ملخص المحتوى في الصفحة رقم 1
9084
HD/SD-SDI RGB Color Corrector with
YCbCr Video Proc and Frame Sync
Product Manual
Cobalt Digital Inc.
2406 E. University Ave.
Urbana, IL 61802
Voice 217.344.1243 • Fax 217.344.1245
www.cobaltdigital.com
9084-OM (V4.0)
ملخص المحتوى في الصفحة رقم 2
Copyright ©Copyright 2009, Cobalt Digital Inc. All Rights Reserved. Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc. Reproduction or reverse engineering of software used i
ملخص المحتوى في الصفحة رقم 3
Table of Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Overview ................................................................................................................ 1-1 9084 Card Software Versions and this Manual...................................................... 1-2 Manual Conventions............................................................................................... 1-3 Warnings, Cautions, and
ملخص المحتوى في الصفحة رقم 4
Chapter 3 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Overview ................................................................................................................. 3-1 Control and Display Descriptions ........................................................................... 3-1 Function Submenu/Parameter Submenu Overview .................................... 3-2 9084 Card Edge Controls, Indicators, and Display....................
ملخص المحتوى في الصفحة رقم 5
Chapter 1 Chapter 1 Introduction Overview This manual provides installation and operating instructions for the 9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync card (also referred to herein as the 9084). This manual consists of the following chapters: • Chapter 1, “Introduction” – Provides information about this manual and what is covered. Also provides general information regarding the 9084. • Chapter 2, “Installation and Setup” – Provides instructions for installi
ملخص المحتوى في الصفحة رقم 6
1 9084 Card Software Versions and this Manual 9084 Card Software Versions and this Manual When applicable, Cobalt Digital Inc. provides for continual COMPASS™ card product enhancements through software updates. As such, functions described in this manual may pertain specifically to cards loaded with a particular software build. If you received your 9084 and this manual at the same time, this manual reflects all facets of your card. This manual (9084-OM (V4.0)) was specifically written for
ملخص المحتوى في الصفحة رقم 7
Introduction Manual Conventions Manual Conventions In this manual, display messages and connectors are shown using the exact name shown on the 9084 itself. Examples are provided below. • Card-edge display messages are shown like this: E201 • Connector names are shown like this: SDI IN In this manual, the terms below are applicable as follows: • 9084 refers to the 9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync card. ® • Frame refers to the 8310 (or similar) frame that
ملخص المحتوى في الصفحة رقم 8
1 Safety Summary Labeling Symbol Definitions Attention, consult accompanying documents. Electronic device or assembly is susceptible to damage from an ESD event. Handle only using appropriate ESD prevention practices. If ESD wrist strap is not available, handle card only by edges and avoid contact with any connectors or components. Symbol (WEEE 2002/96/EC) For product disposal, ensure the following: Do not dispose of this product as unsorted municipal waste. Collect this product separat
ملخص المحتوى في الصفحة رقم 9
Introduction 9084 Functional Description 9084 Functional Description Figure 1-1 shows a functional block diagram of the 9084. The 9084 provides HD/SD-SDI RGB color correction with frame synchronization that supports all popular SD and HD video formats including 525i, 625i, 720p, 720f, 1080i, 1080p, and 1080psF. Input video format is auto-detected by the card. The 9084 accepts either an HD SDI input (1.485 Gbit) or an SD SDI input (270 Mbit) and automatically equalizes for cable loss. The 90
ملخص المحتوى في الصفحة رقم 10
1 9084 Functional Description Figure 1-1 9084 Functional Block Diagram 1-6 9084 PRODUCT MANUAL 9084-OM (V4.0) Reclock RCK OUT Video Processor Frame Video AFD Sync Processing Insertion EXT REF IN (1,2) RGB YCbCr YCbCr Correction Proc Limiting Color Corrector SDI Serializer/ HD/SD OUT Cable Drivers SDI IN Deserialize EQ 9084V4.0BD
ملخص المحتوى في الصفحة رقم 11
