Snapper Rear Tine دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SET-UP INSTRUCTIONS & PRE-OPERATIONAL CHECKLIST for SNAPPER
INTERMEDIATE REAR TINE TILLER

INTRODUCTION: Uncrate unit and check for any damage and report immediately. Make repairs as necessary. The
handle is shipped reversed and attached to the handle bracket to allow overall lower profile for shipment. The two #2-
8725 Hex Cap Screw and two #9-1606 Lock Nut in #6-1794 Hardware Bag are spare pieces for securing tines in case of
shear bolt failure during operation. Keep these pieces f

ملخص المحتوى في الصفحة رقم 2

PRE-OPERATIONAL CHECKLIST for SNAPPER INTERMEDIATE REAR TINE TILLER Snapper has completed initial adjustments and performed operational tests prior to shipping the machine. Due to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be verified and necessary final adjustments made at time of setup. It remains good practice and is strongly recommended that all the items also be checked prior to placing the machine into service. It is ver