Compaq PowerLeap JP1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
www.powerleap.com  www.friendtech.com

™
PowerLeap PL-P3/SMP Installation Guide
Slot 1 Server/Workstation CPU Upgrade Adapter
Before You Start…

Check the website of your system or motherboard manufacturer to see if they are What is the PowerLeap PL-P3/SMP?
offering an updated BIOS version for your system. If you need to upgrade your
system BIOS, do so before removing your old CPU.
For more information about BIOS upgrades, refer to “Upgrading Your Computer’s

ملخص المحتوى في الصفحة رقم 2

Installation Guide www.powerleap.com  www.friendtech.com Installation Installing the PL-P3/SMP™ is quick and easy: First, remove the original processors from the motherboard’s processor slots. Next, insert a processor into the PL-P3/SMP™, apply thermal compound to the processor, and install the heatsink/fan. Finally, install the PL-P3/SMP™ into the motherboard’s processor slot and make power connections. Removing the original processors from the CPU slots The original Slot 1 p

ملخص المحتوى في الصفحة رقم 3

Installation Guide www.powerleap.com  www.friendtech.com The heatsink with protective membrane. Peeling off the protective membrane. Installing the heatsink/fan onto the processor. Attaching the heatsink/fan's retaining Attaching the heatsink/fan's retaining Connecting the fan's power cable to the clip to the ZIF socket. (1) clip to the ZIF socket. (2) PL-P3/SMP. Installing the PL-P3/SMP™ and connecting to a power supply For most systems, you can connect the provided power c

ملخص المحتوى في الصفحة رقم 4

Installation Guide www.powerleap.com  www.friendtech.com Inserting the second PL-P3/SMP into Connecting the 4-pin end of the The connected cables for two the processor slot. PL-P3/SMP’s power cable to an unused PL-P3/SMPs. 4-pin connector from the power supply. Important! Do not connect the PL-P3/SMP to a connector from a hard disk drive or other device. Other Power Connection Options If you can’t connect the PL-P3/SMP to an unused connector from your power supply (as shown

ملخص المحتوى في الصفحة رقم 5

Installation Guide www.powerleap.com  www.friendtech.com Inserting the first PL-P3/SMP into the Inserting the second PL-P3/SMP into Connecting the power cable to the first processor slot. the processor slot. PL-P3/SMP. Connecting the power cable to the Dual PL-P3/SMPs, installed and second PL-P3/SMP. connected. Troubleshooting
If the computer won’t boot (blank screen) with the PL-P3/SMP™ installed, most likely the CPU is NOT inserted firmly in the upgrade adapter. A

ملخص المحتوى في الصفحة رقم 6

Installation Guide www.powerleap.com  www.friendtech.com Upgrading Your Computer’s BIOS Some motherboards may require a BIOS upgrade in order to work with the latest Pentium III and Celeron CPUs. For information about getting a BIOS upgrade for your computer system, start by visiting the brand-name manufacturer’s web site. Do this with your original CPU installed in the motherboard. BIOS upgrades may be downloaded from the system vendor or the motherboard maker’s website(s). If you