Addonics Technologies RT54S2HMEU دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ADDONICS TECHNOLOGIES
Model: RT54S2HMEU

I. Installing drive into the RAID Tower V III. Power on/off control

Turn on the power to the RAID Tower Mini by pressing the power
button on the front. The power LED light should lit indicating the power

is on.
Step 1
Mount 2.5” SATA hard disk drivs into the
drive tray and slide the tray into the drive
bay.

Step 2
Using 3.5” SATA hard disk drive, slide the
drive into the drive bay. Close the front
panel and using the key provided, t

ملخص المحتوى في الصفحة رقم 2

ADDONICS TECHNOLOGIES Model: RT54S2HMEU 4. While holding the RAID setting button, turn on the HPM and SATA hard drives and continue to hold button for at least 5 seconds. Note: The onboard LED's for the eSATA and USB will start blinking while holding down the raid setting button. Once the raid setting button is released, the PM Health LED will blink 4-6 times. If the PM Health LED stops blinking, the raid set is set correctly. If the PM Health LED lights up as solid