ملخص المحتوى في الصفحة رقم 1
Indoor/Outdoor Electric Patio Heater
Model No: HP2-15-50
Operating Instructions
3098007
HP2-15-50
© 2007 Soleus Air International
ملخص المحتوى في الصفحة رقم 2
Thank you for choosing a Soleus Air Indoor/Outdoor Patio Heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number belo
ملخص المحتوى في الصفحة رقم 3
14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by pulling on the cord. 16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 17. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to perso
ملخص المحتوى في الصفحة رقم 4
PRODUCT DIAGRAM Heater Head Control Switches Base Pole Decorative Cone Weighted Base 4
ملخص المحتوى في الصفحة رقم 5
ASSEMBLY PARTS Remove all contents from the packaging. A The packaging includes the following items: A) 1 Heater head B) 1 Weighted Base C) 1 Decorative Cone E D) 1 Base Pole E) 2 Heater Head Connector Screws F) 3 Base Bolts C G) 3 Nuts for the base bolts H) 1 Assembly Wrench (Not Pictured) D I) 1 Allen Wrench (Not Pictured) F NOTE: The screws, bolts, assembly wrench, and Allen wrench are wrapped in a plastic bag and placed on the underside of the Styrofoam ne
ملخص المحتوى في الصفحة رقم 6
BASIC ASSEMBLY To properly assemble this heater you need the supplied assembly wrench and Allen wrench (or one of your own). Refer to the parts diagram on page 5 while assembling the heater. PLEASE NOTE: The design of the base in the images below will slightly differ from the base provided with the heater. 1) First, attach the base pole (D) to the weighted base (B) using the 3 base bolts (F) and 3 nuts (G). Once you secure the base pole (D) to the weighted base (B), place the decorat
ملخص المحتوى في الصفحة رقم 7
BASIC ASSEMBLY (CONTINUED) 4) Before using the heater, align the power cord with the cutout on the weighted base and secure using the attached fasteners on the bottom of the weighted base. There is one fastener located near the middle of the weighted base, and another fastener located near the cutout at the end of the base. Place the cord through each fastener and tighten to secure the cord to the base. After securing the power cord to the fasteners, place the rubber ring located around the
ملخص المحتوى في الصفحة رقم 8
OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate the heater when it is in the upright position and the base is attached. Refer to the diagram below. The HP2-15-50 Electric Patio Heater is equipped with three heat settings; Low, Medium, and High. • To operate the heater on low, press the red switch on the right. This switch will have a single white dot near the top. Once the low switch is pressed, the smaller
ملخص المحتوى في الصفحة رقم 9
MAINTENANCE Unplug the unit and let it cool completely. • To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. • DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. • Although this heater is outdoor approved, DO NOT immerse the heater in water for you
ملخص المحتوى في الصفحة رقم 10
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air HP2-15-50 Electric Patio Heater to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonabl
