ملخص المحتوى في الصفحة رقم 1
Product Manual
DiamondMax 22 Serial ATA
STM31000334AS
STM3320614AS
STM3160813AS
100544218
Rev. A
November 2008
ملخص المحتوى في الصفحة رقم 2
Revision history Revision Date Sheets affected or comments Rev. A 11/04/08 Initial release. Copyright © 2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100544218, Rev. A November 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. DiamondMax, MaxBlast, Maxtor and the Maxtor logo are either trademarks or registered trademarks of Seagate Technology LLC or one of
ملخص المحتوى في الصفحة رقم 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
ii DiamondMax 22 Serial ATA Product Manual, Rev. A
ملخص المحتوى في الصفحة رقم 5
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Figure 3. Serial ATA connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Figure 4. Attaching SATA c
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® DiamondMax 22 Serial ATA model drives: STM31000334AS STM3320614AS STM3160813AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for increased areal density. • State-of-t
ملخص المحتوى في الصفحة رقم 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
ملخص المحتوى في الصفحة رقم 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: STM31000334AS STM3320614AS STM3160813AS Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or definition, see the appropriate section of thi
ملخص المحتوى في الصفحة رقم 10
Table 1: Drive specifications summary for 1000 Gbyte models Drive specification STM31000334AS Formatted capacity (512 bytes/sector)* 1000 Gbytes Guaranteed sectors 1,953,525,168 Heads 6 Discs 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1300kbits/in max Track density 182 ktracks/in avg 2 Areal density 228 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1520 Mbits/sec max Sustained data transfer rate O
ملخص المحتوى في الصفحة رقم 11
Drive specification STM31000334AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.5 bels (typical) 2.7 bels (max) Performance Seek 2.9 bels (typical) 3.1 bels (max) Quiet Seek 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty To determine the warranty for a specific
ملخص المحتوى في الصفحة رقم 12
Table 2: Drive specifications summary for 320 and 160 Gbyte models Drive specification STM3320614AS STM3160813AS Formatted capacity (512 bytes/sector)* 320 Gbytes 160 Gbytes Guaranteed sectors 625,142,448 312,581,808 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1250 kbits/in max Track density 182 ktracks/in avg 2 Areal density 219 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1460 Mb
ملخص المحتوى في الصفحة رقم 13
Drive specification STM3320614AS STM3160813AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.3 bels (typical) 2.5 bels (max) Performance and Quiet Seek 2.6 bels (typical) 2.8 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty To determine the warranty for a sp
ملخص المحتوى في الصفحة رقم 14
2.1 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors STM31000334AS 1000 Gbytes 1,953,525,168 512 STM3320614AS 320 Gbytes 625,142,448 512 STM3160813AS 160 Gbytes 312,581,808 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.1.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is
ملخص المحتوى في الصفحة رقم 15
2.4 Physical characteristics Maximum height (1000 GB models) 26.1 mm (1.028 inches) Maximum height (320-160 GB models) 20.17 mm (0.794 inches) Maximum width 101.6 mm (4.000 +/- 0.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 1000 GB models 630 grams (1.389 lbs) 320 GB models 405 grams (0.893 lbs) 160 GB models 390 grams (0.860 lbs) Cache buffer STM31000334AS 32 Mbytes (32,768 kbytes) STM3320614AS 16 Mbytes (16,384 kbytes) STM3160813AS 8 Mbytes (8,192 kbytes) 2.5 Seek time
ملخص المحتوى في الصفحة رقم 16
2.6 Start/stop times 1000 GB Models 320 and 160 GB Models Power-on to Ready (sec) 20 (max) 9 (max) Standby to Ready (sec) 15 (max) 9 (max) Ready to spindle stop (sec) 10 (max) 2.7 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 22. 2.7.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, usin
ملخص المحتوى في الصفحة رقم 17
Table 3: DC power requirements Power dissipation (3-disc values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup — — 3.0 (peak) Idle* 7.96 0.320 0.530 Idle* (with offline activity) 9.29 0.610 0.520 Operating (40% r/w, 40% seek, 20% inop.) 11.16 0.600 0.680 Seeking (random, 20% idle) 10.42 0.500 0.660 Standby 0.99 0.150 0.020 Sleep 0.99 0.150 0.020 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic
ملخص المحتوى في الصفحة رقم 18
2.7.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile 12 DiamondMax 22 Serial ATA Product Manual, Rev. A
ملخص المحتوى في الصفحة رقم 19
2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equival
ملخص المحتوى في الصفحة رقم 20
2.8 Environmental specifications 2.8.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions. Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Operating: 0° to 60°C (32° to 140°F) Nonoperating: –40° to 70°C (–40° to 158°F) 2.8.2 Temperature gradient Ope
