ملخص المحتوى في الصفحة رقم 1
®
TUSL2-M
®
Intel 815E Chipset
microATX Motherboard
USER’S MANUAL
ملخص المحتوى في الصفحة رقم 2
USER'S NOTICE No part of this manual, including the products and software described herein, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except for documentation kept by the purchaser for backup purposes, without the expressed written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
ملخص المحتوى في الصفحة رقم 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2890-7698 Newsgroup: cscnews.asus.com.tw Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNAT
ملخص المحتوى في الصفحة رقم 4
CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Organized .................................................. 7 1.2 Item Checklist ............................................................................. 7 2. FEATURES ........................................................................................ 8 2.1 The ASUS TUSL2-M ................................................................. 8 2.2 TUSL2-M Moth
ملخص المحتوى في الصفحة رقم 5
CONTENTS 4.3 Main Menu ................................................................................ 52 4.3.1 Primary & Secondary Master/Slave .............................. 53 4.3.2 Keyboard Features ......................................................... 56 4.4 Advanced Menu ........................................................................ 58 4.4.1 Chip Configuration ........................................................ 61 4.4.2 I/O Device Configuration .........................
ملخص المحتوى في الصفحة رقم 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
ملخص المحتوى في الصفحة رقم 7
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Instructions on setting up the motherboard. 4. BIOS SETUP Instructions on setting up the BIOS 5. SOFTWARE SETUP Instructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference
ملخص المحتوى في الصفحة رقم 8
2. FEATURES Specifications 2. FEATURES 2.1 The ASUS TUSL2-M The ASUS TUSL2-M motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Latest Intel Processor Support ® PIII Tualatin™ 133/100MHz FSB FC-PGA2 ® PIII Coppermine™ 133/100MHz FSB FC-PGA Celeron™ 100/66MHz FSB FC-PGA ® • North Bridge System Chipset: The Intel 82815E Graphics Memory Controller Hub (GMCH) chipset supports 66/100/133 Front Side Bu
ملخص المحتوى في الصفحة رقم 9
2. FEATURES • CNR Support: A Communication and Networking Riser (CNR) slot provides an interface to support very affordable multichannel audio, V.90 analog modem, Home PNA, 10/100 Ethernet networking, USB hub, as well as future technologies such as xDSL. • PCI Expansion Slots: Provides three 32-bit PCI (PCI 2.2 compliant) expansion slots. All PCI slots can support Bus Master PCI cards, such as SCSI or LAN cards. (PCI supports up to 133MB/s maximum throughput.) • Super Multi-I/O: Provides two hi
ملخص المحتوى في الصفحة رقم 10
2. FEATURES Performance 2. FEATURES 2.1.2 Specifications–Optional Components The following onboard components are optional at the time of purchase: • Smart Networking: Features 3Com’s 3C920 Fast Ethernet controller, which supports Wired for Management, remote wake-up, and OnNow initiatives to reduce Total Cost of Ownership (TCO). • Onboard Audio: AC’97 Audio chipset supports the latest audio sound circuitry. A software package helps setup the multi-channel PC sound system. 2.1.3 Performance •
ملخص المحتوى في الصفحة رقم 11
2. FEATURES • PC’99 Compliant: Both the BIOS and hardware levels of ASUS smart series motherboards are PC’99 compliant. The new PC’99 requirements for systems and components are based on the following high-level goals: support for Plug- n-Play capability and power management for configuring and managing all system components, and 32-bit device drivers and installation procedures for Windows95/98/NT . Color-coded connectors and descriptive icons make identification easy as required by PC’99. 2.
ملخص المحتوى في الصفحة رقم 12
2. FEATURES MB Components 2. FEATURES 2.2 TUSL2-M Motherboard Components See opposite page for locations. Location Processor Support Socket 370 for Pentium III/Celeron/Tualatin CPUs.. ............... 2 Feature Setting DIP Switches ................................................... 8 Chipsets Intel 82815E Graphics Memory Controller Hub (GMCH) ...... 3 Intel 82801BA I/O Controller Hub (ICH2) .......................... 13 2Mbit Firmware Hub (FWH) ...............................................
ملخص المحتوى في الصفحة رقم 13
2. FEATURES 2.2.1 Component Locations 1 234 5 6 7 8 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 1312 1110 9 ASUS TUSL2-M User’s Manual 13 2. FEATURES Component Location
ملخص المحتوى في الصفحة رقم 14
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 TUSL2-M Motherboard Layout CPU_FAN PS/2KBMS T: Mouse B: Keyboard USB Top: T: USB1 RJ-45 B: USB2 COM1 USBPWR1 KBPWR Socket 370 DSW PWR_FAN Intel 815E VGA Graphics & LED Memory Line Controller Out Hub (GMCH) COM2 LCDTV Line Super In SMARTCARD I/O AUX Mic In 0 1 2 3 4 5 1 1 1 Accelerated Graphics Port (AGP) HEADPHONE CR2032 3V ® Lithium Cell MODEM CMOS Power AAPANEL PCI1 Intel I/O 2Mbit Controller Firmware CD Hub TUSL2-M Hub Audio (ICH2) (FWH)
ملخص المحتوى في الصفحة رقم 15
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN p. 18 JumperFree™ Mode (Enable/Disable) 2) USBPWR1 p. 19 USB Device Wake Up (Enable/Disable) USBPWR2 3) USBCNR1/USBCNR2 p. 19 USB/CNR Selection (USB2 Connect/CNR) 4) AUD_EN1 p. 20 Onboard Audio CODEC Setting (Enable/Disable) 5) LAN_EN p. 20 Onboard LAN Setting (Enable/Disable) 6) KBPWR p. 21 Keyboard Power Up (Enable/Disable) 7) DSW p. 22 CPU External Frequency Setting Expansion Slots 1) DIMM1/2/3 p. 24 168-Pin System Memory Suppo
ملخص المحتوى في الصفحة رقم 16
3. H/W SETUP Layout Contents 3. HARDWARE SETUP 11) ACHA p. 38 Chassis Intrusion Connector (2 pins) 12) WOL_CON p. 39 Wake-On-LAN Connector (3 pins) 13) WOR p. 39 Wake-On-Ring Connector (2 pins) 14) LCDTV p. 40 LCD-TV Headers (18-1 pins/18 pins) 15) USB2 p. 40 USB Headers (5-1 pins) 16) ATXPWR p. 41 ATX Power Supply Connector (20 pins) 17) PWRLED (PANEL) p. 42 System Power LED Lead (3-1 pins) 18) KEYLOCK (PANEL) p. 42 Keyboard Lock Switch Lead (2 pins) 19) SPEAKER (PANEL) p. 42 System Warning Spe
ملخص المحتوى في الصفحة رقم 17
3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: • Check Motherboard Settings • Install Memory Modules • Install the Central Processing Unit (CPU) • Install Expansion Cards • Connect Ribbon Cables, Panel Wires, and Power Supply 3.4 Motherboard Settings WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some
ملخص المحتوى في الصفحة رقم 18
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP Motherboard Feature Settings The motherboard’s onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch’s position. The example below shows all the switches in the OFF position. DSW ON OFF ® 1. Frequency Selection TUSL2-M 2. Frequency Selection 3. Frequency Selection 4. Frequency Selection 5. Frequency Selection. TUSL2-M DIP Switches 1) JumperFree™ Mode (JEN) This jump
ملخص المحتوى في الصفحة رقم 19
3. HARDWARE SETUP 2) USB Device Wake Up (USBPWR1,USBPWR2) These allow you to disable or enable the USB device wake up function. Set these jumpers to Enable if you wish to use your USB devices to wake up your computer. This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX powe
ملخص المحتوى في الصفحة رقم 20
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 4) Onboard Audio CODEC Setting (AUD_EN1) (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jumpers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot later in this section). If using a PCI audio expansion card, Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must also
