Razor A 5 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

™
A 5 Lux Scooter
Owner’s Manu
Read and understand this entire manual before
allowing child to use this product!
For assistance contact Razor. DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not reflect exact appearance of actual product. Specifications subject to
change without notice.
Version: 1_01_10
al

ملخص المحتوى في الصفحة رقم 2

CONTENTS Safety Warnings ............................................................ 2 Safety Tips ..................................................................... 5 Before you begin ........................................................... 3 Warranty ........................................................................ 5 Set up and usage instructions (all models) .................... 3 Check Before Riding ................................................... 3-4 SAFETy WARNINgS

ملخص المحتوى في الصفحة رقم 3

BEFORE yOU BEgIN Remove contents from box. Remove the foam separators that protect the compon ents from damage during shipping. Inspect the contents of the box for scratches in the paint, dents that may have o ccurred during shipping. Because your WARNINg: DO scooter was assembled and packed at the factory , there should not be any problems, even if the box has a few NOT USE NON-RAZOR scars or dents. PRODUCTS WITH YOUR SCOOTER. Razor scooters have been built to certain Razor desi

ملخص المحتوى في الصفحة رقم 4

SET Up AND USAgE INSTRUCTIONS Unfolding the scooter for first time use. WARNINg: Failure to properly engage the spring-loaded buttons may cause the handlebars to dislodge while riding and may cause you to lose control and fall. When correctly engaged the handlebars will not rotate nor will they move sideways. Note that when properly engaged, the spring- loaded buttons are clearly visible in the holes on the T-tube. 1 Insert and secure the left and 2 Make certain the spring-load

ملخص المحتوى في الصفحة رقم 5

CHECk BEFORE RIDINg Baseboard/Steering Column Adjusting Screw(s). WARNINg: Keep your fingers clear of the pivoting mechanism when folding or unfolding the scooter. With the scooter in the upright and locked position, using a 3mm Allen wrench, adjust the set screw at the baseboard until there is no free-play between the baseboard and the steering column. Be careful not to over-tighten this screw as it only needs to be snug against the steering column. Verify the adjustment by releasin

ملخص المحتوى في الصفحة رقم 6

SAFETy REMINDERS pRE-RIDE CHECLIST k Loose parts Be Careful! Check and secure all fasteners before every ride. Make sure the You will see people on TV and maybe even people you know doing q q steering tube clamps, steering tube extension quick release, tricks and stunts. These are people who have been practicing on and handlebars spring buttons are locked properly in place scooters for a very long time. Don’t try something until you are before riding. ready. Avoid steep inclines and don’t