Lindy 42907 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION OPERATION (ENGLISH)




Power Requirement
ENGLISH

Remove the plastic end cover (with the USB connection)
Do not connect this enclosure to a non self-powered

from the housing. If present, set the jumper on your hard
USB hub or port - they cannot supply enough power to

drive to the MASTER setting. Attach the drive to the 44-way
operate the hard drive properly!
connector as illustrated below. Slide the drive into the
Modern 2.5” drives with lo

ملخص المحتوى في الصفحة رقم 2

TREIBERINSTALLATION Technical Data Installation du disque dur Moderne Betriebssysteme wie Windows XP, ME, 2000 (mit For 2.5” hard drives of up to 9.5mm in height only! aktuellen USB- Treibern) haben bereits alle notwendigen Si vous installez un nouveau disque dur et qu’il n’est pas Interface: USB 2.0 to IDE ATA/133 Treiber an Board. Sollte das externe Laufwerk hier bereits reconnu par le système, il est nécessaire de le partitionner Enclosure dimensions: 12 x 7.5 x 1.3 cm als USB 2.