ملخص المحتوى في الصفحة رقم 1
IB935
(IB935, IB935RF)
®
Socket LGA775 Pentium 4
®
Intel Q35 Chipset
PICMG 1.3 SHB Express CPU Card
USER’S MANUAL
Version 1.0
ملخص المحتوى في الصفحة رقم 2
Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium 4 are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. ii IB935 User’s Manual
ملخص المحتوى في الصفحة رقم 3
Table of Contents Introduction .............................................................. 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 Specifications ...................................................................... 3 Board Dimensions ............................................................... 4 Installations .................................
ملخص المحتوى في الصفحة رقم 4
The IB935 CPU Card iv IB935 User’s Manual
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION Introduction Product Description The IB935 PICMG1.3 SHB board incorporates the Intel® Q35 Express Chipset, consisting of the Intel® Q35 Graphic Memory Controller Hub (GMCH) and Intel® I/O Controller Hub 9 (ICH9), is an optimized integrated graphics solution with a 800/1066/1333 MHz front-side bus. The integrated graphics engine, based on Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) architecture, supports Dual Independent Display and delivers richer visual
ملخص المحتوى في الصفحة رقم 6
INTRODUCTION Checklist ® Your IB935 Pentium 4 CPU card package should include the items listed below: • The IB935 CPU card • This User’s manual • 1 Floppy cable • 1 IDE cable • 1 USB cable with bracket (USB2K-4) • 1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse • 1 SATA cable • 2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a Mounting Bracket • 1 Audio cable with bracket (Audio-18K) • Optional backplane (IP314) • 1 CD containing the following: • Chipset
ملخص المحتوى في الصفحة رقم 7
INTRODUCTION Specifications IB935 Product Name PICMG 1.3 SHB Express full size CPU card Form Factor CPU Support Socket LGA775, Supports the Intel Core 2 Duo and Intel Core2 Quad processors, and Intel Celeron 400 (Conroe-L) Sequence processor. CPU Voltage 0.5V~1.6V (VRD 11.0) System Speed Up to 3.8GHz+ CPU FSB 800MHz/1066MHz/1333MHz Green /APM APM1.2 CPU Socket LGA 775 ® Intel Bearlake Chipset Chipset Q35 + ICH9 for IB935 Q35 + ICH9R for IB935RF BIOS Award BIOS; supp
ملخص المحتوى في الصفحة رقم 8
INTRODUCTION Board Dimensions 4 IB935 User’s Manual
ملخص المحتوى في الصفحة رقم 9
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB935 in order to set up a workable system. The topics covered are: Installing the CPU ........................................................................ 6 Installing the Memory .................................................................. 7 Setting the Jumpers ...................................................................... 8 Connectors on IB935 ..............
ملخص المحتوى في الصفحة رقم 10
INSTALLATIONS Installing the CPU The IB935 board supports an LGA 775 processor socket for Intel Core 2 Duo and Intel Core2 Quad processors, and Intel Celeron 400(Conroe-L) Sequence processor. The LGA 775 processor socket comes with a lever to secure the processor. Refer to the pictures below, from left to right, on how to place the processor into the CPU socket. Please note that the cover of the LGA775 socket must always be installed during transport to avoid damage to the socket
ملخص المحتوى في الصفحة رقم 11
INSTALLATIONS Installing the Memory The IB935 board supports two DDR2 memory sockets for a maximum total memory of 4GB in DDR2 memory type. It supports DDR2 667/800. Basically, the system memory interface has the following features: Supports two 64-bit wide DDR data channels Available bandwidth up to 6.4GB/s (DDR2 800) for single-channel mode and 12.8GB/s (DDR2 800) in dual-channel mode. Supports 256Mb, 512Mb, 1Gb DDR2 technologies. Supports only x8, x16, DDR2 devices with four
ملخص المحتوى في الصفحة رقم 12
