ملخص المحتوى في الصفحة رقم 1
Product Manual
Barracuda 7200.11 Serial ATA
ST31500341AS
ST31000333AS
ST3640323AS
ST3640623AS
ST3320613AS
ST3320813AS
ST3160813AS
100507013
Rev. C
August 2008
ملخص المحتوى في الصفحة رقم 2
Revision history Revision Date Sheets affected or comments Rev A 06/17/08 Initial release Rev. B 06/25/08 4 and 6. Rev. C (Draft 1) 07/15/08 fc, 1, 3-6, 8-11, 13-15, 17, 21,25-26, 28 and 30. Copyright © 2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100507013, Rev. C, August 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, SeaTools and SeaTDD are
ملخص المحتوى في الصفحة رقم 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
ii Barracuda 7200.11 Serial ATA Product Manual, Rev. C
ملخص المحتوى في الصفحة رقم 5
List of Figures Figure 1. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 3. Mounting dimensions (1500, 1000 and 640 GB models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Figure 4. Mounting dimensions (320 and 160 GB models) . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.11 Serial ATA model drives: ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML tech
ملخص المحتوى في الصفحة رقم 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
ملخص المحتوى في الصفحة رقم 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or
ملخص المحتوى في الصفحة رقم 10
Table 1: Drive specifications summary for 1500 and 1000 Gbyte models Drive specification ST31500341AS ST31000333AS Formatted capacity (512 bytes/sector)* 1500 Gbytes 1000 Gbytes Guaranteed sectors 2,930,277,168 1,953,525,168 Heads 8 6 Discs 4 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1462 kbits/in max 1300 kbits/in max Track density 190 ktracks/in avg 182 ktracks/in avg 2 2 Areal density 277 Gbits/in avg 228 Gbits/
ملخص المحتوى في الصفحة رقم 11
Drive specification ST31500341AS ST31000333AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.6 bels (typical) 2.5 bels (typical) 2.8 bels (max) 2.7 bels (max) Performance Seek 3.0 bels (typical) 2.9 bels (typical) 3.2 bels (max) 3.1 bels (max) Quiet Seek 2.7 bels (typical) 2.9 bels (max) 14 Nonrecoverable r
ملخص المحتوى في الصفحة رقم 12
Table 2: Drive specifications summary for 640 Gbyte models Drive specification ST3640323AS ST3640623AS Formatted capacity (512 bytes/sector)* 640 Gbytes Guaranteed sectors 1,250,263,728 Heads 4 Discs 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1250 kbits/in max Track density 190 ktracks/in avg 2 Areal density 219 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1460 Mbits/sec max Sustained data transf
ملخص المحتوى في الصفحة رقم 13
Drive specification ST3640323AS ST3640623AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.6 bels (typical) 2.8 bels (max) Performance Seek 3.0 bels (typical) 3.2 bels (max) Quiet Seek 2.7 bels (typical) 2.9 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warr
ملخص المحتوى في الصفحة رقم 14
Table 3: Drive specifications summary for 320 and 160 Gbyte models Drive specification ST3320613AS ST3320813AS ST3160813AS Formatted capacity (512 bytes/sector)* 320 Gbytes 160 Gbytes Guaranteed sectors 625,142,448 312,581,808 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1250 kbits/in max Track density 182 ktracks/in avg 2 Areal density 219 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer ra
ملخص المحتوى في الصفحة رقم 15
Drive specification ST3320613AS ST3320813AS ST3160813AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.3 bels (typical) 2.5 bels (max) Performance and Quiet Seek 2.6 bels (typical) 2.8 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty 5 years on distribution
ملخص المحتوى في الصفحة رقم 16
2.1 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors ST31500341AS 1500 Gbytes 2,930,277,168 512 ST31000333AS 1000 Gbytes 1,953,525,168 512 ST3640323AS 640 Gbytes 1,250,263,728 512 ST3640623AS ST3320613AS 320 Gbytes 625,142,448 512 ST3320813AS ST3160813AS 160 Gbytes 312,581,808 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.1.1 LBA mode When addr
ملخص المحتوى في الصفحة رقم 17
2.4 Physical characteristics Maximum height 1500, 1000 and 640 GB models 26.1 mm (1.028 inches) 320 and 160 GB models 20.17 mm (0.794 inches) Maximum width 101.6 mm (4.000 +/- 0.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 1500 GB models 720 grams (1.587 lbs) 1000 GB models 677 grams (1.493 lbs) 640 GB models 543 grams (1.199 lbs) 320 GB models 405 grams (0.893 lbs) 160 GB models 390 grams (0.860 lbs) Cache buffer ST31500341AS, ST31000333AS and ST3640323AS 32 Mbytes (32
ملخص المحتوى في الصفحة رقم 18
2.6 Start/stop times 1500 GB 1000 GB 640 GB 320 & 160 GB Models Models Models Models Power-on to Ready (typ / max sec) 12 / 20 9 / 16 — Power-on to Ready (typ / max sec) (2.0 Amp Code Option) — 14 / 20 6 / 9 Standby to Ready (typ / max sec) 12 / 20 9 / 16 6 / 9 Ready to spindle stop (typ / max sec) 10 / 20 6 / 10 2.7 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 2 on page 22. 2.7.1 Power consumption Power requirements for the dr
ملخص المحتوى في الصفحة رقم 19
Table 4: DC power requirements Power dissipation (4-disc values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup — — 2.8 (peak) Idle* 8.30 0.330 0.530 Idle* (with offline activity) 8.30 0.330 0.530 Operating (40% r/w, 40% seek, 20% inop.) 10.80 0.700 0.610 Seeking (random, 20% idle) 10.10 0.430 0.663 Standby 0.90 0.130 0.021 Sleep 0.90 0.130 0.021 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic
ملخص المحتوى في الصفحة رقم 20
2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equival
