ملخص المحتوى في الصفحة رقم 1
OPERATOR’S
MANUAL
Intermediate
Snowthrower Models
555 Models
Mfg. No. Description
1694587 555M, 5HP Snowthrower, Manual Start
1694595 555M, 5HP Snowthrower, Manual Start (Export)
85665 I5225, 5HP Snowthrower, Manual Start
80494 EI5225, 5HP Snowthrower, Manual Start (Export)
860 Models
Mfg. No. Description
85666 I8245E, 8HP OHV Snowthrower, Electric Start
80495 EI8245, 8HP OHV Snowthrower, Manual Start (Export)
1694588 860E, 8HP OHV Snowthrower, Electric Start
1694596 860M, 8HP OHV Snowthrower, M
ملخص المحتوى في الصفحة رقم 2
Table of Contents Safety Rules & Information Regular Maintenance Training ...................................................................2 Schedule ...............................................................17 Preparation .............................................................2 Checking Tire Pressure ........................................17 Operation ................................................................2 Checking Auger Gear Case Lubrication ...............17 Children..
ملخص المحتوى في الصفحة رقم 3
Safety Rules & Information This machine is capable of amputating hands and feet. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed. TRAINING OPERATION 1. Read, understand, and follow all instructions on the 1. Do not put hands or feet near or und
ملخص المحتوى في الصفحة رقم 4
Safety Rules 21. Keep in mind the operator is responsible for acci- 8. Always follow the engine manual instructions for stor- dents occurring to other people or property. age preparations before storing the unit for both short 22. Data indicates that operators, age 60 years and and long term periods. above, are involved in a large percentage of power 9. Always follow the engine manual instructions for equipment-related injuries. These operators should proper start-up procedures when returning t
ملخص المحتوى في الصفحة رقم 5
4
ملخص المحتوى في الصفحة رقم 6
S SA AM MP PL LE E S SA AM MP PL LE E Identification Numbers North American Models Mfg. No.: 169XXXX Serial No.: XXXXX 2002 dB(A) kW: XXX CE Models Engine RPM XXXX LpA: XXX dB(A) PRODUCT REFERENCE DATA Vibration: XXX m/s² Model Description Name/Number Simplicity Mfg. Inc. Port Washington, WI USA 53074-0997 Unit MFG Number Unit SERIAL Number Identification Numbers Mower Deck MFG Number Mower Deck SERIAL Number When contacting your authorized dealer for replace- ment parts, service, or informa
ملخص المحتوى في الصفحة رقم 7
Safety Decals All WARNING, CAUTION, and instructional messages GENERAL on your unit should be carefully read and obeyed. This unit has been designed and manufactured to pro- Personal bodily injury can result when these instructions vide you with the safety and reliability you would expect are not followed. The information is for your safety and it from an industry leader in outdoor power equipment is important. The safety decals below are on your unit. manufacturing. If any of these decals are
ملخص المحتوى في الصفحة رقم 8
CE Safety Icons & Compliance Specs Warning: Read Operator’s Manual. Warning: Dismemberment. Read and understand the Operator’s This machine can amputate limbs. Manual before using this machine. Keep bystanders and children away when engine is running. Danger: Dismemberment. Danger: Thrown Objects. This machine is capable of throwing The auger can amputate limbs. Keep objects and debris. Keep bystanders hands and feet away from auger and away. rotating parts. Warning: Remove Key Before Da
ملخص المحتوى في الصفحة رقم 9
Features, Controls, & Operation Please take a moment ALL MODELS and familiarize yourself with the name, location, and 1,2.. function of these controls so that you will better understand the safety and operating instructions provided in this manual. TECUMSEH MODELS BRIGGS & STRATTON MODELS 8
ملخص المحتوى في الصفحة رقم 10
Features & Controls CONTROL LOCATIONS The information below briefly describes the function of individual controls. Starting, stopping, and driving require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Speed Selector Fuel 1,2.. Selects forward speeds 1-5 and reverse speeds 1-2. Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fu
ملخص المحتوى في الصفحة رقم 11
Engine Controls STARTING CONTROLS Tecumseh L-Head See Figures 1 & 2 for the following instructions. B A Models Units with Optional Electric Start C A. Electric Start Button - The electric start button (A) activates an electric starter mounted to the engine, eliminating the need to pull the starter han- D dle. The electric start button operates on 120 Volts AC, which is provided by connection to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to
ملخص المحتوى في الصفحة رقم 12
