ملخص المحتوى في الصفحة رقم 1
Apple
Multiple Scan 15 AV
Display
User’s Guide
15-inch CRT (13.75-inch diagonal viewable image size)
ملخص المحتوى في الصفحة رقم 2
K Apple Computer, Inc. © 1996 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Your rights to the software are governed by the accompanying software license agreement. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may
ملخص المحتوى في الصفحة رقم 3
Contents Communications regulation information v 1Setting Up 1 Important safety instructions 1 What about electromagnetic emissions? 2 Getting ready to set up 3 Your Multiple Scan 15AV Display at a glance 4 Choosing a good location for your monitor 5 Connecting the monitor’s base 6 Positioning the monitor 7 Do you need a video card? 8 Do you need an adapter? 8 Using more than one monitor 8 Connecting the monitor to your computer 9 C
ملخص المحتوى في الصفحة رقم 4
2Using the Display Software 15 About the Control Strip 15 Working with the Control Strip 16 Changing screen resolution 17 Other things you can do with the Monitors control panel 19 Conserving energy 20 What happens after you turn on the energy-saving feature 21 Using Energy Saver with a screen saver 21 Using ColorSync 22 Configuring the Control Strip 23 Showing and hiding the Control Strip 23 Setting a keyboard command to show and hide the C
ملخص المحتوى في الصفحة رقم 5
Communications regulation information FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. See instructions if interference to radio or television reception is suspected. Radio and television interference The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly—that is, in strict accordance with App
ملخص المحتوى في الصفحة رقم 6
DOC statement DOC Class B Compliance This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications. Observation des normes—Classe B Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur : “Appareils Numé
ملخص المحتوى في الصفحة رقم 7
1 Setting Up The Apple Multiple Scan 15AV Display is a 15-inch color monitor (diagonal viewable image size is 13.75 inches) that supports a variety of resolutions and has a built-in amplifier and stereo speakers for producing sounds and music. This chapter describes important safety information, setting up and connecting the monitor to your computer, and installing the monitor software on your computer. Important safety instructions For your own safety and that of your equipment, always take the
ملخص المحتوى في الصفحة رقم 8
Be sure that you always do the following: m Keep your monitor away from sources of liquids, such as wash basins, bathtubs, shower stalls, and so on. m Don’t remove the cover of the monitor. m Don’t set anything on top of the monitor (such as a book or cup). m Keep the monitor’s vents free from obstruction. m Protect your monitor from dampness or wet weather, such as rain, snow, and so on. m Read all the installation instructions carefully before you plug your monitor into a power source. m Keep
ملخص المحتوى في الصفحة رقم 9
Getting ready to set up As you begin to set up your display system, be sure you have easy access to the following items for your Multiple Scan 15AV Display: Apple Multiple Scan 15AV Display Sound cable Monitor cable Power cord Software User’s guide Note: Your power cord may appear different from the one pictured here. Setting Up 3 I f
ملخص المحتوى في الصفحة رقم 10
Your Multiple Scan 15AV Display at a glance Stereo speakers I Power button f Headphone _ Volume control jack Control panel O Contrast control ¤ Brightness control F Security slot _ Sound input port ™ Monitor cable ≤ Power cord receptacle 4 Chapter 1 _ ≤ F f I
ملخص المحتوى في الصفحة رقم 11
Choosing a good location for your monitor Here are some key factors to consider when determining where to place your monitor: m Be sure that the desk or table can support the monitor’s weight— approximately 30 pounds. m Make sure that the power cord will reach an available AC outlet. m Make sure the monitor cable will reach from the back of the monitor to your computer. The monitor cable should be unobstructed when you swivel and tilt the monitor, so allow at least 6 inches of clearance in the
ملخص المحتوى في الصفحة رقم 12
Connecting the monitor’s base The monitor and base are packaged separately. To connect the monitor’s base, follow these steps: 1Place the monitor on its left side on a table or other firm surface. 2Place the base on its side facing the bottom of the monitor. 3Hook the rear latches into the holes at the rear of the monitor. 4 Insert the front latches into the slots at the front of the monitor. First, hook the rear latches into the holes at the rear of the base. Then, snap the front latches into t
ملخص المحتوى في الصفحة رقم 13
Positioning the monitor Once your monitor is in place, either on top of your computer or next to it on a desk or table, follow these steps: 1Place the monitor so that the screen faces the user. 2 To slide the monitor, lift the front up slightly and push or pull in the direction you want. 3Adjust the viewing angle of the monitor by tilting it up or down and turning it left or right on its stand. Position the monitor so that when you use it, no bright light is behind the monitor or reflected on t
ملخص المحتوى في الصفحة رقم 14
Do you need a video card? To use the Multiple Scan 15AV Display, you need compatible video circuitry built into your computer or a compatible video card installed in your computer. If you are unsure whether your computer has the appropriate built- in video capability, check the technical specifications that came with your computer or check with an Apple-authorized dealer or service provider. If your computer does not have built-in video capability, you need to install a video card (available fr
ملخص المحتوى في الصفحة رقم 15
Connecting the monitor to your computer Follow these steps to connect the Multiple Scan 15AV Display to your computer: IMPORTANT Before you connect any cords or cables, make sure that your computer is turned off and unplugged. WARNING Your monitor is equipped with a three-wire grounding plug— a plug that has a third (grounding) pin. This plug will fit only a grounded AC outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a licensed electrician to repla
ملخص المحتوى في الصفحة رقم 16
2Plug the other end of the power cord into an outlet or power strip. If your computer has an available power socket, you can use a detachable power cord with a recessed end to plug the monitor directly into the computer. You can get this cord from an Apple-authorized dealer or service provider. 3Connect the monitor cable to the monitor port (marked with ™) on the back of the computer. Monitor port icon Monitor cable If you installed a video card in your computer, connect the monitor cable to the
ملخص المحتوى في الصفحة رقم 17
Connecting headphones to your monitor If you wish, you can plug a pair of headphones (or other sound output device) into the Multiple Scan 15AV Display. To plug your headphones into the monitor, follow these steps: 1If your headphones are attached to the sound output port (marked by -) on the back of your computer, unplug them. 2If the sound cable that came with the Multiple Scan 15AV Display is not connected, connect it to the sound output port on the computer and on the monitor. (Both sound ou
ملخص المحتوى في الصفحة رقم 18
Note: If the power light is yellow or amber, one of the following may be the cause: m The computer isn’t turned on. m The monitor’s cable isn’t connected properly to the computer. m The video circuitry or video card in your computer is not compatible with the monitor. Your Macintosh may need a video card or adapter to use the monitor. See “Do You Need a Video Card?” earlier in this chapter. m The computer and monitor are in sleep to conserve energy. See “Conserving Energy” in Chapter 2. To mak
ملخص المحتوى في الصفحة رقم 19
4 Read the Welcome screen and click OK. The Installer screen appears. 5Make sure the disk named in the box is the one on which you want to install the software. If not, click Switch Disk until the correct disk name appears. 6Click the Install button. The Installer takes a few moments to calculate what needs to be done and then begins to copy files. 7When the installation is complete, follow the instructions on the screen. After the installation, the Installer tells you to restart your computer
ملخص المحتوى في الصفحة رقم 20
