Addonics Technologies AEDMDISU2 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

User Guide
Internal IDE/SATA/USB
T E C H N O L O G I E S
DigiDrive (AEDMDISU2)
4-Pin Floppy
Power Port
SATA 1.5Gbs
Mode Jumper JP4 Data Port
(Close or Open)
Pin 1
USB 5-Pin Header
Drive Activity LED
4-Pin Floppy Power Connector
4 slots - CF, SD, MMC, MiniSD, SM,
xD, MS, MS Duo and MS Pro Duo
SATA Port 2 (Slave)
SATA Port 1 (Master)
Standard 40-Pin IDE Interface for Mounting
Directly onto Motherboard IDE Channel
Mode Jumper (JP4):
Note: Only applies on SATA connection
The internal SATA / USB Digi

ملخص المحتوى في الصفحة رقم 2

I. Setting up the device in SATA mode a. Connect a 4-pin floppy power cable from PC to the internal SATA / USB DigiDrive. b. Attach SATA cable from internal SATA / USB DigiDrive to the PC SATA port. The tables show drive icon and media detection behavior basing on the mode switch setting and the type of SATA port the internal SATA / USB DigiDrive is connected to. Open mode – force flash media to become Fixed disk type Drive Icon Media Detection Flash media is automatically Icon appears only