INSTALLATIONS Setting the Jumpers Jumpers are used on IB935 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB935 and their respective functions. Jumper Locations on IB935 ................................................................... 9 JP1, JP2, JP3: RS232/422/485 (COM2) Selection .............................. 10 JP4:
ملخص المحتوى في الصفحة رقم 13
INSTALLATIONS Jumper Locations on IB935 Jumpers on IB935 ............................................................................. Page JP1, JP2, JP3: RS232/422/485 (COM2) Selection .............................. 10 JP4: Configure and Recovery (Factory use only) ................................ 10 JP5: Power ON Setting ........................................................................ 10 JP7: ICH9 PCI-E port 1-4 Configuration Settings .............................. 11 JP11
ملخص المحتوى في الصفحة رقم 14
INSTALLATIONS JP1, JP2, JP3: RS232/422/485 (COM2) Selection COM1 is fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following table describes the jumper settings for COM2 selection. COM2 RS-232 RS-422 RS-485 Function JP1: JP1: JP1: 1-2 3-4 5-6 Jumper Setting JP2: JP2: JP2: (pin closed) 3-5 & 4-6 1-3 & 2-4 1-3 & 2-4 JP3: JP3: JP3: 3-5 & 4-6 1-3 & 2-4 1-3 & 2-4 JP4: Configure and Recovery (Factory use only) JP9 Setting Func
ملخص المحتوى في الصفحة رقم 15
INSTALLATIONS JP7: ICH9 PCI-E port 1-4 Configuration Settings JP7 Setting Function Pin 1-2 & 3-4 ICH9 PCI-E port 1-4 setting as 1x PCI-E x4 Short Pin 1/2/3/4 ICH9 PCI-E port 1-4 setting as 4x PCI-E x1 Open JP11: Clear CMOS Contents Use JP11 to clear the CMOS contents. Note that the ATX-power connector should be disconnected from the board before clearing CMOS. JP11 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed
ملخص المحتوى في الصفحة رقم 16
INSTALLATIONS Connectors on IB935 The connectors on IB935 allow you to connect external devices such as keyboard, mouse, hard disk drives, printers… etc. The following table lists the connectors on IB935 and their respective functions. Connector Locations on IB935 ............................................................ 13 ATX1: ATX 12V Power Connector ................................................... 14 DIMM1: Channel A DDR2 Socket ..........................
ملخص المحتوى في الصفحة رقم 17
INSTALLATIONS Connector Locations on IB935 ATX1: ATX 12V Power Connector DIMM1: Channel A DDR2 Socket DIMM2: Channel B DDR2 Socket CPU_FAN1: CPU Fan Power Connector SYS_FAN1, SYS_FAN2: System Fan Power CN1, CN2, CN3, CN4: SATA HDD Connector IDE1: Primary IDE Connectors FDC1: Floppy Drive Connector VGA1: VGA CRT Connector J1: External Audio Connector J2: Parallel Port Connector J3: Digital I/O Connector (4 in, 4 out) J4: IrDA Connector J5: CD-In Audio Connector J6: COM2 Serial Port J
ملخص المحتوى في الصفحة رقم 18
INSTALLATIONS ATX1: ATX 12V Power Connector Pin # Signal Name 1 Ground 2 Ground 3 +12V 4 +12V DIMM1: Channel A DDR2 Socket DIMM1is the first-channel DDR2 sockets. DIMM2: Channel B DDR2 Socket DIMM2 is the second-channel DDR2 sockets. CPU_FAN1: CPU Fan Power Connector Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection 4 Control SYS_FAN1, SYS_FAN2: SYSTEM Fan Power Connector Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection CN1, CN2, CN3,
ملخص المحتوى في الصفحة رقم 19
INSTALLATIONS IDE1: Primary IDE Connector Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host data 11 Host data 3 11 12 Host data 12 Host data 2 13 14 Host data 13 Host data 1 15 16 Host data 14 Host data 0 17 18 Host data 15 Ground 19 20 Protect pin DRQ0 21 22 Ground Host IOW 23 24 Ground Host IOR 25 26 Ground IOCHRDY 27 28 Host ALE DACK0 29 30 Ground IRQ14 31 32 No connect Ad
ملخص المحتوى في الصفحة رقم 20
INSTALLATIONS VGA1: VGA CRT Connector Signal Name Pin # Pin # Signal Name Red 1 2 Green Blue 3 4 N.C. GND 5 6 GND GND 7 8 GND VCC 9 10 GND N.C. 11 12 DDCDATA HSYNC 13 14 VSYNC DDCCLK 15 J1: External Audio Connector J1 is a 12-pin header that is used to connect to the optional audio cable that integrates jacks for Line In, Line Out and Mic. Signal Name Pin # Pin # Signal Name LINEOUTR 1 2 LINEOUTL Ground 3 4 Ground LINEINR 5 6 LINEIN L Ground 7 8 Gr
