Black Box LPDG705A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

LPDG705A
LPDG705AE
LPDG708A
LPDG708AE
5-/8-Port 10/100/Gigabit Switch with 1 PoE PD Port
Expand the number of Gigabit Ethernet ports
on your network without the need for a power
outlet.

Includes a built-in IEEE 802.3af Power Device (PD).
Unit is palm-sized with metal case.
Auto-negotiates port speed.
Includes auto-MDI/MDI-X function for every port.

ملخص المحتوى في الصفحة رقم 2

5-/8-Port 10-/100-/Gigabit Switch with 1 PoE PD port Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter-ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the spec

ملخص المحتوى في الصفحة رقم 3

Chapter 1: Introduction Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. 1. Introduction These switches provide (5) or (8) 10-/100-/1000-Mbps ports. They were designed for easy installation and high performance in environments where traffic on the network and the number of users increases continuously. Bot

ملخص المحتوى في الصفحة رقم 4

5-/8-Port 10-/100-/Gigabit Switch with 1 PoE PD port 4. Front & Rear Panel Front Panel Figure 4-1. Front panel of the LPDG708A. NOTE: The front panel of the LPDG705A is similar to the LPDG708A, except that is has six LEDs (1 power, 5 Link/Act) instead of eight LEDs. LED 5 on LPDG705A and LED 8 on the LPDG708A indicate the Link/Act status of the PoE port. LED Indicators on the switch LED Status Description Power On Power is on. Off Power is off. LINK/ACT On Port is for c

ملخص المحتوى في الصفحة رقم 5

Chapter 5: Connection 5. Connection TP Port and Cable Installation: 1. The switch’s TP ports support MDI-/MDI-X auto-crossover, so you can use either straight through or cross over cables. 2. Use CAT5 or higher grade RJ-45 TP cable for 10/100 applications and CAT5e grade RJ-45 TP cable or above for gigabit Ethernet applications, to connect a TP port of the switch to an Ethernet device such as a workstation or a server. 3. Repeat the above steps, as needed, for each RJ-45 port to

ملخص المحتوى في الصفحة رقم 6

5-/8-Port 10-/100-/Gigabit Switch with 1 PoE PD port 6. Technical Specifications IEEE 802.3af IEEE 802.3 10BaseT Standards IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow control Number of Ports: LPDG705A: (5) 10-/100-/1000BASE-T(X) with 1 PD (PoE) Port LPDG708A: (8) 10-/100-/1000BASE-T(X) with 1 PD (PoE) Port Features MAC Address: 2K Buffer Memory: 1M bits Method: Store and Forward 1000-Mbps port : 1,488,000 pps Filtering/ 100-Mbps port : 148,800pps Fo

ملخص المحتوى في الصفحة رقم 7

LPDG705A, rev. 3 ______________________________________________________________________