ملخص المحتوى في الصفحة رقم 1
USER GUIDE
3-PORT FIREWIRE® PCI CARD
Model: 29970
1
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Introduction....................................................................................................................................................2 Features........................................................................................................................................................3 System Requirements...................................................................................................................................4
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION Thank you for purchasing the 3-Port FireWire PCI Card. This product conveniently adds three 400 Mbps 6- pin ports to your PC or Mac desktop computer with this easy-to-use FireWire PCI controller card. This 32- bit card is fully hot-swappable and daisy-chainable up to 63 devices in peer-to-peer configuration. Plug- and-play so you can download and edit your digital video (DV) for cameras/camcorders; or use with hard disks, scanners, set-top boxes and other high-tech appliances
ملخص المحتوى في الصفحة رقم 4
FEATURES Supports 100/200/400 Mbps transfer rate Compliant to IEEE 1394-1995 and 1394a supplement 32-bit PCI Card compliant Supports up to 63 devices in peer-to-peer configuration Compliant with Open Host Controller Interface (OHCI) 1.0 specification 3
ملخص المحتوى في الصفحة رقم 5
SYSTEM REQUIREMENTS Windows® 98SE/Me/2000/XP/Vista/7 and Mac® OS 10.X.X or higher 4
ملخص المحتوى في الصفحة رقم 6
PACKAGE CONTENTS (1) 3-Port FireWire PCI Card User Manual 5
ملخص المحتوى في الصفحة رقم 7
DEVICE INSTALLATION This section will explain how to install the FireWire card into your computer. Step 1 Power off the computer, then disconnect the power cord. Step 2 Remove each screw found on the back of the computer and remove the shell from the computer. Step 3 With the power cord disconnected from your computer, you can touch the metal part of the case to ground yourself. This will discharge any static electricity which can damage your computer. Step 4 Locate an
ملخص المحتوى في الصفحة رقم 8
DEVICE INSTALLATION Step 6 If necessary, remove the knockout on the back of the computer which corresponds to the PCI slot you have confirmed as your selection. If there is a screw, place it in a safe spot as you will be using it to attach the FireWire 1394 Port. Step 7 Push the FireWire 1394 Port card firmly into the PCI slot. Apply pressure as needed until the edge connector is completely sealed. Step 8 Once the FireWire 1394 is fully seated, the gold edge connectors are comp
ملخص المحتوى في الصفحة رقم 9
DRIVER INSTALLATION-WINDOWS 98SE/ME/WINDOWS 2000 When you initially connect your FireWire 1394 card, Windows will automatically detect you have a new device the first time you power on your computer and thus request the device software drivers. Please follow the step-by-step instructions below to install the drivers. Step 1 At the Add New Hardware Wizard, click on “Next” Step 2 Select the option “Search for the best driver for your devices (Recommend)”, and click on “N
ملخص المحتوى في الصفحة رقم 10
DRIVER INSTALLATION-WINDOWS 98SE/ME/WINDOWS 2000 Step 4 Click “Next” and then “Finish” respectively. Step 5 Reboot your computer for setup to take effect. Verify Installation From the main desktop, click on My Computer, then double-click on Control Panel System Device Manager and you will see the FireWire card listed in the device list. 9
ملخص المحتوى في الصفحة رقم 11
DRIVER INSTALLATION-WINDOWS XP Step 1 At the Add New Hardware Wizard, click on “Next” Step 2 Select the option “Search for the best driver for your devices (Recommend)”, and click on “Next” Step 3 Select the option “Specify the location”, and type in C: then click on “Next” Step 4 Click “Next” and then “Finish” respectively. Step 5 Select “Yes” to reboot the computer for the setup to take effect 10
ملخص المحتوى في الصفحة رقم 12
DRIVER INSTALLATION-WINDOWS XP Verify Installation From the main desktop, click on “My Compute”, and then double-click on “Control Panel”, “System”, and “Device Manager”. 11
ملخص المحتوى في الصفحة رقم 13
DRIVER INSTALLATION-WINDOWS VISTA/ WINDOWS 7 Step 1 Start power to run Windows Vista or Windows 7 Step 2 Windows will automatically detect you have a new device the first time you power on your PC and thus request the devices software drivers. Step 3 Detect you have device to Install device software 12
ملخص المحتوى في الصفحة رقم 14
DRIVER INSTALLATION-WINDOWS VISTA/ WINDOWS 7 Step 4 Install the driver “VIA OHCI Compliant IEEE 1394 Host ontroller” Step 5 Check “Device Manager” to “IEEE 1394 Bus host controllers” and the “VIA OHCI Compliant IEEE 1394 Host Controller” 13
ملخص المحتوى في الصفحة رقم 15
TROUBLESHOOTING If after installing the drive and loading the software and you find that the PCI 1394 card is not functional, try these suggestions first. • Are ports active on the card conflicting with equivalent ports in the computer? • Is the card inserted snugly into the slot on the main board? 14
ملخص المحتوى في الصفحة رقم 16
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd.
ملخص المحتوى في الصفحة رقم 17
16
ملخص المحتوى في الصفحة رقم 18
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.3.22.10 17
