ملخص المحتوى في الصفحة رقم 1
Product Manual
Barracuda 7200.8 PATA
ST3400832A
ST3400632A
ST3300831A
ST3300631A
ST3250823A
ST3250623A
ST3200826A
100323825
Rev. F
August 2007
ملخص المحتوى في الصفحة رقم 2
©2006-2007, Seagate Technology LLC All rights reserved. Publication number: 100323825, Rev. F August 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property
ملخص المحتوى في الصفحة رقم 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
ii Barracuda 7200.8 PATA Product Manual, Rev. F
ملخص المحتوى في الصفحة رقم 5
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 3. Breather filter hole location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 4. Master/slave jumper settings . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 6
iv Barracuda 7200.8 PATA Product Manual, Rev. F
ملخص المحتوى في الصفحة رقم 7
1.0 Introduction ® This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.8 PATA model drives: Barracuda 7200.8 PATA � ST3400832A � ST3400632A � ST3300831A � ST3300631A � ST3250823A � ST3250623A � ST3200826A These drives provide the following key features: � 7,200-RPM spindle speed � 8-Mbyte buffer on: ST3400832A, ST3300831A, ST3250823A and ST3200826A. � 16-Mbyte buffer on: ST3400632A, ST3300631A, and ST3250623A � High instantaneo
ملخص المحتوى في الصفحة رقم 8
2 Barracuda 7200.8 PATA Product Manual, Rev. F
ملخص المحتوى في الصفحة رقم 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate ST3400832A, ST3400632A, ST3300831A, ST3300631A, ST3250823A, ST3250623A, and ST3200826A model drives. 2.1 Specification summary table The specifications listed in tables 1, 2, and 3 are for quick reference. For details on specification measurement or definition, see t
ملخص المحتوى في الصفحة رقم 10
Table 1: Drive specifications for 400 Gbyte models Drive specification ST3400832A ST3400632A Formatted Gbytes (512 bytes/sector)* 400 400 Guaranteed sectors 781,422,768 781,422,768 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, BPI 763,000 (bits/in max) Track density, TPI 120,000 (tracks/in avg.) Areal density, 91,560 2 (Mbits/in avg) Spindle speed (RPM) 7,200 Internal data transfer rate (Mbytes/sec max) 95 Sustained dat
ملخص المحتوى في الصفحة رقم 11
Drive specification ST3400832A ST3400632A Altitude, nonoperating –60.96 m to 12,192 m (below mean sea level, max) (–200 ft. to 40,000+ ft.) Operational Shock (Gs max at 2 msec) 63 Non-Operational Shock (Gs max at 2 msec) 300 Gs Vibration, operating 5–22 Hz: Limited displacement 23–350 Hz: 0.5 G acceleration Vibration, nonoperating 5–22 Hz: Limited displacement 23–350 Hz: 5.0 Gs Drive acoustics, sound power (bels) Idle** 2.8 (typical) 3.4 (max) Performance seek 3.7 (typical) 3.9 (max) 14 Nonrec
ملخص المحتوى في الصفحة رقم 12
Table 2: Drive specifications for 300 Gbyte models Drive specification ST3300831A ST3300631A Formatted Gbytes (512 bytes/sector)* 300 300 Guaranteed sectors 586,072,368 586,072,368 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, BPI 763,000 (bits/in max) Track density, TPI 120,000 (tracks/in avg.) Areal density, 91,560 2 (Mbits/in avg) Spindle speed (RPM) 7,200 Internal data transfer rate (Mbytes/sec max) 95 Sustained dat
ملخص المحتوى في الصفحة رقم 13
Drive specification ST3300831A ST3300631A Altitude, nonoperating –60.96 m to 12,192 m (below mean sea level, max) (–200 ft. to 40,000+ ft.) Operational Shock (Gs max at 2 msec) 63 Non-Operational Shock (Gs max at 2 msec) 300 Gs Vibration, operating 5–22 Hz: Limited displacement 23–350 Hz: 0.5 G acceleration Vibration, nonoperating 5–22 Hz: Limited displacement 23–350 Hz: 5.0 Gs Drive acoustics, sound power (bels) Idle** 2.8 (typical) 3.4 (max) Performance seek 3.7 (typical) 3.9 (max) 14 Nonrec
ملخص المحتوى في الصفحة رقم 14
Table 3: Drive specifications for 250 and 200 Gbyte models Drive specification ST3250823A ST3250623A ST3200826A Formatted Gbytes (512 bytes/sector)* 250 250 200 Guaranteed sectors 488,397,168 488,397,168 390,721,968 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, BPI 763,000 (bits/in max) Track density, TPI 120,000 (tracks/in avg.) Areal density, 91,560 2 (Mbits/in avg) Spindle speed (RPM) 7,200 Internal data transfer rat
ملخص المحتوى في الصفحة رقم 15
Drive specification ST3250823A ST3250623A ST3200826A Altitude, operating –60.96 m to 3,048 m (–200 ft. to 10,000+ ft.) Altitude, nonoperating –60.96 m to 12,192 m (below mean sea level, max) (–200 ft. to 40,000+ ft.) Operational Shock (Gs max at 2 msec) 63 Non-Operational Shock (Gs max at 2 msec) 300 Gs Vibration, operating 5–22 Hz: Limited displacement 23–350 Hz: 0.5 G acceleration Vibration, nonoperating 5–22 Hz: Limited displacement 23–350 Hz: 5.0 Gs Drive acoustics, sound power (bels) Idle*
ملخص المحتوى في الصفحة رقم 16
2.2 Formatted capacity Formatted Guaranteed Model capacity sectors Bytes per sector ST3400832A 400 Gbytes 781,422,768 512 ST3400632A 400 Gbytes 781,422,768 512 ST3300831A 300 Gbytes 586,072,368 512 ST3300631A 300 Gbytes 586,072,368 512 ST3250823A 250 Gbytes 488,397,168 512 ST3250623A 250 Gbytes 488,397,168 512 ST3200826A 200 Gbytes 390,721,968 512 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guara
ملخص المحتوى في الصفحة رقم 17
2.5 Physical characteristics Drive specification Maximum height (mm) 26.11 (inches) 1.028 Maximum width (mm) 101.85 (inches) 4.010 Maximum length (mm) 146.99 (inches) 5.787 Max weight (grams) 635 (pounds) 1.39 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: � Track-to-track seek time is an average of all possible single-track seeks in both direct
ملخص المحتوى في الصفحة رقم 18
2.8 Power specifications The drive receives DC power (+5V or +12V) through a four-pin standard drive power connector. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 12. Typical power measurements are based on an average of drives tested, under nominal conditions, using +5.0V and +12.0V input voltage at 25°C ambi- ent temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
ملخص المحتوى في الصفحة رقم 19
2.8.1.1 Typical current profile Figure 1 Typical 5V startup and operation current profile Figure 2 Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. � Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. � Us
ملخص المحتوى في الصفحة رقم 20
2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power mode Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled � Active mode The drive is in Active mode during the read/write and seek operations. �
