ملخص المحتوى في الصفحة رقم 1
228
WELLSBLOOMFIELD,LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION
MANUAL
for
COUNTER TOP
GAS HOTPLATE
Model
H-2412G
INSTANT-ON
Includes
INSTALLATION
USE & CARE
Model H-2412G
Instant-On
FOR YOUR SAFETY
Do not store gasoline or other flammable liquids
in the vicinity of this or any other appliance.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
propert
ملخص المحتوى في الصفحة رقم 2
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking based upon the limitations in this warranty. Seller’s equipment manufactured by WELLS BLOOMFIELD, LLC is obligation under this warranty is limited to the repair of warranted against defects in materials and workmanship for defects without charge by a Wells Bloomfield factory a period of one year from the date of original inst
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS Thank You for purchasing this WARRANTY xi Wells Bloomfield appliance. SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 Proper installation, professional operation and consistent PRECAUTIONS & GENERAL INFORMATION 3 maintenance of this equipment AGENCY APPROVAL INFORMATION 3 will ensure that it gives you the INSTALLATION 4 very best performance and a long, INITIAL ADJUSTMENT 7 economical service life. OP
ملخص المحتوى في الصفحة رقم 4
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate FEATURES & OPERATING CONTROLS GRATE ASSEMBLY ACTUATOR DRIP TRAY HEADS REAR BURNER FRONT BURNER REAR BURNER CONTROL KNOB PILOT BURNERS FRONT BURNER CONTROL KNOB ADJUSTABLE LEGS Fig. 1 Countertop Gas Hotplate - Features & Operating Controls BURNERS Provide cooking heat Front and rear burners are individually controllable Removable for easy cleaning BURNER CONTROL Provide individual control of front and rear burn
ملخص المحتوى في الصفحة رقم 5
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments WARNING: only. FIRE HAZARD This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its In the event a gas odor is agents. detected, shut down the unit at the main gas shutoff and This hotplate must be installed by a technician qualified and certified or contact your local gas supplier licensed to ins
ملخص المحتوى في الصفحة رقم 6
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the hotplate from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for hotplate before connecting the hotplate to fuel gas or otherwise hidden damage and tested it performing any installation procedure. for proper operation. Refe
ملخص المحتوى في الصفحة رقم 7
INSTALLATION (continued) GAS APPLIANCE CODE COMPLIANCE DANGER: FIRE AND The installation of gas piping from the outlet side of the gas meter or EXPLOSION service regulator to the hotplate must be performed by a technician HAZARD qualified and certified or licensed to install gas-fired equipment. NEVER use an open flame to check for gas leaks. Fire and A licensed and qualified technician must perform the initial startup and explosion may result. adjustment of this appliance.
ملخص المحتوى في الصفحة رقم 8
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate INSTALLATION (continued) INSTALLING THE HOTPLATE DANGER: FIRE AND Refer to the nameplate. Verify the fuel type and pressure, which must EXPLOSION match the nameplate specifications. Connecting the hotplate to the HAZARD wrong fuel type and/or pressure will compromise the safety and/or NEVER use an open flame to performance of the appliance. check for gas leaks. Fire and The hotplate must be placed in i
ملخص المحتوى في الصفحة رقم 9
INITIAL ADJUSTMENT SET GAS PRESSURE: IMPORTANT: Pressure adjustment must Turn the gas shut-off valve OFF. be performed by a qualified A gas pressure test tap is provided on the gas supply manifold. technician only. Remove both burner control knobs and the front panel. Remove plug in gas pressure test tap and attach a manometer. Turn the shut-off valve ON. Light the pilot light and turn both gas control valves to HI. Depress both actuator heads. Rem
ملخص المحتوى في الصفحة رقم 10
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate OPERATION GENERAL OPERATIONAL NOTES WARNING: FIRE HAZARD Carefully read the description of the hotplate operation on the specification sheet. Do NOT use this appliance if it has been submerged in water. IF YOU SMELL GAS: Call a qualified technician to examine the appliance and to service or replace any component which has been submerged. Burners ¤ DO NOT try to light which have been allowed to become wet must be
ملخص المحتوى في الصفحة رقم 11
HI OPERATION (continued) WARNING: FIRE HAZARD WARNING: Turn control valves OFF when hotplate is not in use. FIRE HAZARD Failure to turn valves off will allow unattended burner to light should actuator be depressed. NEVER attempt to force or repair a stuck control valve. WARNING: FIRE AND EXPLOSION HAZARD Contact your Authorized Wells DO NOT set anything on grate other than cookware to be Service Agency for repairs. Forced or improperly heated. repaired
ملخص المحتوى في الصفحة رقم 12
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Pilot will not light Gas supply off Check main / unit gas valves Air in lines Turn gas valve on. Attempt to light pilot every 15 sec. Pilot valve not on Turn pilot valve on / adjust Pilot burner holes are plugged Clean pilot burner Front or rear burner Actuator not depressed Burner should light only when a won’t light pot or pan depresses actuator. Be sure actuator is
ملخص المحتوى في الصفحة رقم 13
CLEANING INSTRUCTIONS PREPARATION WARNING: Turn gas shut-off valve OFF before cleaning. FIRE HAZARD Allow hotplate to cool completely before cleaning. Shut off the gas supply valve FREQUENCY: Daily before cleaning. TOOLS Bristle Brush CAUTION: Clean Cloth or Sponge BURN HAZARD Mild Detergent Cleaner Formulated for Stainless Steel Allow hotplate to cool Warm Water completely before cleaning. IMPORTANT: DO NOT spill CLEANING or pour water into contro
ملخص المحتوى في الصفحة رقم 14
M228 306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate CLEANING INSTRUCTIONS (continued) 4. GRATE ASSEMBLY Sets in place above burners Actuator heads wrap around center bar of grate 3. DRIP TRAY Drops in place exposing 1. REAR BURNER tops of burners Slides over LEFT Actuator heads nozzle; hooks into REAR slots on pilot slide onto ends of actuator arms support F R 2.FRONT BURNER Slides over RIGHT nozzle; hooks into FRONT slots on Rear actuator arm pilot support threads through Front actuato
ملخص المحتوى في الصفحة رقم 15
PARTS & SERVICE DDESESCCRIPT RIPTIION ON PART SERVINO. CE IMPORTANT: Use only factory authorized service P ART NO. parts and replacement filters. LEGS, PLASTIC 4” Set of 4 20314 For factory authorized service, or to order factory DRIP TRAY, DUAL PILOT HOTPLATE 506706 authorized replacement parts, contact your Wells authorized service agency, or call: GRATE, STAINLESS STEEL 506707 Wells Bloomfield, LLC 2 Erik
ملخص المحتوى في الصفحة رقم 16
Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SER SERVICE VICE TRAINING TRAINING - - QUALITY QUALITY SER SERVICE VICE Genuine Parts Protect - YOU - All - Ways CUST CUSTOMER OMER SA SATISF TISFACTION ACTION WELLSBLOOMFIELD,LLC 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 telephone: 775-689-5703 fax: 775-689-5976 www.wellsbloomfield.com PRINTED IN UNITED STATES OF AMERICA
