Barracuda Networks ST36810A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Computer
Motherboard
• Master or single-drive: The drive is shipped configured for a master
or a single-drive with a jumper set on pins 7 and 8.
®
• Drive is slave: To configure the drive as a slave, or second drive on
Barracuda ATA Family Installation Guide
the cable, remove all the jumpers.
ST36810A, ST310220A, ST313620A, ST320430A, ST328040A
• Master with non-ATA compatible slave: Use this setting if the slave
Publication number: 21200154-001, Rev. B
drive is not recognized. Configure the mas

ملخص المحتوى في الصفحة رقم 2

4. Does Scandisk find the drive defect-free? Scandisk is a utility Preparing the Drive with Disk Manager located on your Windows startup diskette that scans the drive for de- Installing a Single Drive fects. If defects are detected, this may be an indication of a problem drive. If you are installing a single drive, we recommend using Disk Manager to automatically partition and format your drive. This software is stored 5. Why won’t the drive format to full capacity? Verify that your BIOS on the