ملخص المحتوى في الصفحة رقم 1
COFFEE MACHINE
ZCOF636X
UK
INSTRUCTION BOOK
ملخص المحتوى في الصفحة رقم 2
ENGLISH INSTALLATION AND FOR YOUR PERSONAL MAINTENANCE SAFETY • The appliance should be installed and connected to mains by QUALIFIED PERSONNEL only. Before carrying out any This new appliance is easy to use. work on the appliance always make sure that it However, it is important to read the has been DISCONNECTED from the mains. whole of this booklet before installing • Remove the appliance from the packaging, or using the appliance for the first check it for damage and mak
ملخص المحتوى في الصفحة رقم 3
INDEX INFORMATION FOR THE USER INFORMATION FOR THE INSTALLER DESCRIPTION OF THE COFFEE MACHINE PAGE 3 TECHNICAL SPECIFICATIONS PAGE 12 FIRST USE PAGE 4 INSTALLATION PAGE 12 MAKING COFFEE PAGE 5 WATER SUPPLY PAGE 15 HOT WATER PAGE 6 ELECTRICAL CONNECTION PAGE 16 STEAM PAGE 6 DRAWER
ملخص المحتوى في الصفحة رقم 4
DESCRIPTION OF THE COFFEE MACHINE 1. Steam knob 2. Grinding texture knob 3. On button 4. Coffee button 5. Hot water button 6. Steam button 7. Light button 8. Orange 'ON' indicator light 9. Red 'water temperature' indicator light 10. Green 'coffee' indicator light 11. Green 'water' indicator light 12. Green 'steam' indicator light 13. Green 'light on' indicator light 14. Green 'dispenser' indicator light 15. Filter holder ring nut 16. Steam spout 1
ملخص المحتوى في الصفحة رقم 5
• The texture of ground coffee can however be FIRST USE adjusted using the grinding texture knob (ref.2). Turn the knob clockwise for a finer texture and FILL THE WATER TANK stronger coffee. Turn anticlockwise for a coarser grind and weaker coffee. • Water hardness: - before filling the water tank make sure that the Brita filter is in place (see paragraph "Water PROGRAMMING THE QUANTITY supply"). OF GROUND COFFEE - if the appliance has not been used for a long time it is
ملخص المحتوى في الصفحة رقم 6
light goes out the water has reached the required measure of ground coffee. For 2-cup filters temperature for coffee making. (ref.22) repeat the operation. • Close the steam knob by turnig clockwise (ref.1) • Press the ground coffee with the coffee press and release the hot water button (ref.5). (ref.17) . • Allow any dispensed water to fall into the drip • Place the filter holder (ref.20) on the ring nut tray or a cup and discard. (15) making sure it locks into place: move the handle of
ملخص المحتوى في الصفحة رقم 7
• Once the required quantity of coffee has been • Turn the steam knob (ref.1) anti-clockwise. supplied, press the coffee button a second time to • Press the hot water button (ref.5). Release the stop supply. button when you have the required amount of • Remove cup(s) from the machine. hot water and close the steam knob (ref.1). • Take the filter holder off the ring nut and dispose of the used pod. STEAM TIPS ON HOW TO PREPARE AN • Steam is used to make cappuccino coffee (see E
ملخص المحتوى في الصفحة رقم 8
VIENNESE CAPPUCCINO CAPPUCCINO ICE-CREAM This variation is the result of age-old Austrian Heat 2 cups of espresso coffee, ¾ cup of single tradition. cream and ½ cup sugar in a pan and bring to Prepare a 'long' espresso by letting the machine run boiling point. for longer than usual (30-35 seconds), add hot milk Leave to cool before placing in the freezer for 4-5 followed by whipped cream. Serve in a medium- hours. sized cup (midway between an espresso cup and a Move to the refrigerator
ملخص المحتوى في الصفحة رقم 9
- Pull down the glass retaining ring and glass. • Put the filter holder and the filter in the - Pull out the bulb and replace with one of the dishwasher every 2 months. same characteristics making sure that the glass of the new bulb is not touched by hand. - Carefully wipe the new bulb with a soft cloth. WATER TANK - Refit the glass and glass retaining ring and reconnect the machine to the electricity supply. • If left unused for long periods it is advisable to The bulb is a 20