Introduction 9084 Functional Description Color Corrector The 9084 color corrector converts the YCbCr SDI input video to the 4:4:4 RGB color space (where the color correction is applied), and then back to YCbCr SDI on the output. Controls are available to adjust each RGB level independently for both white levels (gain) and black levels (offset). Gamma can also be independently adjusted for each RGB channels. Various controls can be ganged to provide adjustment for all three color channels s
ملخص المحتوى في الصفحة رقم 12
1 9084 Functional Description User Control Interface Figure 1-2 shows the user control interface options for the 9084. These options are individually described below. Note: All user control interfaces described here are cross-compatible and can oper- ate together as desired. Where applicable, any control setting change made using a particular user interface is reflected on any other connected interface. OGCP-9000/CC Control Panel or OGCP-9000 Control Panel Remote Control Panel Using the Contr
ملخص المحتوى في الصفحة رقم 13
Introduction 9084 Functional Description • Built-in Card Edge User Interface – Using the built-in card edge controls and display, card control settings can be set using a front panel menu which is described in Chapter 3,“Operating Instructions”. Note: Some of the 9084 functions described in this manual are available only when ® using the DashBoard™, or Cobalt OGCP-9000 or OGCP-9000/CC Control Panels user interfaces. • DashBoard™ User Interface – Using DashBoard™, the 9084 and ® other card
ملخص المحتوى في الصفحة رقم 14
1 9084 Functional Description Note: Although the OGCP-9000 Remote Control Panel can be used with the 9084, the OGCP-9000/CC Remote Control Panel is specifically designed for use with 9084 cards and provides the most intuitive and simplest interface of all the methods described. 9084 Rear I/O Modules The 9084 physically interfaces to system video connections at the rear of its frame using a Rear I/O Module. All inputs and outputs shown in the 9084 Functional Block Diagram (Figure 1-1) enter
ملخص المحتوى في الصفحة رقم 15
Introduction Technical Specifications Technical Specifications Table 1-2 lists the technical specifications for the 9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync card. Table 1-2 Technical Specifications Item Characteristic Part number, nomenclature 9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync Installation/usage environment Intended for installation and usage in frame meeting openGear™ modular system definition. Power consumption < 15 Watts
ملخص المحتوى في الصفحة رقم 16
1 Technical Specifications Table 1-2 Technical Specifications — continued Item Characteristic Serial Digital Video Input (cont.) SD Frame Rates Supported: 486i 29.97 (NTSC) 575i 25 (PAL) Impedance: 75 Ω terminating Equalization (HD): 328 ft (100 m) Belden 1694A Equalization (SD): 1000 ft (305 m) Belden 1694A Return Loss: > 15 dB at 5 MHz – 1.485 GHz Post-Processor Serial Digital Video Number of Outputs: Outputs Four HD/SD-SDI BNC per IEC 60169-8 Amendment 2 Impedance: 75 Ω Return Loss: > 15 dB
ملخص المحتوى في الصفحة رقم 17
Introduction Technical Specifications Table 1-2 Technical Specifications — continued Item Characteristic Pre-Processor (Reclocked) Serial Digital Return Loss: Video Outputs (cont.) > 15 dB at 5 MHz – 270 MHz > 12 dB at 270 MHz – 1.485 GHz Signal Level: 800 mV ± 10% DC Offset: 0 V ± 50 mV Jitter (HD): < 0.15 UI (all outputs) Jitter (SD): < 0.10 UI (all outputs) Overshoot: < 0.2% of amplitude Reference Video Input Number of Inputs: Two Non-Terminating (looping) Frame Reference Inputs Standards Sup
ملخص المحتوى في الصفحة رقم 18
1 Warranty and Service Information Warranty and Service Information Cobalt Digital Inc. Limited Warranty This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of shipment to the original purchaser, except that 4000, 5000, 6000, 8000 series ® power supplies, and Dolby modules (where applicable) are warranted to be free from defects in material and workmanship for a period of one (1) year. Cobalt Digital Inc.'s (“Cobalt”) sole
ملخص المحتوى في الصفحة رقم 19
Introduction Contact Cobalt Digital Inc. Contact Cobalt Digital Inc. Feel free to contact our friendly and professional support representatives for any of the following: • Name and address of your local dealer • Product information and pricing • Technical support • Upcoming trade show information Phone: (217) 344-1243 Fax: (217) 344-1245 Web: www.cobaltdigital.com General Information: info@cobaltdigital.com Technical Support: support@cobaltdigital.com 9084-OM (V4.0) 9084 PRODUCT MANUAL 1-15
ملخص المحتوى في الصفحة رقم 20
This page intentionally blank 1-16 9084 PRODUCT MANUAL 9084-OM (V4.0)