Controls GROUND SPEED CONTROLS B A D C A. Speed Selector - This lever (A, Figures 3 & 4) is used to set the ground speed of the snowthrower. The snowthrower has five forward speeds, 1–5, and two reverse speeds, 1–2. No neutral position or gate is required, since the traction drive design automati- cally provides "neutral" (no forward or reverse move- ment), whenever the drive control is released. B. Traction & Free Hand™ Control - This control engages the traction drive as the lever (B, Figure
ملخص المحتوى في الصفحة رقم 13
Operation GENERAL OPERATION WARNING This unit is a “two-stage” snowthrower. CHECKS BEFORE EACH START-UP The first stage is the auger, which feeds the snow 1. Make sure all safety guards are in place and all nuts, back into the impeller housing. The second stage bolts and clips are secure. is the impeller, which throws the snow out the 2. Check to make sure that the clean-out tool is discharge chute. If bodily contact is made with attached to the handle on the machine. Do not oper- the auger or i
ملخص المحتوى في الصفحة رقم 14
Operation STARTING THE ENGINE Tecumseh 1. Turn the fuel valve (B, Figure 5 & 6) to the ON posi- B A Models tion. C 2. Insert the engine key (F) into the engine key slot and push fully in to the RUN position. 3. Move the throttle lever (E) fully up to the FAST posi- tion. D 4. Fully close the choke (G) if engine is cold. (Do not choke a warm engine.) E 5. Push the primerbutton (D) two times if engine is cold. (Do not prime a warm engine.) F G 6. Pull starter handle (C) rapidly, or push starter bu
ملخص المحتوى في الصفحة رقم 15
Operation OPERATING THE SNOWTHROWER B A D C 1. Rotate the discharge chute to the desired direction. 2. Set the speed selector to the desired forward speed. 3. Fully press and hold the auger control (C, Figure 7) on the right-hand grip to begin auger rotation. To dis- engage the auger, completely release the lever. 4. Fully press and hold the traction drive control lever (B, Figure 7) on the left-hand grip to engage the trac- tion drive and begin moving the snowthrower. To dis- engage the tract
ملخص المحتوى في الصفحة رقم 16
Operation DEFLECTOR Chute The distance of the discharged snow is mainly controlled Deflector Knob by the position of the deflector (Figure 9). (Engine speed also affects distance of discharge. Always operate at FULL throttle.) The more the deflector is tilted UP, the farther snow will be thrown. Loosen the deflector knob, tilt the deflector UP or DOWN, and then retighten the knob when the desired angle has been chosen. Chute Deflector Figure 9. Chute Deflector Adjustment SCRAPER BAR & SKID SHO
ملخص المحتوى في الصفحة رقم 17
Operation FREE-WHEELING AND TRACTION DRIVE LOCK For easy turning when pushing the snowthrower, you can disengage the traction drive at one or both wheels by using the traction lock pins (See Figures 11 & 12). Klik-Pin In 1. Turn the unit off, remove the engine key, and discon- OUTER Hole nect the spark plug wire. 2. To DISENGAGE the traction drive lock, insert the traction lock pin through the outer hole in the axle. (See Figure 11). 3. To ENGAGE the traction drive lock, insert the pin through t
ملخص المحتوى في الصفحة رقم 18
Regular Maintenance MAINTENANCE SCHEDULE MAINTENANCE REQUIRED FREQUENCY NOTES Winter Weight Check auger gear case lubrication.** 25 Hours Worm Gear Oil Lubricate snowthrower. 10 Hours 10W Oil and Grease Check tire pressure. Monthly 20 psi (1.37 bar) ✛ ✛ Change engine oil.* 50 Hours See Engine Manual ✛ Clean or replace spark plug. Yearly See Engine Manual Check drive linkage/belt tension. 4-6 Hours N/A Lubricate Axle Shafts. Yearly Lithium Grease Check / Lubricate Free-Hand Linkage. 10 Hours 10W
ملخص المحتوى في الصفحة رقم 19
Maintenance LUBRICATION IMPORTANT NOTE It is very important that grease fittings on the auger shaft are lubricated regularly. If auger rusts to shaft, damage to worm gear may occur if shear pins do not break. A To prevent wheels rusting to axles, it is also necessary to remove the wheels and grease the axles regularly. Remove wheels and grease axles once each year. B There are two grease fittings on the auger shaft. Wipe C the fittings clean and apply grease, using a grease gun. Also apply greas
ملخص المحتوى في الصفحة رقم 20
Storage LUBRICATION CHECK / LUBRICATE FREE-HAND LINKAGE Check the function of the Free-Hand controls: the con- trols should function as described in the CONTROLS section. It is critical for the safe operation of the unit that the controls disengage when released. If the controls do not function properly, lubricate them. If lubrication does not rectify the problem, see your dealer. Under no circumstances should the unit be used if the controls are not functioning properly. Figure 17. Lubricat
