Seagate ST3320620A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Computer
Motherboard
Attaching cables and mounting the drive
1. Attach one end of the drive interface cable to the interface connector on
your computer’s motherboard (see your computer manual for connector
locations).
Note. When configuring two PATA devices on
Barracuda 7200.10 PATA Installation Guide
the same cable, both must use Cable
Select or both must use Master/Slave
ST3750840A, ST3750640A, ST3500830A, ST3500630A,
Master
jumper settings. If you are using a standard
ST3400820A, ST3

ملخص المحتوى في الصفحة رقم 2

5. Why won’t the drive format to full capacity? Verify that your BIOS has Installing the drive in Windows XP or Windows 2000 systems TM autodetect and LBA mode enabled. Otherwise, you may need to use DiscWizard , available exclusively from Seagate®, provides you with cus- DiskWizard to achieve the full capacity of your drive. Download the latest tomized installation instructions for your hard drive. You can get this free disc version from www.seagate.com or find it on your CD. Additional informa