ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Woodstock Technical Support ............................................................................ 3 About Your New 12-Speed Drill Press ...................................................................3 Specifications ............................................................................................... 4 Additional Safety Instructions for Drill Presses ........................................................ 8 110V/220V Operation ...............
ملخص المحتوى في الصفحة رقم 4
Headstock Breakdown ................................................................................... 34 Parts List ................................................................................................... 35 Safety Label Placement ................................................................................. 36
ملخص المحتوى في الصفحة رقم 5
We stand behind our machines! In the event that questions arise about your machine, parts are miss- ing, or a defect is found, please contact Woodstock International Technical Support at (360) 734-3482 or send e-mail to: . Our knowledgeable staff will help you troubleshoot prob- lems and send out parts for warranty claims. If you need the latest edition of this manual, you can download it from . If you have comments about this manual, please contact us at:
ملخص المحتوى في الصفحة رقم 6
Approximate Machine Weight ...................................................................... 320 lbs. 3 3 Length/Width/Height ....................................................................34 ⁄4 x 21 x 70 ⁄4" Footprint ..............................................................................................23 x 18" Type ....................................................................... TEFC Capacitor Start Induction 1 Horsepower .............................
ملخص المحتوى في الصفحة رقم 7
A B C C F D G E M1039 headstock controls. H I K J M1039 table controls. Belt Tension Lever Light Switch (110V only) Scale Power Switch Table Height Crank Handle Belt Tension Lock Small Lock Lever Torsion Spring Large Lock Lever Lash Screw Depth Stop -5-
ملخص المحتوى في الصفحة رقم 8
Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is used to alert the user to useful information about proper operation of the equipment, and/or a situation that may cause damage to the machi
ملخص المحتوى في الصفحة رقم 9
DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. Clutter and dark shadows may cause accidents. Undersized cords overheat and lose power. Replace extension cords if they become damaged. DO NOT use extension cords for 220V machinery. Make sure switch is in OFF position before reconnecting. Keep blades sharp and clean for best and safest performance. Follow instructions for lubricating and changing a
ملخص المحتوى في الصفحة رقم 10
A face shield used with safety glasses is recommended. Always keep hands and fingers away from the drill bit. Never hold a workpiece by hand while drilling! DO NOT wear gloves when operating the drill. Properly tighten and securely lock the drill bit in the chuck. Use only round, hex, or triangular shank drill bits, or tapered shank drill bits mated with the approp
ملخص المحتوى في الصفحة رقم 11
The Model M1039 is prewired for 110V opera- tion, but may be rewired for 220V operation. To do this, consult the wiring diagram in the back of this manual. Always connect this machine to a dedicated circuit (wire, breaker, plug, receptacle) with a verified ground, using the recommended circuit breakers and plugs/receptacles listed at the bottom of this page. Never replace a circuit breaker with one of higher amper- age without consulting a qualified electrician to ensure compliance
ملخص المحتوى في الصفحة رقم 12
If any parts are missing, examine the pack- aging for the missing parts. For any missing parts, find the part number in the back The Model M1039 has been carefully pack- of this manual and contact Woodstock aged for safe transporting. If you notice the machine has International, Inc. at (360) 734-3482 or at been damaged, please contact your authorized dealer immediately. The following is a description of the main components ® shipped with the Model M1039. Lay the
ملخص المحتوى في الصفحة رقم 13
This machine distributes a The table and other unpainted parts of your heavy load in a small footprint. Some floors machine type are coated with a waxy grease may require additional bracing to support that protects them from corrosion during ship- both machine and operator. ment. Clean this grease off with a solvent clean- er or citrus-based degreaser. DO NOT use chlo- Consider existing and rine-based solvents such as brake parts cleaner anticipated needs, size of material
ملخص المحتوى في الصفحة رقم 14
Although not required, we recommend that you mount your new machine to the floor. Because this is an optional step and floor materials may vary, floor mount- ing hardware is not included. Generally, you can either bolt your machine to the floor or mount it on machine mounts. Both options are described below. Whichever option you choose it will be necessary to use a precison level to level your machine. Lag shield anchors with lag bolts ( ) and anchor studs ( ) are two
ملخص المحتوى في الصفحة رقم 15
The column must be secured on the base to properly assemble your drill press. Hex Bolts Place the column on the base and align the mount- ing holes. Secure the column to the base with the four M12-1.75 x 45 hex bolts, as shown in . The table bracket must be installed as described to prop- Column secured to base. erly assemble your drill press. Place the pinion in the table bracket, as shown in , so the pinion and gear teeth mesh togeth- e
ملخص المحتوى في الصفحة رقم 16
Place the rack inside of the table bracket, mesh it together with the pinion, and slide the table sup- port/rack assembly over the column, as shown in . Slide the column ring over the column with the bev- eled edge facing down ( ), fit the beveled edge of the column ring over the rack, and tighten the setscrew. Sliding table bracket and rack over column. Install the crank handle over the pinion shaft, and tighten the setscrew in the crank handle agai
ملخص المحتوى في الصفحة رقم 17
The headstock must be mounted on the column/base assembly before the drill press can be operated. Moving and installing the headstock is a two-person job, at the very least. Although the headstock can be lifted directly onto the column while upright, doing so is difficult and potentially dangerous because of the heavy weight involved. We recommend sliding the column into the headstock, then tilting the entire assembly fully upright, as described and shown in this section. Set the t
ملخص المحتوى في الصفحة رقم 18
Chuck Key MT4/JT3 Arbor The drill chuck attaches to the spindle by means of the arbor, shown in . Matched tapers on the arbor and the inside of the chuck create a semi-permanent assembly when properly joined. Use mineral spirits to thoroughly clean the drill chuck, arbor, and spindle sockets and dry all sur- JT3 Drill Drift Key faces before assembly. Follow all safety warnings Chuck on the container of the mineral spirits. Chuck components and tools.
ملخص المحتوى في الصفحة رقم 19
Spindle Hub The downfeed handles must be installed to properly oper- Belt Cover ate the drill press. Knob Thread the handles into the pinion hub, as shown in , and tighten. Remove the screw that fastens the belt cover in place and install the belt cover knob in its place (see Downfeed handles and belt for location). cover knob installed. The table must be installed to properly support the workpiece during operation. Insert the table shaft into the table bracket. Tighten t
ملخص المحتوى في الصفحة رقم 20
Before installing a drill bit, test run the machine to iso- late any problems that may occur. Plug the drill press into the power supply. Turn the drill press ; if there is a problem, turn the drill press immediately. The drill press should run smoothly, with little or no vibration or rubbing noises. Strange or unusual noises should be investigated and corrected before operating the machine further. See for troubleshooting instructions. For your convenience, the adjustments listed
