ملخص المحتوى في الصفحة رقم 1
User’s Guide
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Congratulations on your new iPhone ® Bluetooth Headset. Use the headset to talk hands-free on your iPhone. Follow these instructions to get started. Pair the Headset with iPhone 1 Connect the included iPhone Dual Dock to a USB 2.0 port on your computer (not on the keyboard). 2 Connect iPhone and the headset to the dock. The headset pairs with iPhone automatically. Dock The fi rst time you connect the headset, let it charge for about an hour until the status light on the headset turns fro
ملخص المحتوى في الصفحة رقم 4
You can also pair the headset with iPhone and charge the headset using the included iPhone Travel Cable. Connect the cable to your computer, then connect the headset and iPhone to the cable. Cable 4
ملخص المحتوى في الصفحة رقم 5
Make or Answer a Call 1 Place the headset in either ear with the microphone pointed towards your mouth. Microphone Note: Placing the included foam pad over the speaker may provide a more comfortable fi t. 2 Make a call on iPhone, or press the button on top of the headset to answer an incoming call. Button Status light If you answer an incoming call by tapping the iPhone touchscreen, audio is routed through iPhone. 3 When you fi nish, press the button to end the call. Adjust the Volume m U
ملخص المحتوى في الصفحة رقم 6
What Else You Can Do To Do this Answer incoming call Press button. End current call Press button. Decline incoming call Press button for about one second, until you hear a beep. Switch to incoming or Press button. on-hold call and put current call on hold Switch to incoming or Press button for about one on-hold call and end second, until you hear a current call beep. Check whether Press button. headset is turned on If headset is on, status light blinks green and headset beeps. Turn headse
ملخص المحتوى في الصفحة رقم 7
Switch from the Headset to iPhone To stop using the headset and hear calls through iPhone instead, you can either: m Turn the headset o ∂ . You can turn it on at any time to use it with iPhone again. m During a call, tap Audio Source on iPhone and choose iPhone or Speaker (for speakerphone). Reconnect the Headset to iPhone You can tell that calls will be routed through the headset if the Bluetooth icon (◊) in the iPhone status bar is blue or white (depending on which application you’re u
ملخص المحتوى في الصفحة رقم 8
Charge the Headset When the headset doesn’t have much charge left, a long beep sounds every ten seconds. To charge the headset: 1 Connect the included cable or dock to your computer. Or connect it to the Apple USB Power Adapter that comes with iPhone and connect the adapter to a standard power outlet. 2 Connect the headset to the cable or dock. A fully depleted headset recharges in about an hour and a half. Status light amber = Charging Status light green = Completely charged 3 Remove th
ملخص المحتوى في الصفحة رقم 9
Use the Headset with Another Phone or Device You can use the headset with some other Bluetooth devices, such as another phone. And you can pair the headset to iPhone manually, if you don’t have the cable or dock handy. You can also pair the headset with some Bluetooth enabled computers and talk to friends using an audio- enabled instant messaging application like iChat. To set the headset to be discoverable, so the other device can sense it: 1 Turn the headset o ∂ . 2 Press and hold the
ملخص المحتوى في الصفحة رقم 10
To pair the headset with a Bluetooth enabled Mac using Mac OS X version 10.4.9 or later: 1 Open System Preferences and click Bluetooth. 2 Click Devices and click Set Up New Device. Then choose Headset. 3 Set the headset to be discoverable. 4 Follow the onscreen instructions. When prompted for a passkey, enter 0000. To use the headset with iChat: 1 Pair the headset with your Mac. 2 In iChat, choose iChat > Preferences and click Video. 3 Choose iPhone Bluetooth Headset from the Micropho
ملخص المحتوى في الصفحة رقم 11
Tips and Troubleshooting If the headset isn’t responding or working correctly, try these steps in order until it starts working. m Make sure the headset is on. Press the button. If the status light doesn’t blink green, press and hold the button for about three seconds, until you see the status light blink green or hear four rising tones. m Make sure iPhone is turned on. m Make sure the headset and iPhone are charged. m During a call, make sure iPhone is set to play sound through the hea
ملخص المحتوى في الصفحة رقم 12
Read all safety information below and ± operating instructions before using the iPhone Bluetooth Headset to avoid injury. Important Safety Information WARNING: Failure to follow these safety instructions could result in fi re, electric shock, or other injury or damage. Handling the iPhone Bluetooth Headset Do not drop, disassemble or open, crush, bend or deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the iPhone Bluetooth Headset. Avoiding Water and
ملخص المحتوى في الصفحة رقم 13
Charging the iPhone Bluetooth Headset To charge the iPhone Bluetooth Headset, only use the iPhone Travel Cable or iPhone Dual Dock with an Apple USB Power Adapter or a high-power USB port on another device that is compliant with the USB 2.0 or 1.1 standards, or another Apple-branded product or accessory designed to work with the iPhone Bluetooth Headset. Read all safety instructions for any products and accessories before using with the iPhone Bluetooth Headset. Apple is not responsible
ملخص المحتوى في الصفحة رقم 14
 Avoid turning up the volume to block out noisy surroundings.  Turn the volume down if you can’t hear people speaking near you. Driving Safely Use of the iPhone Bluetooth Headset while driving a vehicle or riding a bicycle is not recommended and is illegal in some areas. Check and obey the laws and regulations on the use of mobile devices like iPhone in the areas where you drive. Be careful and attentive while driving. Choking Hazards The iPhone Bluetooth Headset is small and may pr
ملخص المحتوى في الصفحة رقم 15
Vehicles RF signals may a ∂ ect installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. Electronics Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from the iPhone Bluetooth Headset. Hearing Aids The iPhone Bluetooth Headset may interfere with some hearing aids. If it does, consult the hearing aid
ملخص المحتوى في الصفحة رقم 16
Blasting Areas To avoid interfering with blasting operations, turn o ∂ the iPhone Bluetooth Headset when in a “blasting area” or in areas posted “Turn o ∂ two-way radio.” Obey all signs and instructions. Important Handling Information NOTICE: Failure to follow these handling instructions could result in damage to the iPhone Bluetooth Headset or other property. Using Connectors and Ports Never force a connector into a port. Check for obstructions on the port. If the connector and port do
ملخص المحتوى في الصفحة رقم 17
Disposal and Recycling Information iPhone Bluetooth Headset Disposal and Recycling Your iPhone Bluetooth Headset must be disposed of properly according to local laws and regulations. Because the iPhone Bluetooth Headset contains electronic components and a battery, it must be disposed of separately from household waste. When your iPhone Bluetooth Headset reaches its end of life, contact local authorities to learn about disposal and recycling options, or simply drop it o∂ at your local
ملخص المحتوى في الصفحة رقم 18
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: Changes or modifi cations to this product not authorized by Apple could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC
ملخص المحتوى في الصفحة رقم 19
ملخص المحتوى في الصفحة رقم 20
© 2007 Apple Inc. All rights reserved. Apple, the Apple logo, Mac, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. 034-4161-A Printed in XXXX
