ملخص المحتوى في الصفحة رقم 1
Product Manual
Barracuda 7200.11 Serial ATA
ST31000340AS
ST31000640AS
ST3750330AS
ST3750630AS
ST3500320AS
ST3500620AS
ST3500820AS
100452348
Rev. C
January 2008
ملخص المحتوى في الصفحة رقم 2
Revision history Revision Date Sheets affected or comments Rev. A 08/30/07 Initial release. Rev. B 11/12/07 4-7, 9, 11, 15 & 21. Rev. C 01/18/08 2, 4, 6, 9 and 10. (weight change, SATA references updates, and start current update) Copyright © 2007-2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100452348, Rev. C, January 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or othe
ملخص المحتوى في الصفحة رقم 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
ii Barracuda 7200.11 Serial ATA Product Manual, Rev. C
ملخص المحتوى في الصفحة رقم 5
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 3. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 4. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.11 Serial ATA model drives: ST31000340AS ST3750330AS ST3500320AS ST31000640AS ST3750630AS ST3500620AS ST3500820AS These drives provide the following key features: � 7,200 RPM spindle speed. � High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). � Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML tech
ملخص المحتوى في الصفحة رقم 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: � Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. � Thinner and more flexible cabling for improved enclosure airflow and ease of installation. � Scalability to higher performance levels. In addition, Serial ATA makes the transition f
ملخص المحتوى في الصفحة رقم 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31000340AS ST3750330AS ST3500320AS ST31000640AS ST3750630AS ST3500620AS ST3500820AS Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or
ملخص المحتوى في الصفحة رقم 10
Table 1: Drive specifications summary for 1000 and 750 Gbyte models Drive specification ST31000340AS ST31000640AS ST3750330AS ST3750630AS Formatted capacity (512 bytes/sector)* 1000 Gbytes 750 Gbytes Guaranteed sectors 1,953,525,168 1,465,149,168 Heads 8 6 Discs 4 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Spindle speed 7,200 RPM Int
ملخص المحتوى في الصفحة رقم 11
Drive specification ST31000340AS ST31000640AS ST3750330AS ST3750630AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.9 bels (typical) 3.1 bels (max) Performance Seek 3.2 bels (typical) 33 bels (max) Quiet Seek 3.1 bels (typical) 3.2 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Fail
ملخص المحتوى في الصفحة رقم 12
Table 2: Drive specifications summary for 500 Gbyte models Drive specification ST3500320AS ST3500620AS ST3500820AS Formatted capacity (512 bytes/sector)* 500 Gbytes Guaranteed sectors 976,773,168 Heads 4 Discs 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1287 Mbits/sec max Sustained d
ملخص المحتوى في الصفحة رقم 13
Drive specification ST3500320AS ST3500620AS ST3500820AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.7 bels (typical) 2.9 bels (max) Performance Seek 3.1 bels (typical) 3.2 bels (max) Quiet Seek 3.0 bels (typical) 3.1 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR
ملخص المحتوى في الصفحة رقم 14
2.1 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors ST31000340AS 1000 Gbytes 1,953,525,168 512 ST31000640AS ST3750330AS 750 Gbytes 1,465,149,168 512 ST3750630AS ST3500320AS ST3500620AS 500 Gbytes 976,773,168 512 ST3500820AS *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.1.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are
ملخص المحتوى في الصفحة رقم 15
2.4 Physical characteristics Maximum height (1000-500 GB models) 26.1 mm (1.028 inches) Maximum width 101.6 mm (4.000 +/- 0.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 1000 GB models 677 grams (1.493 lbs) 750 GB models 633 grams (1.396 lbs) 500 GB models 543 grams (1.199 lbs) Cache buffer ST31000340AS, ST3750330AS and ST3500320AS 32 Mbytes (32,768 kbytes) ST31000640AS, ST3750630AS and ST3500620AS 16 Mbytes (16,384 kbytes) ST3500820AS 8 Mbytes (8,192 kbytes) 2.5 Seek tim
ملخص المحتوى في الصفحة رقم 16
2.7 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 20. 2.7.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
ملخص المحتوى في الصفحة رقم 17
2.7.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile Barracuda 7200.11 Serial ATA Product Manual, Rev. C 11
ملخص المحتوى في الصفحة رقم 18
2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. � Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. � Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equival
ملخص المحتوى في الصفحة رقم 19
2.8 Environmental specifications 2.8.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions. Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Operating: 0° to 60°C (32° to 140°F) Nonoperating: –40° to 70°C (–40° to 158°F) 2.8.2 Temperature gradient Ope
ملخص المحتوى في الصفحة رقم 20
2.8.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. 2.8.6.1 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below. 2–22 Hz 0.25 Gs (Limited displacement) 22–350 Hz 0.50 Gs 350–500 Hz 0.25 Gs 2.8.6.2 Nonoperating vibration The maximum nonop
