Seagate NL35 Series دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation instructions
1. Mount the drive in the host system carrier or tray
Most Fibre Channel host systems (including enclosures) provide a way to
insert the drive using a carrier or tray which allows the drive to be hot-
plugged into the system’s Fibre Channel 40-pin single connector attach-
ment (FC-SCA).
NL35 Series FC Installation Guide
ST3500071FC, ST3400071FC Mount the drive to the carrier or tray provided by the host system using four
6-32 UNC screws. Do not over-tighten or force th

ملخص المحتوى في الصفحة رقم 2

Drive startup options Seagate support services The drive’s motor will start spinning the discs based on the status of two sig- For online information about Seagate products, visit www.seagate.com or nals set by the host adapter. These two signals are called Start_1 and e-mail your disc questions to DiscSupport@Seagate.com. Start_2. There are four options as described below. If you need help installing your drive, consult your dealer first. If you need Option Start_2 Start_1 Motor spin function a