ملخص المحتوى في الصفحة رقم 1
GA-965P-DS3
® TM TM
Intel Core 2 Extreme / Core 2 Duo
® ®
Intel Pentium Processor Extreme Edition
® ® ®
Intel Pentium D / Pentium 4 LGA775 Processor Motherboard
User's Manual
Rev. 1002
12ME-965PDS3-1002R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member
ملخص المحتوى في الصفحة رقم 2
Motherboard GA-965P-DS3 Motherboard GA-965P-DS3 June 21, 2006 June 21, 2006
ملخص المحتوى في الصفحة رقم 3
Copyright © 2006 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
ملخص المحتوى في الصفحة رقم 4
Table of Contents Item Checklist ................................................................................................................. 6 Optional Accessories ...................................................................................................... 6 GA-965P-DS3 Motherboard Layout ............................................................................... 7 Block Diagram ..................................................................................................
ملخص المحتوى في الصفحة رقم 5
Chapter 3 Install Drivers ............................................................................................. 49 3-1 Install Chipset Drivers .................................................................................... 49 3-2 Software Applications ..................................................................................... 50 3-3 Driver CD Information .................................................................................... 50 3-4 Hardware Information .......
ملخص المحتوى في الصفحة رقم 6
Item Checklist IDE Cable x 1 and FDD Cable x 1 SATA 3Gb/s Cable x 4 I/O Shield * The items listed above are for reference only, and are subject to change without notice. Optional Accessories 2 Ports USB2.0 Cable (Part Number: 12CR1-1UB030-51/R) 4 Ports USB2.0 Cable (Part Number: 12CR1-1UB030-21/R) - 6 -
ملخص المحتوى في الصفحة رقم 7
GA-965P-DS3 Motherboard Layout CPU_FAN ATX_12V KB_MS COAXIAL LGA775 ATX OPTICAL ® Intel P965 AUDIO PCIE_3 FDD Marvell PCIE_16 88E8053 PCIE_1 CLR_CMOS ® PCIE_2 Intel ICH8 BATTERY SATAII0 CODEC PCI1 GSATAII0 SATAII1 GSATAII1 SATAII2 GIGABYTE PCI2 SATA2 SATAII3 IDE1 BIOS PCI3 CD_IN F_PANEL CI SPDIF_I F_USB1 F_USB2 F_USB3 PWR_LED - 7 - USB USB COMA LPT LAN IT8718 F_AUDIO GA-965P-DS3 DDRII1 DDRII2 DDRII3 DDRII4 SYS_FAN
ملخص المحتوى في الصفحة رقم 8
Block Diagram PCI-E CLK (100MHz) CPUCLK+/-(266/200/133MHz) LGA775 Processor Host Interface (Note) DDRII 800/667/533MHz DIMM PCI Express x16 ® Dual Channel Memory Intel P965 LAN MCHCLK (266/200/133MHz) 2 SATA 3Gb/s ATA33/66/100/133 RJ45 IDE Channel GIGABYTE Marvell SATA2 88E8053 x1 x1 PCI Express Bus BIOS x1 x1 x1 4 SATA 3Gb/s ® Intel PCI-E CLK ICH8 (100MHz) LPT 3 PCI Express x1 Floppy PCI Bus IT8718 COM Port CODEC PS/2 KB/Mouse 10 USB Ports 3 PCI PCICLK (33MHz) (Note) To use a DDR II 800/667
ملخص المحتوى في الصفحة رقم 9
English Chapter 1 Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic
ملخص المحتوى في الصفحة رقم 10
1-2 Feature Summary ® TM TM ® CPU Supports LGA775 Intel Core 2 Extreme / Core 2 Duo / Pentium Proces- ® ® sor Extreme Edition / Pentium D / Pentium 4 L2 cache varies with CPU Front Side Bus Supports 1066/800/533MHz FSB ® Chipset Northbridge: Intel P965 Express Chipset ® Southbridge: Intel ICH8 LAN Onboard Marvell 88E8053 phy (10/100/1000 Mbit) Audio Onboard Realtek ALC883 chip Supports High Definition Audio Supports 2 / 4 / 6 / 8 channel audio Supports SPDIF In/Out connection Supports
ملخص المحتوى في الصفحة رقم 11
English Rear Panel I/O 1 PS/2 keyboard port 1 PS/2 mouse port 1 SPDIF Out connection (coaxial+optical) 1 parallel port 4 USB 2.0/1.1 ports 1 serial port (COMA) 1 RJ-45 port 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out) I/O Control IT8718 chip Hardware Monitor System voltage detection CPU / System temperature detection CPU / System fan speed detection CPU warning temperature CPU / System fan failure
ملخص المحتوى في الصفحة رقم 12
1-3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat paste between the CPU and CPU cooler. 4. Please make sure the CPU cooler is installed
ملخص المحتوى في الصفحة رقم 13
English 1-3-2 Installation of the CPU Cooler Male Push Pin The top of Female Push Pin Female Push Pin Fig.1 Fig. 2 Please apply an even layer of heat paste on the (Turning the push pin along the direction of arrow is to surface of the installed CPU. remove the CPU cooler, on the contrary, is to install.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan) Fig. 3 Fig. 4 Place the CPU cooler atop the
ملخص المحتوى في الصفحة رقم 14
1-4 Installation of Memory Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed in only o
ملخص المحتوى في الصفحة رقم 15
English Dual Channel Memory Configuration The GA-965P-DS3 supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of memory bus will double. The GA-965P-DS3 includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel 0 : DDRII1, DDRII2 Channel 1 : DDRII3, DDRII4 If you want to operate the Dual Channel Technology, please note the following explanations due to the limitation of Intel chipset specifications. 1. Dual Channel mode will
ملخص المحتوى في الصفحة رقم 16
1-5 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of
ملخص المحتوى في الصفحة رقم 17
English 1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). LPT (Parallel Port) The parallel port allows connection of a printer, scanner and other peripheral devices. COAXIAL (SPDIF Out) The SPDIF coaxial output port is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder via a coaxial c
ملخص المحتوى في الصفحة رقم 18
Line Out (Front Speaker Out) The default Line Out (Front Speaker Out) jack. Stereo speakers, earphone or front surround speakers can be connected to Line Out (Front Speaker Out) jack. MIC In The default MIC In jack. Microphone must be connected to MIC In jack. In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be connected to the default Mic In jack ( ) . Please refer to the 2-/4-
ملخص المحتوى في الصفحة رقم 19
English 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will
ملخص المحتوى في الصفحة رقم 20
3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 4-pin power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to prevent CPU damage or
