testing. For more information please contact your local Intel Representative. See “Error! Hyperlink referenc
ملخص المحتوى في الصفحة رقم 6
Safety Information Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts insi
ملخص المحتوى في الصفحة رقم 7
Contents Contents Warnings ......................................................................................................... v 1 Server Board Features................................................................................. 11 Server Board Connector and Component Locations ............................................................13 Internal Component Connections..........................................................................................14 Configuration Jum
ملخص المحتوى في الصفحة رقم 8
Contents CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light ...............................36 Cannot Connect to a Server.........................................................................................37 Problems with Network.................................................................................................37 System Boots when Installing PCI Card.......................................................................38 Problems with Newly Installed Application
ملخص المحتوى في الصفحة رقم 9
Contents Figures ® Figure 1. Intel Server Board SE7210TP1-E.........................................................................11 Figure 2. Intel Server Board SE7210TP1-E Layout ..............................................................13 Figure 3. Making Connections to the Server Board ..............................................................14 Figure 4. Configuration Jumper Location..............................................................................15 Figure 5. B
ملخص المحتوى في الصفحة رقم 10
Contents x
ملخص المحتوى في الصفحة رقم 11
Server Board Features 1 Server Board Features ® This chapter briefly describes the main features of Intel Server Board SE7210TP1-E. This chapter provides a photograph of the product, a list of the server board features, and diagrams showing the location of important components and connections on the server board. This server board is available in two options: The server board SE7210TP1 includes dual-channel Serial ATA, and dual-channel Parallel ATA support. RAID 0 and 1 support is prov
ملخص المحتوى في الصفحة رقم 12
Server Board Features Table 1 summarizes the major features of the server board. Table 1. Server Board Features Feature Description ® ® Processors Support for an Intel Pentium 4 processor in an mPGA478 package with a 800/533/400 MHz system bus Four 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets Memory Support for up to 4 GB Unbuffered ECC system memory Support for single-sided or double-sided DIMMs (DDR266/333/400) - To run DDR400 memory at full speed requires an Intel P
ملخص المحتوى في الصفحة رقم 13
M K Server Board Features Server Board Features (continued) Power Management Support for ACPI: Suspend to RAM (STR) Wake on USB, PCI, RS-232, PS/2, LAN, and front panel ® Intel Server Management 5.8 support via mini Baseboard Management Server Management Controller (mBMC) Server Board Connector and Component Locations B B D D A A C C E E F F II LL G G H H HH KK II GG JJ J J K K II FF L L HH EE M M DD GG N N O O P P CC FF Q Q R R S S T T EE DD U U CC BB BB V V AA AA Z Z Y Y X X W
ملخص المحتوى في الصفحة رقم 14
Server Board Features Internal Component Connections The connections you make depend on the chassis you are installing the board into and the components you are installing. You may not need to make all of the connections shown in Figure 3. If your Server Board SE7210TP1-E is installed into the Server Chassis SC5250-E, make sure the hard drive cage is installed before making your connections. This is necessary because the hard drive cage contains one of the front system fans. 12 V B
ملخص المحتوى في الصفحة رقم 15
Server Board Features Configuration Jumpers J1D1 15 14 13 11 10 9 7 6 5 3 2 1 TP00630 Figure 4. Configuration Jumper Location Table 2. Configuration Jumper [J1D1] Jumper Name Pins What happens at system reset… CMOS clear 2-3 If these pins are jumpered, the CMOS settings will be cleared on the next reset. These pins should be jumpered on 1-2 for normal operation. Password Clear 6-7 If these pins are jumpered, administrator and user passwords will be cleared on the next reset. Th
ملخص المحتوى في الصفحة رقم 16
Server Board Features Back Panel Connectors AB C D E F TP00508 A. USB 1, 2, 3 B. Keyboard/mouse C. Serial port A D. Video E. NIC1 (1Gbit) F. NIC2 (10/100 Mbit) Figure 5. Back Panel Connectors The NIC LEDs at the right and left of each NIC provide the following information. Table 3. NIC LEDs NIC LED Color LED State Description NIC2 (10/100 Mbit) Off 10 Mbps connection (if right LED is on) Left LED Solid Green 100 Mbps connection On Network connection in place Right LED Bl
ملخص المحتوى في الصفحة رقم 17
Server Board Features Hardware Requirements To avoid integration difficulties and possible board damage, your system must meet the requirements outlined below. For a list of qualified components see the links under “Additional Information and Software.” Processor A minimum of one 2.0 GHz Intel Pentium 4 processor with 512KB cache support is required. For a complete list of supported processors, see the links under “Additional Information and Software.” Memory A minimum of one 128 MB U
ملخص المحتوى في الصفحة رقم 18
Server Board Features 18 Intel Server Board SE7210TP1-E User Guide
ملخص المحتوى في الصفحة رقم 19
Server Board Installations and Upgrades 2 Server Board Installations and Upgrades Before You Begin Before working with your server product, pay close attention to the Safety Information at the beginning of this manual. Tools and Supplies Needed * Phillips (cross head) screwdriver (#1 bit and #2 bit) Needle nosed pliers Antistatic wrist strap and conductive foam pad (recommended) Installing and Removing Memory The silkscreen on the board for the DIMMs displays DIMM1A, DIMM2A, DIMM1B,
ملخص المحتوى في الصفحة رقم 20
Server Installations and Upgrades 2B 2A 1B 1A 1 2 3 1 3 TP00518 Figure 6. Installing Memory 5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 6. Holding the DIMM by the edges, remove it from its anti-static package. 7. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM with the keys in the socket (see inset in Figure 6). 8. Insert the bottom edge of the DIMM into the socket. 9. When the DIMM is