ملخص المحتوى في الصفحة رقم 10
The plate is located on the external right-hand side * calls to this number may be recorded for training of the machine and is clearly visible when the purposes. machine is opened. GUARANTEE SERVICE AND SPARE PARTS (UK) CONDITIONS (UK) In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your ZANUSSI GUARANTEE CONDITIONS local Zanussi Service Force Centre by We, Zanussi, undertake that if, within 24 months of telephoning:
ملخص المحتوى في الصفحة رقم 11
* Appliances found to be in use within a commercial When calling for repairs during the period of or similar environment, plus those which are the guarantee ofthe appliance, the original invoice subject to rental agreements. or receipt must be shown or sent together with * Products of Zanussi manufacture which are not the appliance to be repaired. marketed by Zanussi. GENERAL CONDITIONS OF GUARANTEE EUROPEAN GUARANTEE 1 The manufacturer guarantees the appliance If you should move to ano
ملخص المحتوى في الصفحة رقم 12
by the manufacturer, at his expense and under his of the appliance, the manufacturer and the responsibility. technical assistance decline all responsibility. 5 All appliances not mentioned under points 3 and 8c Damage such as scratches, knocks or breakage 3a, includingappliances having the same functional of movable or dismountable units which were not characteristics but whose transport is easy, must be notified to the manufacturer at the time of delivery sent to the Technical Assistance o
ملخص المحتوى في الصفحة رقم 13
TECHNICAL SPECIFICATIONS • Width 594 mm • Depth 280 mm • Height 357 mm • Tank capacity 2,5 Iitres • Net weight 17 kg • Gross weight 19 kg • Power supply voltage 230-240 V • Heater power consumption 1000 W • Pump power consumption 50 W • Light bulb power consumption 20 W • Total power consumption 1070W • Working pressure 12 bar • Fuse 13 A INSTALLATION INSTALLING IN MODULAR UNITS This appliance must be installed by a competent person. For
ملخص المحتوى في الصفحة رقم 14
• Warning: - Connect the power supply cable of suitable dimensions before securing the power supply unit. Fig. 2 - Assemble the runners on the sides of the machine (using the screws supplied) as shown in fig.1. - Fasten the telescopic runner supports (RH and LH) using three wood screws (fig.2) and taking care to follow the measurements shown in fig.2. - Make a slot in the bottom of the open compartment following the measurements given in fig.2. - If
ملخص المحتوى في الصفحة رقم 15
Fig. 3 Fig. 4 Fig. 5 • Assemble the telescopic runners of the coffee machine in the supports fixed to the inside of the unit; push the runners in until they reach the limit stop and secure the runners (fig.5). 14
ملخص المحتوى في الصفحة رقم 16
WATER SUPPLY • Take the lid off the water tank (ref.27) and take out the Brita filter. • Take the filter out of the packaging and soak it in cold water for half an hour before fitting it firmly into the hole in the tank (fig.6). • Place the water hose in the relative channel (fig.7) and push it down until it reaches the bottom of the tank (fig.8). • Fill the tank with cold water. • Warning: only fill the tank with cold drinking water only: do not pour milk
ملخص المحتوى في الصفحة رقم 17
ELECTRICAL CONNECTION • Make sure that the electric circuit is suitably earthed. • Connect the power cable supplied to the connector on the back of the appliance, plug the connector into the power supply unit on the back of the post (fig.3) where you will find the terminal board (fig.9) set to operate at a supply voltage of 230V monophase. • Make sure that a circuit breaker is installed in the electrical circuit of the building to disconnect it fro
ملخص المحتوى في الصفحة رقم 18
DRAWER The required dimensions of the compartment for installing the machine with the drawer are given in fig. 10 and 11. Fig.10 Fig.11 17
ملخص المحتوى في الصفحة رقم 19
ملخص المحتوى في الصفحة رقم 20
